oscillator circuits



Almudena Suarez Analysis and Design of Autonomous Microwave Circuits Almudena Suarez Analysis and Design of Autonomous Microwave Circuits Новинка

Almudena Suarez Analysis and Design of Autonomous Microwave Circuits

14943.24 руб.
Presents simulation techniques that substantially increase designers' control over the oscillationin autonomous circuits This book facilitates a sound understanding of the free-running oscillation mechanism, the start-up from the noise level, and the establishment of the steady-state oscillation. It deals with the operation principles and main characteristics of free-running and injection-locked oscillators, coupled oscillators, and parametric frequency dividers. Analysis and Design of Autonomous Microwave Circuits provides: An exploration of the main nonlinear-analysis methods, with emphasis on harmonic balance and envelope transient methods Techniques for the efficient simulation of the most common autonomous regimes A presentation and comparison of the main stability-analysis methods in the frequency domain A detailed examination of the instabilization mechanisms that delimit the operation bands of autonomous circuits Coverage of techniques used to eliminate common types of undesired behavior, such as spurious oscillations, hysteresis, and chaos A thorough presentation of the oscillator phase noise A comparison of the main methodologies of phase-noise analysis Techniques for autonomous circuit optimization, based on harmonic balance A consideration of different design objectives: presetting the oscillation frequency and output power, increasing efficiency, modifying the transient duration, and imposing operation bands Analysis and Design of Autonomous Microwave Circuits is a valuable resource for microwave designers, oscillator designers, and graduate students in RF microwave design.
Pogorzelski Ronald J. Coupled-Oscillator Based Active-Array Antennas Pogorzelski Ronald J. Coupled-Oscillator Based Active-Array Antennas Новинка

Pogorzelski Ronald J. Coupled-Oscillator Based Active-Array Antennas

11877.96 руб.
Describing an innovative approach to phased-array control in antenna design This book explores in detail phased-array antennas that use coupled-oscillator arrays, an arrangement featuring a remarkably simple beam steering control system and a major reduction in complexity compared with traditional methods of phased-array control. It brings together in one convenient, self-contained volume the many salient research results obtained over the past ten to fifteen years in laboratories around the world, including the California Institute of Technology's Jet Propulsion Laboratory. The authors examine the underlying theoretical framework of coupled-oscillator systems, clearly explaining the linear and nonlinear formalisms used in the development of coupled-oscillator arrays, while introducing a variety of state-of-the-art methodologies, design solutions, and tools for applying this control scheme. Readers will find: Numerous implementation examples of coupled-oscillator array prototypes A continuum model that permits application of diffusion theory to the analysis of phase dynamics A demonstration of the array behavior through experimental results that validate the linearized theory Examples of how incorporating coupling delay restores causality, including the latest published results Guidance on how to accurately analyze and optimize coupled-oscillator arrays using modern simulation tools A review of current developments, including the design of compact couple-oscillator array antennas Complete with 150 diagrams and photographs, Coupled-Oscillator Based Active-Array Antennas is a highly useful tutorial for antenna designers and a valuable reference for researchers and engineers wishing to learn about this cutting-edge technology.
Thanos Stouraitis Arithmetic Circuits for DSP Applications Thanos Stouraitis Arithmetic Circuits for DSP Applications Новинка

Thanos Stouraitis Arithmetic Circuits for DSP Applications

9372.7 руб.
A comprehensive guide to the fundamental concepts, designs, and implementation schemes, performance considerations, and applications of arithmetic circuits for DSP Arithmetic Circuits for DSP Applications is a complete resource on arithmetic circuits for digital signal processing (DSP). It covers the key concepts, designs and developments of different types of arithmetic circuits, which can be used for improving the efficiency of implementation of a multitude of DSP applications. Each chapter includes various applications of the respective class of arithmetic circuits along with information on the future scope of research. Written for students, engineers, and researchers in electrical and computer engineering, this comprehensive text offers a clear understanding of different types of arithmetic circuits used for digital signal processing applications. The text includes contributions from noted researchers on a wide range of topics, including a review of circuits used in implementing basic operations like additions and multiplications; distributed arithmetic as a technique for the multiplier-less implementation of inner products for DSP applications; discussions on look up table-based techniques and their key applications; CORDIC circuits for calculation of trigonometric, hyperbolic and logarithmic functions; real and complex multiplications, division, and square-root; solution of linear systems; eigenvalue estimation; singular value decomposition; QR factorization and many other functions through the use of simple shift-add operations; and much more. This book serves as a comprehensive resource, which describes the arithmetic circuits as fundamental building blocks for state-of-the-art DSP and reviews in – depth the scope of their applications.
Behzad Razavi Design of Integrated Circuits for Optical Communications Behzad Razavi Design of Integrated Circuits for Optical Communications Новинка

Behzad Razavi Design of Integrated Circuits for Optical Communications

10115.42 руб.
The only book on integrated circuits for optical communications that fully covers High-Speed IOs, PLLs, CDRs, and transceiver design including optical communication The increasing demand for high-speed transport of data has revitalized optical communications, leading to extensive work on high-speed device and circuit design. With the proliferation of the Internet and the rise in the speed of microprocessors and memories, the transport of data continues to be the bottleneck, motivating work on faster communication channels. Design of Integrated Circuits for Optical Communications, Second Edition deals with the design of high-speed integrated circuits for optical communication transceivers. Building upon a detailed understanding of optical devices, the book describes the analysis and design of critical building blocks, such as transimpedance and limiting amplifiers, laser drivers, phase-locked loops, oscillators, clock and data recovery circuits, and multiplexers. The Second Edition of this bestselling textbook has been fully updated with: A tutorial treatment of broadband circuits for both students and engineers New and unique information dealing with clock and data recovery circuits and multiplexers A chapter dedicated to burst-mode optical communications A detailed study of new circuit developments for optical transceivers An examination of recent implementations in CMOS technology This text is ideal for senior graduate students and engineers involved in high-speed circuit design for optical communications, as well as the more general field of wireline communications.
Tertulien Ndjountche Digital Electronics 2. Sequential and Arithmetic Logic Circuits Tertulien Ndjountche Digital Electronics 2. Sequential and Arithmetic Logic Circuits Новинка

Tertulien Ndjountche Digital Electronics 2. Sequential and Arithmetic Logic Circuits

10123.22 руб.
As electronic devices become increasingly prevalent in everyday life, digital circuits are becoming even more complex and smaller in size. This book presents the basic principles of digital electronics in an accessible manner, allowing the reader to grasp the principles of combinational and sequential logic and the underlying techniques for the analysis and design of digital circuits. Providing a hands-on approach, this work introduces techniques and methods for establishing logic equations and designing and analyzing digital circuits. Each chapter is supplemented with practical examples and well-designed exercises with worked solutions. This second of three volumes focuses on sequential and arithmetic logic circuits. It covers various aspects related to the following topics: latch and flip-flop; binary counters; shift registers; arithmetic and logic circuits; digital integrated circuit technology; semiconductor memory; programmable logic circuits. Along with the two accompanying volumes, this book is an indispensable tool for students at a bachelors or masters level seeking to improve their understanding of digital electronics, and is detailed enough to serve as a reference for electronic, automation and computer engineers.
Giovanni Bianchi Microwave and RF Engineering Giovanni Bianchi Microwave and RF Engineering Новинка

Giovanni Bianchi Microwave and RF Engineering

12746.87 руб.
An essential text for both students and professionals, combining detailed theory with clear practical guidance This outstanding book explores a large spectrum of topics within microwave and radio frequency (RF) engineering, encompassing electromagnetic theory, microwave circuits and components. It provides thorough descriptions of the most common microwave test instruments and advises on semiconductor device modelling. With examples taken from the authors' own experience, this book also covers: network and signal theory; electronic technology with guided electromagnetic propagation; microwave circuits such as linear and non-linear circuits, resonant circuits and cavities, monolithic microwave circuits (MMICs), wireless architectures and integrated circuits; passive microwave components, control components; microwave filters and matching networks. Simulation files are included in a CD Rom, found inside the book. Microwave and RF Engineering presents up-to-date research and applications at different levels of difficulty, creating a useful tool for a first approach to the subject as well as for subsequent in-depth study. It is therefore indispensable reading for advanced professionals and designers who operate at high frequencies as well as senior students who are first approaching the subject.
Tertulien Ndjountche Digital Electronics, Volume 1. Combinational Logic Circuits Tertulien Ndjountche Digital Electronics, Volume 1. Combinational Logic Circuits Новинка

Tertulien Ndjountche Digital Electronics, Volume 1. Combinational Logic Circuits

9748.31 руб.
The omnipresence of electronic devices in our everyday lives has been accompanied by the downscaling of chip feature sizes and the ever increasing complexity of digital circuits. This book is devoted to the analysis and design of digital circuits, where the signal can assume only two possible logic levels. It deals with the basic principles and concepts of digital electronics. It addresses all aspects of combinational logic and provides a detailed understanding of logic gates that are the basic components in the implementation of circuits used to perform functions and operations of Boolean algebra. Combinational logic circuits are characterized by outputs that depend only on the actual input values. Efficient techniques to derive logic equations are proposed together with methods of analysis and synthesis of combinational logic circuits. Each chapter is well structured and is supplemented by a selection of solved exercises covering logic design practices.
Luca Roselli Microwave and Millimeter Wave Circuits and Systems. Emerging Design, Technologies and Applications Luca Roselli Microwave and Millimeter Wave Circuits and Systems. Emerging Design, Technologies and Applications Новинка

Luca Roselli Microwave and Millimeter Wave Circuits and Systems. Emerging Design, Technologies and Applications

11993.49 руб.
Microwave and Millimeter Wave Circuits and Systems: Emerging Design, Technologies and Applications provides a wide spectrum of current trends in the design of microwave and millimeter circuits and systems. In addition, the book identifies the state-of-the art challenges in microwave and millimeter wave circuits systems design such as behavioral modeling of circuit components, software radio and digitally enhanced front-ends, new and promising technologies such as substrate-integrated-waveguide (SIW) and wearable electronic systems, and emerging applications such as tracking of moving targets using ultra-wideband radar, and new generation satellite navigation systems. Each chapter treats a selected problem and challenge within the field of Microwave and Millimeter wave circuits, and contains case studies and examples where appropriate. Key Features: Discusses modeling and design strategies for new appealing applications in the domain of microwave and millimeter wave circuits and systems Written by experts active in the Microwave and Millimeter Wave frequency range (industry and academia) Addresses modeling/design/applications both from the circuit as from the system perspective Covers the latest innovations in the respective fields Each chapter treats a selected problem and challenge within the field of Microwave and Millimeter wave circuits, and contains case studies and examples where appropriate This book serves as an excellent reference for engineers, researchers, research project managers and engineers working in R&D, professors, and post-graduates studying related courses. It will also be of interest to professionals working in product development and PhD students.
Ozgur Ergul Introduction to Electrical Circuit Analysis Ozgur Ergul Introduction to Electrical Circuit Analysis Новинка

Ozgur Ergul Introduction to Electrical Circuit Analysis

9731.95 руб.
A concise and original presentation of the fundamentals for ‘new to the subject’ electrical engineers This book has been written for students on electrical engineering courses who don’t necessarily possess prior knowledge of electrical circuits. Based on the author’s own teaching experience, it covers the analysis of simple electrical circuits consisting of a few essential components using fundamental and well-known methods and techniques. Although the above content has been included in other circuit analysis books, this one aims at teaching young engineers not only from electrical and electronics engineering, but also from other areas, such as mechanical engineering, aerospace engineering, mining engineering, and chemical engineering, with unique pedagogical features such as a puzzle-like approach and negative-case examples (such as the unique “When Things Go Wrong…” section at the end of each chapter). Believing that the traditional texts in this area can be overwhelming for beginners, the author approaches his subject by providing numerous examples for the student to solve and practice before learning more complicated components and circuits. These exercises and problems will provide instructors with in-class activities and tutorials, thus establishing this book as the perfect complement to the more traditional texts. All examples and problems contain detailed analysis of various circuits, and are solved using a ‘recipe’ approach, providing a code that motivates students to decode and apply to real-life engineering scenarios Covers the basic topics of resistors, voltage and current sources, capacitors and inductors, Ohm’s and Kirchhoff’s Laws, nodal and mesh analysis, black-box approach, and Thevenin/Norton equivalent circuits for both DC and AC cases in transient and steady states Aims to stimulate interest and discussion in the basics, before moving on to more modern circuits with higher-level components Includes more than 130 solved examples and 120 detailed exercises with supplementary solutions Accompanying website to provide supplementary materials www.wiley.com/go/ergul4412
John Shynk J. Mathematical Foundations for Linear Circuits and Systems in Engineering John Shynk J. Mathematical Foundations for Linear Circuits and Systems in Engineering Новинка

John Shynk J. Mathematical Foundations for Linear Circuits and Systems in Engineering

10497.42 руб.
Extensive coverage of mathematical techniques used in engineering with an emphasis on applications in linear circuits and systems Mathematical Foundations for Linear Circuits and Systems in Engineering provides an integrated approach to learning the necessary mathematics specifically used to describe and analyze linear circuits and systems. The chapters develop and examine several mathematical models consisting of one or more equations used in engineering to represent various physical systems. The techniques are discussed in-depth so that the reader has a better understanding of how and why these methods work. Specific topics covered include complex variables, linear equations and matrices, various types of signals, solutions of differential equations, convolution, filter designs, and the widely used Laplace and Fourier transforms. The book also presents a discussion of some mechanical systems that mathematically exhibit the same dynamic properties as electrical circuits. Extensive summaries of important functions and their transforms, set theory, series expansions, various identities, and the Lambert W-function are provided in the appendices. The book has the following features: Compares linear circuits and mechanical systems that are modeled by similar ordinary differential equations, in order to provide an intuitive understanding of different types of linear time-invariant systems. Introduces the theory of generalized functions, which are defined by their behavior under an integral, and describes several properties including derivatives and their Laplace and Fourier transforms. Contains numerous tables and figures that summarize useful mathematical expressions and example results for specific circuits and systems, which reinforce the material and illustrate subtle points. Provides access to a companion website that includes a solutions manual with MATLAB code for the end-of-chapter problems. Mathematical Foundations for Linear Circuits and Systems in Engineering is written for upper undergraduate and first-year graduate students in the fields of electrical and mechanical engineering. This book is also a reference for electrical, mechanical, and computer engineers as well as applied mathematicians. John J. Shynk, PhD, is Professor of Electrical and Computer Engineering at the University of California, Santa Barbara. He was a Member of Technical Staff at Bell Laboratories, and received degrees in systems engineering, electrical engineering, and statistics from Boston University and Stanford University.
Ismail Kasikci Short Circuits in Power Systems. A Practical Guide to IEC 60909-0 Ismail Kasikci Short Circuits in Power Systems. A Practical Guide to IEC 60909-0 Новинка

Ismail Kasikci Short Circuits in Power Systems. A Practical Guide to IEC 60909-0

10123.22 руб.
Reflecting the changes to the all-important short circuit calculations in three-phase power systems according to IEC 60909-0 standard, this new edition of the practical guide retains its proven and unique concept of explanations, calculations and real-life examples of short circuits in electrical networks. It has also been completely revised and expanded by 20% to include the standard-compliant prevention of short circuits in electrical networks for photovoltaics and wind energy. By understanding the theory any software allows users to perform all the necessary calculations with ease so they can work on the design and application of low- and high-voltage power systems. This book is a practitioner's guide intended for students, electrical engineers, engineers in power technology, the electrotechnical industry, engineering consultants, energy suppliers, chemical engineers and physicists in industry.
Christian Rumelhard Microwaves Photonic Links. Components and Circuits Christian Rumelhard Microwaves Photonic Links. Components and Circuits Новинка

Christian Rumelhard Microwaves Photonic Links. Components and Circuits

17171.06 руб.
This book presents the electrical models for the different elements of a photonic microwave link like lasers, external modulators, optical fibers, photodiodes and phototransistors. The future trends of these components are also introduced: lasers to VCSEL, external modulators to electro-absorption modulators, glass optical fibers to plastic optical fibers, photodiodes to UTC photodiodes or phototransistors. It also describes an original methodology to evaluate the performance of a microwave photonic link, based on the developed elcetrical models, that can be easily incorporated in commercial electrical circuits simulation software to simulate this complete link.
Steven Blume W. High Voltage Protection for Telecommunications Steven Blume W. High Voltage Protection for Telecommunications Новинка

Steven Blume W. High Voltage Protection for Telecommunications

7889.26 руб.
Sets forth the steps needed to protect critical telecommunications circuits from power faults and lightning in high voltage environments The need to protect telecommunications circuits from power faults and lightning has never been greater: when power outages or system disturbances occur, reliable telecommunications are essential. With this book as their guide, readers will know what they need to do (and not do) to protect critical telecommunications circuits and equipment located in high voltage environments such as electrical power plants, substations, and power towers. Moreover, the book explains how to get the job done safely, detailing the proper implementation of safety procedures and the use of protective equipment to eliminate or minimize risk. Setting the foundation, the book begins with an overview of the problem, key issues, industry standards, and safety concerns. Next, it covers: Definitions and fundamentals of electric power systems, with regard to HVPT applications Causes, boundary conditions, and calculations of ground potential rise Critical telecommunications circuits that must be protected in high voltage environments Protection schemes and equipment to resolve ground potential rise problems Effective installation and testing of high voltage interface equipment Personal safety for telecommunications personnel working with equipment in high voltage environments Throughout the book, the author refers to accepted industry standards and best practices. Written by one of the most respected professional trainers in the telecommunications industry, High Voltage Protection for Telecommunications can be used for professional training courses or self-study. It will enable readers to protect critical data and voice communications circuits from high voltage events and protect themselves during equipment installation and maintenance.
Hussein Baher Signal Processing and Integrated Circuits Hussein Baher Signal Processing and Integrated Circuits Новинка

Hussein Baher Signal Processing and Integrated Circuits

7586.57 руб.
This book provides a balanced account of analog, digital and mixed-mode signal processing with applications in telecommunications. Part I Perspective gives an overview of the areas of Systems on a Chip (Soc) and mobile communication which are used to demonstrate the complementary relationship between analog and digital systems. Part II Analog (continuous-time) and Digital Signal Processing contains both fundamental and advanced analysis, and design techniques, of analog and digital systems. This includes analog and digital filter design; fast Fourier transform (FFT) algorithms; stochastic signals; linear estimation and adaptive filters. Part III Analog MOS Integrated Circuits for Signal Processing covers basic MOS transistor operation and fabrication through to the design of complex integrated circuits such as high performance Op Amps, Operational Transconductance Amplifiers (OTA's) and Gm-C circuits. Part IV Switched-capacitor and Mixed-mode Signal Processing outlines the design of switched-capacitor filters, and concludes with sigma-delta data converters as an extensive application of analog and digital signal processing Contains the fundamentals and advanced techniques of continuous-time and discrete-time signal processing. Presents in detail the design of analog MOS integrated circuits for signal processing, with application to the design of switched-capacitor filters. Uses the comprehensive design of integrated sigma-delta data converters to illustrate and unify the techniques of signal processing. Includes solved examples, end of chapter problems and MATLAB® throughout the book, to help readers understand the mathematical complexities of signal processing. The treatment of the topic is at the senior undergraduate to graduate and professional levels, with sufficient introductory material for the book to be used as a self-contained reference.
Christophe Basso P. Linear Circuit Transfer Functions. An Introduction to Fast Analytical Techniques Christophe Basso P. Linear Circuit Transfer Functions. An Introduction to Fast Analytical Techniques Новинка

Christophe Basso P. Linear Circuit Transfer Functions. An Introduction to Fast Analytical Techniques

9748.31 руб.
Linear Circuit Transfer Functions: An introduction to Fast Analytical Techniques teaches readers how to determine transfer functions of linear passive and active circuits by applying Fast Analytical Circuits Techniques. Building on their existing knowledge of classical loop/nodal analysis, the book improves and expands their skills to unveil transfer functions in a swift and efficient manner. Starting with simple examples, the author explains step-by-step how expressing circuits time constants in different configurations leads to writing transfer functions in a compact and insightful way. By learning how to organize numerators and denominators in the fastest possible way, readers will speed-up analysis and predict the frequency response of simple to complex circuits. In some cases, they will be able to derive the final expression by inspection, without writing a line of algebra. Key features: Emphasizes analysis through employing time constant-based methods discussed in other text books but not widely used or explained. Develops current techniques on transfer functions, to fast analytical techniques leading to low-entropy transfer functions immediately exploitable for analysis purposes. Covers calculation techniques pertinent to different fields, electrical, electronics, signal processing etc. Describes how a technique is applied and demonstrates this through real design examples. All Mathcad® files used in examples and problems are freely available for download. An ideal reference for electronics or electrical engineering professionals as well as BSEE and MSEE students, this book will help teach them how to: become skilled in the art of determining transfer function by using less algebra and obtaining results in a more effectual way; gain insight into a circuit’s operation by understanding how time constants rule dynamic responses; apply Fast Analytical Techniques to simple and complicated circuits, passive or active and be more efficient at solving problems.
David Peelo F. Current Interruption Transients Calculation David Peelo F. Current Interruption Transients Calculation Новинка

David Peelo F. Current Interruption Transients Calculation

11494.8 руб.
Provides an original, detailed and practical description of current interruption transients, origins, and the circuits involved, and how they can be calculated Current Interruption Transients Calculationis a comprehensive resource for the understanding, calculation and analysis of the transient recovery voltages (TRVs) and related re-ignition or re-striking transients associated with fault current interruption and the switching of inductive and capacitive load currents in circuits. This book provides an original, detailed and practical description of current interruption transients, origins, and the circuits involved, and how they can be calculated and then analysed using only a hand calculator and a spreadsheet program. Key features: Detailed theory on all of the current interruption cases that can occur on a power system. Clear explanation on how to calculate transients, showing how four basic circuits can represent all transients and can be solved in general without any use of the ‘classical’ Laplace transform method. Series and parallel RLC circuit theory, followed by the calculation of pole factors using the symmetrical component method to derive the base power frequency components, with results applied to all the relevant transient cases. Fault current interruption and inductive and capacitive load current switching cases illustrated using real application examples. With its practical approach, this book offers engineers the tools they need when analysing circuit breaker applications. It will be of great interest to practicing engineers and electric utility staff involved in circuit breaker design, specification, testing, switchgear application, system operation and planning, and in particular, for engineers using simulation programs for transient calculations. It will also be useful for senior undergraduate and postgraduate electrical power engineering students looking to work in switchgear manufacturers and testing laboratories.
Ralph Morrison Grounding and Shielding. Circuits and Interference Ralph Morrison Grounding and Shielding. Circuits and Interference Новинка

Ralph Morrison Grounding and Shielding. Circuits and Interference

8622.88 руб.
Applies basic field behavior in circuit design and demonstrates how it relates to grounding and shielding requirements and techniques in circuit design This book connects the fundamentals of electromagnetic theory to the problems of interference in all types of electronic design. The text covers power distribution in facilities, mixing of analog and digital circuitry, circuit board layout at high clock rates, and meeting radiation and susceptibility standards. The author examines the grounding and shielding requirements and techniques in circuit design and applies basic physics to circuit behavior. The sixth edition of this book has been updated with new material added throughout the chapters where appropriate. The presentation of the book has also been rearranged in order to reflect the current trends in the field. Grounding and Shielding: Circuits and Interference, Sixth Edition: Includes new material on vias and field control, capacitors as transmission lines, first energy sources, and high speed designs using boards with only two layers Demonstrates how circuit geometry controls performance from dc to gigahertz Examines the use of multi-shielded transformers in clean-power installations Provides effective techniques for handling noise problems in analog and digital circuits Discusses how to use conductor geometry to improve performance, limit radiation, and reduce susceptibility to all types of hardware and systems Grounding and Shielding: Circuits and Interference, Sixth Edition is an updated guide for circuit design engineers and technicians. It will also serve as a reference for engineers in the semiconductor device industry.
Zhang Bo Sneak Circuits of Power Electronic Converters Zhang Bo Sneak Circuits of Power Electronic Converters Новинка

Zhang Bo Sneak Circuits of Power Electronic Converters

13027.44 руб.
The first treatment of advanced knowledge of electrical sneak circuits and its analysis method in power electronics The work on sneak circuit and its analysis methods for power converters contributes to the reliability of power electronic systems worldwide. Most books in the subject concentrate on electronic systems, but this book is perhaps the first to examine power electronic systems. It describes the sneak circuit phenomena in power converters, introduces some SCA methods for power electronic systems and proposes how to eliminate and make use of sneak circuits. The book is divided into three separate sections. Firstly, the sneak circuit paths and sneak circuit operating conditions are discussed in different kinds of power converters, including resonant switched capacitor converters, basic DC-DC converters, soft-switching converters and Z-source converters; Secondly, the sneak circuit analysis guidelines for power converters based on generalized matrix, adjacency matrix and Boolean matrix are presented respectively; Thirdly, the sneak circuit elimination techniques are introduced and verified in several power converters, with applications of sneak circuits described in conclusion. Written by a lead author with extensive academic and industrial experience, the book provides a complete introduction and reference to students and professionals alike. Contents include: Fundamental Concepts, SCA of Resonant Switched Capacitor Converters, SC of DC-DC Converters, SC Analysis Method (including Boolian Matrix), and Applications of SC in Power Converters. Highlights the advanced research works in the sneak circuit analysis, by a leading author in the field Original in its treatment of power electronics converters; most other books concentrating on electronics systems, and aimed at both introductory and advanced levels Offers guidelines for industry professionals involved in the design of power electronic systems, enabling early detection of potential problems Essential reading for Graduate students in Electrical Engineering: Engineers and Researchers in Power Electronics
Milan Mashanovitch L. Diode Lasers and Photonic Integrated Circuits Milan Mashanovitch L. Diode Lasers and Photonic Integrated Circuits Новинка

Milan Mashanovitch L. Diode Lasers and Photonic Integrated Circuits

11696.84 руб.
Diode Lasers and Photonic Integrated Circuits, Second Edition provides a comprehensive treatment of optical communication technology, its principles and theory, treating students as well as experienced engineers to an in-depth exploration of this field. Diode lasers are still of significant importance in the areas of optical communication, storage, and sensing. Using the the same well received theoretical foundations of the first edition, the Second Edition now introduces timely updates in the technology and in focus of the book. After 15 years of development in the field, this book will offer brand new and updated material on GaN-based and quantum-dot lasers, photonic IC technology, detectors, modulators and SOAs, DVDs and storage, eye diagrams and BER concepts, and DFB lasers. Appendices will also be expanded to include quantum-dot issues and more on the relation between spontaneous emission and gain.
Henri Baudrand The Wave Concept in Electromagnetism and Circuits. Theory and Applications Henri Baudrand The Wave Concept in Electromagnetism and Circuits. Theory and Applications Новинка

Henri Baudrand The Wave Concept in Electromagnetism and Circuits. Theory and Applications

8622.88 руб.
The Wave Concept Iterative Procedure (WCIP) method has found an increasing number of users within electromagnetic theory and applications to planar circuits, antennas and diffraction problems. This book introduces in detail this new formulation of integral methods, based on the use of a wave concept with two bounded operators, and applications in a variety of domains in electromagnetics. This approach presents a number of benefits over other integral methods, including overcoming the problem of singularity, and reduced computing time. Through the presentation of mathematical equations to characterize studied structures and explanation of the curves obtained, via validated examples, the authors provide a thorough background to electromagnetism as well as a professional reference to students and researchers.
John Santiago Circuit Analysis For Dummies John Santiago Circuit Analysis For Dummies Новинка

John Santiago Circuit Analysis For Dummies

1465.86 руб.
Circuits overloaded from electric circuit analysis? Many universities require that students pursuing a degree in electrical or computer engineering take an Electric Circuit Analysis course to determine who will «make the cut» and continue in the degree program. Circuit Analysis For Dummies will help these students to better understand electric circuit analysis by presenting the information in an effective and straightforward manner. Circuit Analysis For Dummies gives you clear-cut information about the topics covered in an electric circuit analysis courses to help further your understanding of the subject. By covering topics such as resistive circuits, Kirchhoff's laws, equivalent sub-circuits, and energy storage, this book distinguishes itself as the perfect aid for any student taking a circuit analysis course. Tracks to a typical electric circuit analysis course Serves as an excellent supplement to your circuit analysis text Helps you score high on exam day Whether you're pursuing a degree in electrical or computer engineering or are simply interested in circuit analysis, you can enhance you knowledge of the subject with Circuit Analysis For Dummies.
R. Baker Jacob CMOS. Circuit Design, Layout, and Simulation R. Baker Jacob CMOS. Circuit Design, Layout, and Simulation Новинка

R. Baker Jacob CMOS. Circuit Design, Layout, and Simulation

11341.54 руб.
The Third Edition of CMOS Circuit Design, Layout, and Simulation continues to cover the practical design of both analog and digital integrated circuits, offering a vital, contemporary view of a wide range of analog/digital circuit blocks including: phase-locked-loops, delta-sigma sensing circuits, voltage/current references, op-amps, the design of data converters, and much more. Regardless of one's integrated circuit (IC) design skill level, this book allows readers to experience both the theory behind, and the hands-on implementation of, complementary metal oxide semiconductor (CMOS) IC design via detailed derivations, discussions, and hundreds of design, layout, and simulation examples.
Shih-Chii Liu Event-Based Neuromorphic Systems Shih-Chii Liu Event-Based Neuromorphic Systems Новинка

Shih-Chii Liu Event-Based Neuromorphic Systems

11247.23 руб.
Neuromorphic electronic engineering takes its inspiration from the functioning of nervous systems to build more power efficient electronic sensors and processors. Event-based neuromorphic systems are inspired by the brain's efficient data-driven communication design, which is key to its quick responses and remarkable capabilities. This cross-disciplinary text establishes how circuit building blocks are combined in architectures to construct complete systems. These include vision and auditory sensors as well as neuronal processing and learning circuits that implement models of nervous systems. Techniques for building multi-chip scalable systems are considered throughout the book, including methods for dealing with transistor mismatch, extensive discussions of communication and interfacing, and making systems that operate in the real world. The book also provides historical context that helps relate the architectures and circuits to each other and that guides readers to the extensive literature. Chapters are written by founding experts and have been extensively edited for overall coherence. This pioneering text is an indispensable resource for practicing neuromorphic electronic engineers, advanced electrical engineering and computer science students and researchers interested in neuromorphic systems. Key features: Summarises the latest design approaches, applications, and future challenges in the field of neuromorphic engineering. Presents examples of practical applications of neuromorphic design principles. Covers address-event communication, retinas, cochleas, locomotion, learning theory, neurons, synapses, floating gate circuits, hardware and software infrastructure, algorithms, and future challenges.
Steven Voldman H. ESD. Circuits and Devices Steven Voldman H. ESD. Circuits and Devices Новинка

Steven Voldman H. ESD. Circuits and Devices

8348.99 руб.
ESD: Circuits and Devices 2nd Edition provides a clear picture of layout and design of digital, analog, radio frequency (RF) and power applications for protection from electrostatic discharge (ESD), electrical overstress (EOS), and latchup phenomena from a generalist perspective and design synthesis practices providing optimum solutions in advanced technologies. New features in the 2nd edition: Expanded treatment of ESD and analog design of passive devices of resistors, capacitors, inductors, and active devices of diodes, bipolar junction transistors, MOSFETs, and FINFETs. Increased focus on ESD power clamps for power rails for CMOS, Bipolar, and BiCMOS. Co-synthesizing of semiconductor chip architecture and floor planning with ESD design practices for analog, and mixed signal applications Illustrates the influence of analog design practices on ESD design circuitry, from integration, synthesis and layout, to symmetry, matching, inter-digitation, and common centroid techniques. Increased emphasis on system-level testing conforming to IEC 61000-4-2 and IEC 61000-4-5. Improved coverage of low-capacitance ESD, scaling of devices and oxide scaling challenges. ESD: Circuits and Devices 2nd Edition is an essential reference to ESD, circuit & semiconductor engineers and quality, reliability &analysis engineers. It is also useful for graduate and undergraduate students in electrical engineering, semiconductor sciences, microelectronics and IC design.
Fabien Ndagijimana Signal Integrity. From High Speed to Radiofrequency Applications Fabien Ndagijimana Signal Integrity. From High Speed to Radiofrequency Applications Новинка

Fabien Ndagijimana Signal Integrity. From High Speed to Radiofrequency Applications

7344.49 руб.
This book presents the necessary concepts for the design and testing of radiofrequency and high-speed circuits. Signal and propagation theory is presented for the various circuit levels, from the chip to the PCB. The co-existence of high-speed wideband signals of radiofrequency signals and supply circuits is developed in order to provide design rules for engineers and Masters-level students. The subjects covered include: interconnections and signal integrity; spectral analysis techniques for high-speed signals; design techniques for signal integrity; the transmission-line concept; methods for temporal analysis and techniques for frequency domain analysis for connectics.
Rohde Ulrich L. RF / Microwave Circuit Design for Wireless Applications Rohde Ulrich L. RF / Microwave Circuit Design for Wireless Applications Новинка

Rohde Ulrich L. RF / Microwave Circuit Design for Wireless Applications

12640.45 руб.
Provides researchers and engineers with a complete set of modeling, design, and implementation tools for tackling the newest IC technologies Revised and completely updated, RF/Microwave Circuit Design for Wireless Applications, Second Edition is a unique, state-of-the-art guide to wireless integrated circuit design that provides researchers and engineers with a complete set of modeling, design, and implementation tools for tackling even the newest IC technologies. It emphasizes practical design solutions for high-performance devices and circuitry, incorporating ample examples of novel and clever circuits from high-profile companies. Complete with excellent appendices containing working models and CAD-based applications, this powerful one-stop resource: Covers the entire area of circuit design for wireless applications Discusses the complete system for which circuits are designed as well as the device technologies on which the devices and circuits are based Presents theory as well as practical issues Introduces wireless systems and modulation types Takes a systematic approach that differentiates between designing for battery-operated devices and base-station design RF/Microwave Circuit Design for Wireless Applications, Second Edition is an indispensable tool for circuit designers; engineers who design wireless communications systems; and researchers in semiconductor technologies, telecommunications, and wireless transmission systems.
Steven Voldman H. ESD. Analog Circuits and Design Steven Voldman H. ESD. Analog Circuits and Design Новинка

Steven Voldman H. ESD. Analog Circuits and Design

10047.81 руб.
A comprehensive and in-depth review of analog circuit layout, schematic architecture, device, power network and ESD design This book will provide a balanced overview of analog circuit design layout, analog circuit schematic development, architecture of chips, and ESD design. It will start at an introductory level and will bring the reader right up to the state-of-the-art. Two critical design aspects for analog and power integrated circuits are combined. The first design aspect covers analog circuit design techniques to achieve the desired circuit performance. The second and main aspect presents the additional challenges associated with the design of adequate and effective ESD protection elements and schemes. A comprehensive list of practical application examples is used to demonstrate the successful combination of both techniques and any potential design trade-offs. Chapter One looks at analog design discipline, including layout and analog matching and analog layout design practices. Chapter Two discusses analog design with circuits, examining: single transistor amplifiers; multi-transistor amplifiers; active loads and more. The third chapter covers analog design layout (also MOSFET layout), before Chapters Four and Five discuss analog design synthesis. The next chapters introduce the reader to analog-digital mixed signal design synthesis, analog signal pin ESD networks, and analog ESD power clamps. Chapter Nine, the last chapter, covers ESD design in analog applications. Clearly describes analog design fundamentals (circuit fundamentals) as well as outlining the various ESD implications Covers a large breadth of subjects and technologies, such as CMOS, LDMOS, BCD, SOI, and thick body SOI Establishes an “ESD analog design” discipline that distinguishes itself from the alternative ESD digital design focus Focuses on circuit and circuit design applications Assessible, with the artwork and tutorial style of the ESD book series PowerPoint slides are available for university faculty members Even in the world of digital circuits, analog and power circuits are two very important but under-addressed topics, especially from the ESD aspect. Dr. Voldman’s new book will serve as an essential and practical guide to the greater IC community. With high practical and academic values this book is a “bible” for professionals, graduate students, device and circuit designers for investigating the physics of ESD and for product designs and testing.
Graeme Vertigan AC Circuits and Power Systems in Practice Graeme Vertigan AC Circuits and Power Systems in Practice Новинка

Graeme Vertigan AC Circuits and Power Systems in Practice

9372.7 руб.
The essential guide that combines power system fundamentals with the practical aspects of equipment design and operation in modern power systems Written by an experienced power engineer, AC Circuits and Power Systems in Practice offers a comprehensive guide that reviews power system fundamentals and network theorems while exploring the practical aspects of equipment design and application. The author covers a wide-range of topics including basic circuit theorems, phasor diagrams, per-unit quantities and symmetrical component theory, as well as active and reactive power and their effects on network stability, voltage support and voltage collapse. Magnetic circuits, reactor and transformer design are analyzed, as is the operation of step voltage regulators. In addition, detailed introductions are provided to earthing systems in LV and MV networks, the adverse effects of harmonics on power equipment and power system protection. Finally, European and American engineering standards are presented where appropriate throughout the text, to familiarize the reader with their use and application. This book is written as a practical power engineering text for engineering students and recent graduates. It contains more than 400 illustrations and is designed to provide the reader with a broad introduction to the subject and to facilitate further study. Many of the examples included come from industry and are not normally covered in undergraduate syllabi. They are provided to assist in bridging the gap between tertiary study and industrial practice, and to assist the professional development of recent graduates. The material presented is easy to follow and includes both mathematical and visual representations using phasor diagrams. Problems included at the end of most chapters are designed to walk the reader through practical applications of the associated theory.
Er-Ping Li Electrical Modeling and Design for 3D System Integration. 3D Integrated Circuits and Packaging, Signal Integrity, Power Integrity and EMC Er-Ping Li Electrical Modeling and Design for 3D System Integration. 3D Integrated Circuits and Packaging, Signal Integrity, Power Integrity and EMC Новинка

Er-Ping Li Electrical Modeling and Design for 3D System Integration. 3D Integrated Circuits and Packaging, Signal Integrity, Power Integrity and EMC

9732.26 руб.
New advanced modeling methods for simulating the electromagnetic properties of complex three-dimensional electronic systems Based on the author's extensive research, this book sets forth tested and proven electromagnetic modeling and simulation methods for analyzing signal and power integrity as well as electromagnetic interference in large complex electronic interconnects, multilayered package structures, integrated circuits, and printed circuit boards. Readers will discover the state of the technology in electronic package integration and printed circuit board simulation and modeling. In addition to popular full-wave electromagnetic computational methods, the book presents new, more sophisticated modeling methods, offering readers the most advanced tools for analyzing and designing large complex electronic structures. Electrical Modeling and Design for 3D System Integration begins with a comprehensive review of current modeling and simulation methods for signal integrity, power integrity, and electromagnetic compatibility. Next, the book guides readers through: The macromodeling technique used in the electrical and electromagnetic modeling and simulation of complex interconnects in three-dimensional integrated systems The semi-analytical scattering matrix method based on the N-body scattering theory for modeling of three-dimensional electronic package and multilayered printed circuit boards with multiple vias Two- and three-dimensional integral equation methods for the analysis of power distribution networks in three-dimensional package integrations The physics-based algorithm for extracting the equivalent circuit of a complex power distribution network in three-dimensional integrated systems and printed circuit boards An equivalent circuit model of through-silicon vias Metal-oxide-semiconductor capacitance effects of through-silicon vias Engineers, researchers, and students can turn to this book for the latest techniques and methods for the electrical modeling and design of electronic packaging, three-dimensional electronic integration, integrated circuits, and printed circuit boards.
Frank Gustrau RF and Microwave Engineering. Fundamentals of Wireless Communications Frank Gustrau RF and Microwave Engineering. Fundamentals of Wireless Communications Новинка

Frank Gustrau RF and Microwave Engineering. Fundamentals of Wireless Communications

6666.35 руб.
This book provides a fundamental and practical introduction to radio frequency and microwave engineering and physical aspects of wireless communication In this book, the author addresses a wide range of radio-frequency and microwave topics with emphasis on physical aspects including EM and voltage waves, transmission lines, passive circuits, antennas, radio wave propagation. Up-to-date RF design tools like RF circuit simulation, EM simulation and computerized smith charts, are used in various examples to demonstrate how these methods can be applied effectively in RF engineering practice. Design rules and working examples illustrate the theoretical parts. The examples are close to real world problems, so the reader can directly transfer the methods within the context of their own work. At the end of each chapter a list of problems is given in order to deepen the reader’s understanding of the chapter material and practice the new competences. Solutions are available on the author’s website. Key Features: Presents a wide range of RF topics with emphasis on physical aspects e.g. EM and voltage waves, transmission lines, passive circuits, antennas Uses various examples of modern RF tools that show how the methods can be applied productively in RF engineering practice Incorporates various design examples using circuit and electromagnetic (EM) simulation software Discusses the propagation of waves: their representation, their effects, and their utilization in passive circuits and antenna structures Provides a list of problems at the end of each chapter Includes an accompanying website containing solutions to the problems (http:\\www.fh-dortmund.de\gustrau_rf_textbook) This will be an invaluable textbook for bachelor and masters students on electrical engineering courses (microwave engineering, basic circuit theory and electromagnetic fields, wireless communications). Early-stage RF practitioners, engineers (e.g. application engineer) working in this area will also find this book of interest.
Felix Farret A. Modeling Power Electronics and Interfacing Energy Conversion Systems Felix Farret A. Modeling Power Electronics and Interfacing Energy Conversion Systems Новинка

Felix Farret A. Modeling Power Electronics and Interfacing Energy Conversion Systems

8997.79 руб.
Discusses the application of mathematical and engineering tools for modeling, simulation and control oriented for energy systems, power electronics and renewable energy This book builds on the background knowledge of electrical circuits, control of dc/dc converters and inverters, energy conversion and power electronics. The book shows readers how to apply computational methods for multi-domain simulation of energy systems and power electronics engineering problems. Each chapter has a brief introduction on the theoretical background, a description of the problems to be solved, and objectives to be achieved. Block diagrams, electrical circuits, mathematical analysis or computer code are covered. Each chapter concludes with discussions on what should be learned, suggestions for further studies and even some experimental work. Discusses the mathematical formulation of system equations for energy systems and power electronics aiming state-space and circuit oriented simulations Studies the interactions between MATLAB and Simulink models and functions with real-world implementation using microprocessors and microcontrollers Presents numerical integration techniques, transfer-function modeling, harmonic analysis and power quality performance assessment Examines existing software such as, MATLAB/Simulink, Power Systems Toolbox and PSIM to simulate power electronic circuits including the use of renewable energy sources such as wind and solar sources The simulation files are available for readers who register with the Google Group: [email protected]oups.com. After your registration you will receive information in how to access the simulation files, the Google Group can also be used to communicate with other registered readers of this book.
Steven Voldman H. Electrical Overstress (EOS). Devices, Circuits and Systems Steven Voldman H. Electrical Overstress (EOS). Devices, Circuits and Systems Новинка

Steven Voldman H. Electrical Overstress (EOS). Devices, Circuits and Systems

8848.39 руб.
Electrical Overstress (EOS) continues to impact semiconductor manufacturing, semiconductor components and systems as technologies scale from micro- to nano-electronics. This bookteaches the fundamentals of electrical overstress and how to minimize and mitigate EOS failures. The text provides a clear picture of EOS phenomena, EOS origins, EOS sources, EOS physics, EOS failure mechanisms, and EOS on-chip and system design. It provides an illuminating insight into the sources of EOS in manufacturing, integration of on-chip, and system level EOS protection networks, followed by examples in specific technologies, circuits, and chips. The book is unique in covering the EOS manufacturing issues from on-chip design and electronic design automation to factory-level EOS program management in today’s modern world. Look inside for extensive coverage on: Fundamentals of electrical overstress, from EOS physics, EOS time scales, safe operating area (SOA), to physical models for EOS phenomena EOS sources in today’s semiconductor manufacturing environment, and EOS program management, handling and EOS auditing processing to avoid EOS failures EOS failures in both semiconductor devices, circuits and system Discussion of how to distinguish between EOS events, and electrostatic discharge (ESD) events (e.g. such as human body model (HBM), charged device model (CDM), cable discharge events (CDM), charged board events (CBE), to system level IEC 61000-4-2 test events) EOS protection on-chip design practices and how they differ from ESD protection networks and solutions Discussion of EOS system level concerns in printed circuit boards (PCB), and manufacturing equipment Examples of EOS issues in state-of-the-art digital, analog and power technologies including CMOS, LDMOS, and BCD EOS design rule checking (DRC), LVS, and ERC electronic design automation (EDA) and how it is distinct from ESD EDA systems EOS testing and qualification techniques, and Practical off-chip ESD protection and system level solutions to provide more robust systems Electrical Overstress (EOS): Devices, Circuits and Systems is a continuation of the author’s series of books on ESD protection. It is an essential reference and a useful insight into the issues that confront modern technology as we enter the nano-electronic era.
Paul Rosenberg Audel Electrician's Pocket Manual Paul Rosenberg Audel Electrician's Pocket Manual Новинка

Paul Rosenberg Audel Electrician's Pocket Manual

1910.16 руб.
Your on-the-job reference Now fully updated for the 2002 National Electrical Code, the Electrician's Pocket Manual is packed with charts, conversions, photographs, diagrams, code standards, and other information you need on the job. Find answers quickly and easily * Explains updated maintenance and construction standards * Provides details on motors, controllers, and circuits * Examines electronic components and communications wiring * Features 28 pages of drawings, diagrams, and plans * Offers guidelines for dealing with hazardous location wiring * Covers generators, mechanical power transmission, and electrical power distribution * Includes a chapter on tools and safety
Alexis Vos De Reversible Computing. Fundamentals, Quantum Computing, and Applications Alexis Vos De Reversible Computing. Fundamentals, Quantum Computing, and Applications Новинка

Alexis Vos De Reversible Computing. Fundamentals, Quantum Computing, and Applications

10497.42 руб.
Written by one of the few top internationally recognized experts in the field, this book concentrates on those topics that will remain fundamental, such as low power computing, reversible programming languages, and applications in thermodynamics. It describes reversible computing from various points of view: Boolean algebra, group theory, logic circuits, low-power electronics, communication, software, quantum computing. It is this multidisciplinary approach that makes it unique. Backed by numerous examples, this is useful for all levels of the scientific and academic community, from undergraduates to established academics.
Рудольф Ф. Граф Энциклопедия электронных схем. Том 7. Часть III Рудольф Ф. Граф Энциклопедия электронных схем. Том 7. Часть III Новинка

Рудольф Ф. Граф Энциклопедия электронных схем. Том 7. Часть III

279 руб.
Вниманию читателей предлагается русский перевод американского издания «Encyclopedia of Electronic Circuits. Volume 7». В книге собраны принципиальные схемы и краткие описания различных электронных устройств, взятые составителями из фирменной документации и периодических изданий; представлены схемы различных генераторов, современных источников питания – от миниатюрных преобразователей до высоковольтных. Приводятся как радиочастотные схемы, так и схемы для фотографии и различных действующих моделей. В русском издании исправлены ошибки и опечатки, присутствующие в оригинале. Часть III содержит около 400 схем и статей. Книга рассчитана на самые широкие читательские круги – от радиолюбителей до профессиональных разработчиков радиоэлектронных устройств.
Alexis Vos De Reversible Computing. Fundamentals, Quantum Computing, and Applications Alexis Vos De Reversible Computing. Fundamentals, Quantum Computing, and Applications Новинка

Alexis Vos De Reversible Computing. Fundamentals, Quantum Computing, and Applications

2139.84 руб.
Written by one of the few top internationally recognized experts in the field, this book concentrates on those topics that will remain fundamental, such as low power computing, reversible programming languages, and applications in thermodynamics. It describes reversible computing from various points of view: Boolean algebra, group theory, logic circuits, low-power electronics, communication, software, quantum computing. It is this multidisciplinary approach that makes it unique. Backed by numerous examples, this is useful for all levels of the scientific and academic community, from undergraduates to established academics.
Philippe Basset Electrostatic Kinetic Energy Harvesting Philippe Basset Electrostatic Kinetic Energy Harvesting Новинка

Philippe Basset Electrostatic Kinetic Energy Harvesting

8622.88 руб.
Harvesting kinetic energy is a good opportunity to power wireless sensor in a vibratory environment. Besides classical methods based on electromagnetic and piezoelectric mechanisms, electrostatic transduction has a great perspective in particular when dealing with small devices based on MEMS technology. This book describes in detail the principle of such capacitive Kinetic Energy Harvesters based on a spring-mass system. Specific points related to the design and operation of kinetic energy harvesters (KEHs) with a capacitive interface are presented in detail: advanced studies on their nonlinear features, typical conditioning circuits and practical MEMS fabrication.
Рудольф Ф. Граф Энциклопедия электронных схем. Том 7. Часть I Рудольф Ф. Граф Энциклопедия электронных схем. Том 7. Часть I Новинка

Рудольф Ф. Граф Энциклопедия электронных схем. Том 7. Часть I

239 руб.
Вниманию читателей предлагается русский перевод американского издания «Encyclopedia of Electronic Circuits. Volume 7». В книге собраны принципиальные схемы и краткие описания различных электронных устройств, взятые составителями из фирменной документации и периодики; основное внимание уделено аналоговым и импульсным схемам. В русском издании исправлены ошибки и опечатки, присутствующие в оригинале. Часть I содержит около 300 схем и статей. В приложениях дана информация о наиболее распространенных и популярных в Америке радиоэлементах – как активных, так и пассивных. Книга рассчитана на самые широкие читательские круги – от радиолюбителей до профессиональных разработчиков радиоэлектронных устройств.
Рудольф Ф. Граф Энциклопедия электронных схем. Том 7. Часть II Рудольф Ф. Граф Энциклопедия электронных схем. Том 7. Часть II Новинка

Рудольф Ф. Граф Энциклопедия электронных схем. Том 7. Часть II

279 руб.
Вниманию читателей предлагается русский перевод американского издания «Encyclopedia Of Electronic Circuits. Volume 7». В книге собраны принципиальные схемы и краткие описания различных электронных устройств, взятые составителями из фирменной документации и периодических изданий; представлен широкий спектр схем – от игрушек и измерительных устройств до высококачественных схем и схем на ИК лучах. В русском издании исправлены ошибки и опечатки, присутствующие в оригинале. Часть II содержит около 400 схем и статей. Книга рассчитана на самые широкие читательские круги – от радиолюбителей до профессиональных разработчиков радиоэлектронных устройств.
Edison Silva R.da Advanced Power Electronics Converters. PWM Converters Processing AC Voltages Edison Silva R.da Advanced Power Electronics Converters. PWM Converters Processing AC Voltages Новинка

Edison Silva R.da Advanced Power Electronics Converters. PWM Converters Processing AC Voltages

9672.91 руб.
This book covers power electronics, in depth, by presenting the basic principles and application details, which can be used both as a textbook and reference book. Introduces a new method to present power electronics converters called Power Blocks Geometry (PBG) Applicable for courses focusing on power electronics, power electronics converters, and advanced power converters Offers a comprehensive set of simulation results to help understand the circuits presented throughout the book
Граф Рудольф Ф., Шиитс Вильям 300 новых радиоэлектронных схем Граф Рудольф Ф., Шиитс Вильям 300 новых радиоэлектронных схем Новинка

Граф Рудольф Ф., Шиитс Вильям 300 новых радиоэлектронных схем

241 руб.
Вниманию читателей предлагается русский перевод американского издания "Encyclopedia of Electronic Circuits. Volume 6". В книге собраны принципиальные схемы и краткие описания различных электронных устройств, взятые составителями из фирменной документации и периодических изданий. Основное внимание уделено аналоговым и импульсным схемам. В русском издании исправлены ошибки и опечатки, присутствующие в оригинале. Часть II содержит более 300 схем и статей. В приложениях приведены некоторые справочные данные. Книга рассчитана на самые широкие читательские круги - от радиолюбителей до профессиональных разработчиков радиоэлектронных устройств.
Граф Рудольф Ф., Шиитс Вильям 400 новых радиоэлектронных схем Граф Рудольф Ф., Шиитс Вильям 400 новых радиоэлектронных схем Новинка

Граф Рудольф Ф., Шиитс Вильям 400 новых радиоэлектронных схем

241 руб.
Вниманию читателей предлагается русский перевод американского издания "Encyclopedia of Electronic Circuits. Volume 7". В книге собраны принципиальные схемы и краткие описания различных электронных устройств, взятые составителями из фирменной документации и периодических изданий; представлен широкий спектр схем - от игрушек и измерительных устройств до высокочастотных схем и схем на ИК лучах. В русском издании исправлены ошибки и опечатки, присутствующие в оригинале. Часть II содержит около 400 схем и статей. Книга рассчитана на самые широкие читательские круги - от радиолюбителей до профессиональных разработчиков радиоэлектронных устройств.
Paul Smith W. Transient Electronics. Pulsed Circuit Technology Paul Smith W. Transient Electronics. Pulsed Circuit Technology Новинка

Paul Smith W. Transient Electronics. Pulsed Circuit Technology

16782.41 руб.
Passive Pulse Generators are circuits used to generate very high power electrical pulses. Such pulses find application in a wide range of disciplines, including plasma generation, gas laser physics and radar. * Includes two introductory chapters on techniques used to analyse passive pulse generators * Includes worked examples A valuable reference resource for specialist undergraduates, post graduate students and researchers active in the field og pulsed power and areas where pulsed power is applied, including physicists, engineers and those with an interest in waste and materials processing.
Dina Shmeliova V. Liquid Crystals. Viscous and Elastic Properties in Theory and Applications Dina Shmeliova V. Liquid Crystals. Viscous and Elastic Properties in Theory and Applications Новинка

Dina Shmeliova V. Liquid Crystals. Viscous and Elastic Properties in Theory and Applications

17545.97 руб.
Covering numerous practical applications as yet not covered in any single source of information, this monograph discusses the importance of viscous and elastic properties for applications in both display and non-display technologies. The very well-known authors are major players in this field of research and pay special attention here to the use of liquid crystals in fiber optic devices as applied in telecommunication circuits.
Dietmar Plenz Criticality in Neural Systems Dietmar Plenz Criticality in Neural Systems Новинка

Dietmar Plenz Criticality in Neural Systems

15896.23 руб.
Leading authorities in the field review current experimental and theoretical knowledge on criticality and brain function. The book begins by summarizing experimental evidence for criticality and self-organized criticality in the brain. Subsequently, important breakthroughs in modeling of critical neuronal circuits and how to establish self-organized criticality in the brain are described. A milestone publication, defining upcoming directions of research in this new fi eld and set to become the primary source of information on the brain and criticality.
В. Шиитс, Р. Граф Энциклопедия электронных схем. Том 7. Часть 3 В. Шиитс, Р. Граф Энциклопедия электронных схем. Том 7. Часть 3 Новинка

В. Шиитс, Р. Граф Энциклопедия электронных схем. Том 7. Часть 3

421 руб.
Вниманию читателей предлагается русский перевод американского издания `Encyclopedia of Electronic Circuits. Volume 7`. В книге собраны принципиальные схемы и краткие описания различных электронных устройств, взятые составителями из фирменной документации и периодических изданий; представлены схемы различных генераторов, современных источников питания - от миниатюрных преобразователей до высоковольтных. Приводятся как радиочастотные схемы, так и схемы для фотографии и различных действующих моделей.В русском издании исправлены ошибки и опечатки, присутствующие в оригинале. Часть III содержит около 400 схем и статей.Книга рассчитана на самые широкие читательские круги - от радиолюбителей до профессиональных разработчиков радиоэлектронных устройств.
Cathleen Shamieh Electronics For Dummies Cathleen Shamieh Electronics For Dummies Новинка

Cathleen Shamieh Electronics For Dummies

1913.35 руб.
Explore the basic concepts of electronics, build your electronics workbench, and begin creating fun electronics projects right away! Electronics For Dummies, 3rd Edition is Packed with hundreds of colorful diagrams and photographs, this book provides step-by-step instructions for experiments that show you how electronic components work, advice on choosing and using essential tools, and exciting projects you can build in 30 minutes or less. You’ll get charged up as you transform theory into action in chapter after chapter! • Circuit basics: learn what voltage is, where current flows (and doesn’t flow), and how power is used in a circuit. • Critical components: discover how resistors, capacitors, inductors, diodes, and transistors control and shape electric current. • Versatile chips: find out how to use analog and digital integrated circuits to build complex projects with just a few parts. • Analyze circuits: understand the rules that govern current and voltage and learn how to apply them. • Safety tips: get a thorough grounding in how to protect yourself—and your electronics—from harm. Electronics For Dummies, 3rd Edition helps you explore the basic concepts of electronics with confidence – this book will get you charged up!
Masahiro Fujita Physics and Technology of Crystalline Oxide Semiconductor CAAC-IGZO. Application to LSI Masahiro Fujita Physics and Technology of Crystalline Oxide Semiconductor CAAC-IGZO. Application to LSI Новинка

Masahiro Fujita Physics and Technology of Crystalline Oxide Semiconductor CAAC-IGZO. Application to LSI

8348.99 руб.
This book describes the application of c-axis aligned crystalline In-Ga-Zn oxide (CAAC-IGZO) technology in large-scale integration (LSI) circuits. The applications include Non-volatile Oxide Semiconductor Random Access Memory (NOSRAM), Dynamic Oxide Semiconductor Random Access Memory (DOSRAM), central processing unit (CPU), field-programmable gate array (FPGA), image sensors, and etc. The book also covers the device physics (e.g., off-state characteristics) of the CAAC-IGZO field effect transistors (FETs) and process technology for a hybrid structure of CAAC-IGZO and Si FETs. It explains an extremely low off-state current technology utilized in the LSI circuits, demonstrating reduced power consumption in LSI prototypes fabricated by the hybrid process. A further two books in the series will describe the fundamentals; and the specific application of CAAC-IGZO to LCD and OLED displays. Key features: • Outlines the physics and characteristics of CAAC-IGZO FETs that contribute to favorable operations of LSI devices. • Explains the application of CAAC-IGZO to LSI devices, highlighting attributes including low off-state current, low power consumption, and excellent charge retention. • Describes the NOSRAM, DOSRAM, CPU, FPGA, image sensors, and etc., referring to prototype chips fabricated by a hybrid process of CAAC-IGZO and Si FETs.
Suzanne Dickson L. Neuroendocrinology of Appetite Suzanne Dickson L. Neuroendocrinology of Appetite Новинка

Suzanne Dickson L. Neuroendocrinology of Appetite

8997.79 руб.
This cutting-edge, interdisciplinary volume describes established and state of the art approaches for exploring the pathways that influence and control appetite, including: behavioural, electrophysiological, neuroanatomical, gene knockout and pharmacological techniques. The book presents key peptide and neurotransmitter systems, together with newly emerging concepts of metabolic signalling and hypothalamic inflammation. The impact of early life experience on neuroendocrine appetite circuits is also looked at, including early programming of these circuits by circulating hormones. Finally, new emerging therapeutic approaches to appetite suppression are discussed, including those linked to bariatric (weight loss) surgery. Neuroendocrinology of Appetite is especially focused on established and emerging technologies and approaches for investigating appetite control. It is written so as to provide an overview of sufficient depth for an undergraduate or new scientist in the field to come up to speed in the complementary approaches used by researchers in this field. Taking an interdisciplinary approach, the book aims to appeal to all those with a basic, clinical or therapeutic interest in research into obesity and eating disorders.
Cathleen Shamieh Getting Started with Electronics. Build Electronic Circuits! Cathleen Shamieh Getting Started with Electronics. Build Electronic Circuits! Новинка

Cathleen Shamieh Getting Started with Electronics. Build Electronic Circuits!

636.97 руб.
Fun and engaging electronics projects just for kids! Do you have a cunning kid who's curious about what goes on inside computers, phones, TVs, and other electronic devices? You may just have a budding Edison on your hands—and what better way to encourage their fascination with electronics than a book filled with projects they can complete on their own? In Getting Started with Electronics, your child will follow simple steps to safely create cool electronics projects using basic materials that can easily be found at online retailers or hobby shops. Just imagine your child's delight as they use clips, switches, resistors, capacitors, and more to create circuits that control light and sound! From building a nifty LED flashlight to tuning in to a local radio station using a homemade tuner—and more—your little electronic wiz's world is about to get a whole lot brighter! Features vivid designs and a short page count Focuses on your child experiencing a sense of accomplishment Projects introduce core concepts while keeping tasks simple Teaches electronics in a safe environment Built for the youngest of learners from the makers of the trusted For Dummies brand, you can feel good about giving your child a book that will spark their creativity.
Massimo Ceraolo Fundamentals of Electric Power Engineering. From Electromagnetics to Power Systems Massimo Ceraolo Fundamentals of Electric Power Engineering. From Electromagnetics to Power Systems Новинка

Massimo Ceraolo Fundamentals of Electric Power Engineering. From Electromagnetics to Power Systems

10123.22 руб.
This book serves as a tool for any engineer who wants to learn about circuits, electrical machines and drives, power electronics, and power systems basics From time to time, engineers find they need to brush up on certain fundamentals within electrical engineering. This clear and concise book is the ideal learning tool for them to quickly learn the basics or develop an understanding of newer topics. Fundamentals of Electric Power Engineering: From Electromagnetics to Power Systems helps nonelectrical engineers amass power system information quickly by imparting tools and trade tricks for remembering basic concepts and grasping new developments. Created to provide more in-depth knowledge of fundamentals—rather than a broad range of applications only—this comprehensive and up-to-date book: Covers topics such as circuits, electrical machines and drives, power electronics, and power system basics as well as new generation technologies Allows nonelectrical engineers to build their electrical knowledge quickly Includes exercises with worked solutions to assist readers in grasping concepts found in the book Contains “in-depth” side bars throughout which pique the reader’s curiosity Fundamentals of Electric Power Engineering is an ideal refresher course for those involved in this interdisciplinary branch. For supplementary files for this book, please visit http://booksupport.wiley.com
Oleg Wasynczuk Introduction to Electric Power and Drive Systems Oleg Wasynczuk Introduction to Electric Power and Drive Systems Новинка

Oleg Wasynczuk Introduction to Electric Power and Drive Systems

9372.7 руб.
An introduction to the analysis of electric machines, power electronic circuits, electric drive performance, and power systems This book provides students with the basic physical concepts and analysis tools needed for subsequent coursework in electric power and drive systems with a focus on Tesla’s rotating magnetic field. Organized in a flexible format, it allows instructors to select material as needed to fit their school’s power program. The first chapter covers the fundamental concepts and analytical methods that are common to power and electric drive systems. The subsequent chapters offer introductory analyses specific to electric machines, power electronic circuits, drive system performance and simulation, and power systems. In addition, this book: Provides students with an analytical base on which to build in advanced follow-on courses Examines fundamental power conversions (dc-dc, ac-dc and dc-ac), harmonics, and distortion Describes the dynamic computer simulation of a brushless dc drive to illustrate its performance with both a sinusoidal inverter voltage approximation and more realistic stator six-step drive applied voltages Includes in-chapter short problems, numerous worked examples, and end-of-chapter problems to help readers review and more fully understand each topic
H. Silver Ward Circuitbuilding Do-It-Yourself For Dummies H. Silver Ward Circuitbuilding Do-It-Yourself For Dummies Новинка

H. Silver Ward Circuitbuilding Do-It-Yourself For Dummies

2066.47 руб.
DO-IT-YOURSELF Here's the fun and easy way to start building circuits for your projects Have you ever wanted to build your own electronic device? Put together a thermostat or an in-line fuse, or repair a microphone cable? This is the book for you! Inside you'll find the tools and techniques you need to build circuits, with illustrated, step-by-step directions to help accomplish tasks and complete projects. As you accomplish the tasks throughout the book, you'll construct many projects while learning the key circuitbuilding principles and techniques. Find out about measuring and testing, maintenance and troubleshooting, cables, connectors, how to test your stuff, and more. Stuff You Need to Know * The tools you need and how to use them * How to make sense of schematics and printed circuit boards * Basic techniques for creating any circuit * How to make and repair cables and connectors * Testing and maintenance procedures
Paul Rosenberg Audel Practical Electricity Paul Rosenberg Audel Practical Electricity Новинка

Paul Rosenberg Audel Practical Electricity

3448.44 руб.
Everything begins with the basics To succeed in any of today's electrical specialties, you must first understand the fundamentals. This concise guidebook, fully updated and revised to comply with the National Electrical Code,? provides that solid foundation in electrical theory, circuitry, and common applications. Whether you're pursuing an electrical career, need a refresher course, or simply want to understand the wiring in your home, you'll learn the basics from this book. * Examine the fundamentals of magnetism and electric-ity, conductors, insulators, and circuits * Study common applications including house wiring, lighting, cables, electric heating, and generating * Become familiar with test procedures and electromagnetic induction * Understand inductive and capacitive AC circuits and the principles of alternating current * Explore alarm and intercom wiring, home circuiting, and multiple switching * Find out how generating stations and substations function * Learn from clear, specific text, functional illustrations, and review questions in every chapter
Karl Stephan Analog and Mixed-Signal Electronics Karl Stephan Analog and Mixed-Signal Electronics Новинка

Karl Stephan Analog and Mixed-Signal Electronics

10123.22 руб.
A practical guide to analog and mixed-signal electronics, with an emphasis on design problems and applications This book provides an in-depth coverage of essential analog and mixed-signal topics such as power amplifiers, active filters, noise and dynamic range, analog-to-digital and digital-to-analog conversion techniques, phase-locked loops, and switching power supplies. Readers will learn the basics of linear systems, types of nonlinearities and their effects, op-amp circuits, the high-gain analog filter-amplifier, and signal generation. The author uses system design examples to motivate theoretical explanations and covers system-level topics not found in most textbooks. Provides references for further study and problems at the end of each chapter Includes an appendix describing test equipment useful for analog and mixed-signal work Examines the basics of linear systems, types of nonlinearities and their effects, op-amp circuits, the high-gain analog filter-amplifier, and signal generation Comprehensive and detailed, Analog and Mixed-Signal Electronics is a great introduction to analog and mixed-signal electronics for EE undergraduates, advanced electronics students, and for those involved in computer engineering, biomedical engineering, computer science, and physics.
Richard Li C. RF Circuit Design Richard Li C. RF Circuit Design Новинка

Richard Li C. RF Circuit Design

13487.23 руб.
Summarizes the schemes and technologies in RF circuit design, describes the basic parameters of an RF system and the fundamentals of RF system design, and presents an introduction of the individual RF circuit block design. Forming the backbone of today's mobile and satellite communications networks, radio frequency (RF) components and circuits are incorporated into everything that transmits or receives a radio wave, such as mobile phones, radio, WiFi, and walkie talkies. RF Circuit Design, Second Edition immerses practicing and aspiring industry professionals in the complex world of RF design. Completely restructured and reorganized with new content, end-of-chapter exercises, illustrations, and an appendix, the book presents integral information in three complete sections: Part One explains the different methodologies between RF and digital circuit design and covers voltage and power transportation, impedance matching in narrow-band case and wide-band case, gain of a raw device, measurement, and grounding. It also goes over equipotentiality and current coupling on ground surface, as well as layout and packaging, manufacturability of product design, and radio frequency integrated circuit (RFIC). Part Two includes content on the main parameters and system analysis in RF circuit design, the fundamentals of differential pair and common-mode rejection ratio (CMRR), Balun, and system-on-a-chip (SOC). Part Three covers low-noise amplifier (LNA), power amplifier (PA), voltage-controlled oscillator (VCO), mixers, and tunable filters. RF Circuit Design, Second Edition is an ideal book for engineers and managers who work in RF circuit design and for courses in electrical or electronic engineering.
Jodi Dean Blog Theory. Feedback and Capture in the Circuits of Drive Jodi Dean Blog Theory. Feedback and Capture in the Circuits of Drive Новинка

Jodi Dean Blog Theory. Feedback and Capture in the Circuits of Drive

4977.25 руб.
Blog Theory offers a critical theory of contemporary media. Furthering her account of communicative capitalism, Jodi Dean explores the ways new media practices like blogging and texting capture their users in intensive networks of enjoyment, production, and surveillance. Her wide-ranging and theoretically rich analysis extends from her personal experiences as a blogger, through media histories, to newly emerging social network platforms and applications. Set against the background of the economic crisis wrought by neoliberalism, the book engages with recent work in contemporary media theory as well as with thinkers such as Giorgio Agamben, Jean Baudrillard, Guy Debord, Jacques Lacan, and Slavoj ?i?ek. Through these engagements, Dean defends the provocative thesis that reflexivity in complex networks is best understood via the psychoanalytic notion of the drives. She contends, moreover, that reading networks in terms of the drives enables us to grasp their real, human dimension, that is, the feelings and affects that embed us in the system. In remarkably clear and lucid prose, Dean links seemingly trivial and transitory updates from the new mass culture of the internet to more fundamental changes in subjectivity and politics. Everyday communicative exchangesÑfrom blog posts to text messagesÑhave widespread effects, effects that not only undermine capacities for democracy but also entrap us in circuits of domination.

кешбака
Страницы:


Extensive coverage of mathematical techniques used in engineering with an emphasis on applications in linear circuits and systems Mathematical Foundations for Linear Circuits and Systems in Engineering provides an integrated approach to learning the necessary mathematics specifically used to describe and analyze linear circuits and systems. The chapters develop and examine several mathematical models consisting of one or more equations used in engineering to represent various physical systems. The techniques are discussed in-depth so that the reader has a better understanding of how and why these methods work. Specific topics covered include complex variables, linear equations and matrices, various types of signals, solutions of differential equations, convolution, filter designs, and the widely used Laplace and Fourier transforms. The book also presents a discussion of some mechanical systems that mathematically exhibit the same dynamic properties as electrical circuits. Extensive summaries of important functions and their transforms, set theory, series expansions, various identities, and the Lambert W-function are provided in the appendices. The book has the following features: Compares linear circuits and mechanical systems that are modeled by similar ordinary differential equations, in order to provide an intuitive understanding of different types of linear time-invariant systems. Introduces the theory of generalized functions, which are defined by their behavior under an integral, and describes several properties including derivatives and their Laplace and Fourier transforms. Contains numerous tables and figures that summarize useful mathematical expressions and example results for specific circuits and systems, which reinforce the material and illustrate subtle points. Provides access to a companion website that includes a solutions manual with MATLAB code for the end-of-chapter problems. Mathematical Foundations for Linear Circuits and Systems in Engineering is written for upper undergraduate and first-year graduate students in the fields of electrical and mechanical engineering. This book is also a reference for electrical, mechanical, and computer engineers as well as applied mathematicians. John J. Shynk, PhD, is Professor of Electrical and Computer Engineering at the University of California, Santa Barbara. He was a Member of Technical Staff at Bell Laboratories, and received degrees in systems engineering, electrical engineering, and statistics from Boston University and Stanford University.
Продажа oscillator circuits лучших цены всего мира
Посредством этого сайта магазина - каталога товаров мы очень легко осуществляем продажу oscillator circuits у одного из интернет-магазинов проверенных фирм. Определитесь с вашими предпочтениями один интернет-магазин, с лучшей ценой продукта. Прочитав рекомендации по продаже oscillator circuits легко охарактеризовать производителя как превосходную и доступную фирму.