photo and thermal stabilization for polymer materials



Michael Kohl Polymeric Materials for Solar Thermal Applications Michael Kohl Polymeric Materials for Solar Thermal Applications Новинка

Michael Kohl Polymeric Materials for Solar Thermal Applications

14540.82 руб.
Bridging the gap between basic science and technological applications, this is the first book devoted to polymers for solar thermal applications. Clearly divided into three major parts, the contributions are written by experts on solar thermal applications and polymer scientists alike. The first part explains the fundamentals of solar thermal energy especially for representatives of the plastics industry and researchers. Part two then goes on to provide introductory information on polymeric materials and processing for solar thermal experts. The third part combines both of these fields, discussing the potential of polymeric materials in solar thermal applications, as well as demands on durability, design and building integration. With its emphasis on applications, this monograph is relevant for researchers at universities and developers in commercial companies.
Nicolas Boyard Heat Transfer in Polymer Composite Materials. Forming Processes Nicolas Boyard Heat Transfer in Polymer Composite Materials. Forming Processes Новинка

Nicolas Boyard Heat Transfer in Polymer Composite Materials. Forming Processes

12596.53 руб.
This book addresses general information, good practices and examples about thermo-physical properties, thermo-kinetic and thermo-mechanical couplings, instrumentation in thermal science, thermal optimization and infrared radiation.
Norman Allen S. Photochemistry and Photophysics of Polymeric Materials Norman Allen S. Photochemistry and Photophysics of Polymeric Materials Новинка

Norman Allen S. Photochemistry and Photophysics of Polymeric Materials

13052.81 руб.
Presents the state of the technology, from fundamentals to new materials and applications Today's electronic devices, computers, solar cells, printing, imaging, copying, and recording technology, to name a few, all owe a debt to our growing understanding of the photophysics and photochemistry of polymeric materials. This book draws together, analyzes, and presents our current understanding of polymer photochemistry and photophysics. In addition to exploring materials, mechanisms, processes, and properties, the handbook also highlights the latest applications in the field and points to new developments on the horizon. Photochemistry and Photophysics of Polymer Materials is divided into seventeen chapters, including: Optical and luminescent properties and applications of metal complex-based polymers Photoinitiators for free radical polymerization reactions Photovoltaic polymer materials Photoimaging and lithographic processes in polymers Photostabilization of polymer materials Photodegradation processes in polymeric materials Each chapter, written by one or more leading experts and pioneers in the field, incorporates all the latest findings and developments as well as the authors' own personal insights and perspectives. References guide readers to the literature for further investigation of individual topics. Together, the contributions represent a series of major developments in the polymer world in which light and its energy have been put to valuable use. Not only does this reference capture our current state of knowledge, but it also provides the foundation for new research and the development of new materials and new applications.
James Njuguna Functional and Physical Properties of Polymer Nanocomposites James Njuguna Functional and Physical Properties of Polymer Nanocomposites Новинка

James Njuguna Functional and Physical Properties of Polymer Nanocomposites

8850.7 руб.
The first book to extensively cover nanoparticles, this addresses some of the key issues in nanocomposites. Polymer nanocomposites (polymers reinforced with nanoparticles), are of great interest due to their remarkable mechanical, thermal, chemical properties as well as optical, electronic, and magnetic applications Potential applications include automobile body parts, high-barrier packaging materials, flame-retardants, scratch-resistant composites, and biodegradable nanocomposites Combines basic theory as well as advanced and in-depth knowledge of these properties Broad audience includes researchers in Materials Science, Physics, Polymer Chemistry, and Engineering, and those in industry
Stoyko Fakirov Fundamentals of Polymer Science for Engineers Stoyko Fakirov Fundamentals of Polymer Science for Engineers Новинка

Stoyko Fakirov Fundamentals of Polymer Science for Engineers

9718.01 руб.
Filling a gap in the market, this textbook provides a concise, yet thorough introduction to polymer science for advanced engineering students and practitioners, focusing on the chemical, physical and materials science aspects that are most relevant for engineering applications. After covering polymer synthesis and properties, the major section of the book is devoted to polymeric materials, such as thermoplastics and polymer composites, polymer processing such as injection molding and extrusion, and methods for large-scale polymer characterization. The text concludes with an overview of engineering plastics. The emphasis throughout is on application-relevant topics, and the author focuses on real-life, industry-relevant polymeric materials.
Sabu Thomas Handbook of Multiphase Polymer Systems Sabu Thomas Handbook of Multiphase Polymer Systems Новинка

Sabu Thomas Handbook of Multiphase Polymer Systems

36706.48 руб.
Multiphase polymeric systems include a wide range of materials such as composites, blends, alloys, gels, and interpenetrating polymer networks (IPNs). A one-stop reference on multiphase polymer systems, this book fully covers the preparation, properties, and applications of advanced multiphase systems from macro to nano scales. Edited by well-respected academics in the field of multiphase polymer systems, the book includes contributions from leading international experts. An essential resource for plastic and rubber technologists, filler specialists and researchers in fields studying thermal and electrical properties.
Francoise Laupretre Polymer Materials. Macroscopic Properties and Molecular Interpretations Francoise Laupretre Polymer Materials. Macroscopic Properties and Molecular Interpretations Новинка

Francoise Laupretre Polymer Materials. Macroscopic Properties and Molecular Interpretations

10077.23 руб.
Advanced reviews for Polymer Materials «Molecular modeling of polymers … is a subject that cannot be found in any other [book] in any appreciable detail. … [T]he detailed chapters on specific polymer systems is a great idea.» – Gregory Odegard, Michigan Technological University «The polymer community needs a text book which can connect the macroscopic mechanics with mesoscopic and molecular aspects of polymer.» – Liangbin Li, University of Science and Technology of China This book takes a unique, multi-scale approach to the mechanical properties of polymers, covering both the macroscopic and molecular levels unlike any other book on the market. Based on the authors’ extensive research and writing in the field, Polymer Materials emphasizes the relationships between the chemical structure and the mechanical behavior of polymer materials, providing authoritative guidelines for assessing polymer performance under different conditions and the design of new materials. Key features of this book include: Experimental results on selected examples precede and reinforce the development of theoretical features In-depth discussions of a limited number of polymer systems instead of a brief overview of many Self-contained chapters with a summary of their key points Comprehensive problems and a solutions manual for the different parts of the book Coverage of the basics with an emphasis on polymer dynamics An indispensable resource for polymer scientists and students alike, Polymer Materials is also highly useful for material scientists, engineers, chemists, and physicists in industry and academia.
Qipeng Guo Polymer Morphology. Principles, Characterization, and Processing Qipeng Guo Polymer Morphology. Principles, Characterization, and Processing Новинка

Qipeng Guo Polymer Morphology. Principles, Characterization, and Processing

14036.82 руб.
With a focus on structure-property relationships, this book describes how polymer morphology affects properties and how scientists can modify them. The book covers structure development, theory, simulation, and processing; and discusses a broad range of techniques and methods. • Provides an up-to-date, comprehensive introduction to the principles and practices of polymer morphology • Illustrates major structure types, such as semicrystalline morphology, surface-induced polymer crystallization, phase separation, self-assembly, deformation, and surface topography • Covers a variety of polymers, such as homopolymers, block copolymers, polymer thin films, polymer blends, and polymer nanocomposites • Discusses a broad range of advanced and novel techniques and methods, like x-ray diffraction, thermal analysis, and electron microscopy and their applications in the morphology of polymer materials
Nicolais Luigi Nanocomposites. In Situ Synthesis of Polymer-Embedded Nanostructures Nicolais Luigi Nanocomposites. In Situ Synthesis of Polymer-Embedded Nanostructures Новинка

Nicolais Luigi Nanocomposites. In Situ Synthesis of Polymer-Embedded Nanostructures

7931.81 руб.
A Step-by-step guide to the synthesis and characterization of metal-polymer nanocomposites Polymer nanocomposites, polymers that are reinforced with nano-sized particles, provide enhanced mechanical, thermal, electrical, and barrier properties. Continued research and development of new polymer nanocomposites promises to provide enhanced materials to a broad range of industries, such as plastics, aerospace, automotive, electronics, packaging, and biomedical devices. Structured as a practical laboratory manual, this book enables readers to expertly synthesize and characterize metal-polymer nanocomposites by clearly setting forth the principles and techniques. Nanocomposites: In Situ Synthesis of Polymer-Embedded Nanostructures features contributions from an international team of materials science and nanotechnology experts. Chapters reflect the authors' critical review of the literature as well as their own laboratory experience working with polymer nanocomposites. The book begins with a detailed introduction to the science, properties, and applications of metal-polymer nanocomposites. Next, it covers such topics as: Morphological and topological concepts Phase separation and nanoparticle aggregation Methods for the synthesis of nanocomposites Morphological control Characterization techniques and data analysis methods Toxicity considerations High-resolution images of metal nanoparticles, created by transmission electron microscopy, are provided throughout the book. There are also plenty of process schemes and detailed drawings, helping readers better understand how to synthesize, characterize, and use these composite materials. A bibliography at the end of each chapter provides a gateway to original research papers and reviews in the field. With its focus on the practical steps of synthesis and characterization, Nanocomposites: In Situ Synthesis of Polymer-Embedded Nanostructures is recommended for both students and practitioners in nanotechnology, polymer science, and materials science and engineering.
Brian Grady P. Carbon Nanotube-Polymer Composites. Manufacture, Properties, and Applications Brian Grady P. Carbon Nanotube-Polymer Composites. Manufacture, Properties, and Applications Новинка

Brian Grady P. Carbon Nanotube-Polymer Composites. Manufacture, Properties, and Applications

10382.92 руб.
The accessible compendium of polymers in carbon nanotubes (CNTs) Carbon nanotubes (CNTs)—extremely thin tubes only a few nanometers in diameter but able to attain lengths thousands of times greater—are prime candidates for use in the development of polymer composite materials. Bringing together thousands of disparate research works, Carbon Nanotube-Polymer Composites: Manufacture, Properties, and Applications covers CNT-polymers from synthesis to potential applications, presenting the basic science and engineering of this dynamic and complex area in an accessible, readable way. Designed to be of use to polymer scientists, engineers, chemists, physicists, and materials scientists, the book covers carbon nanotube fundamentals to help polymer experts understand CNTs, and polymer physics to help those in the CNT field, making it an invaluable resource for anyone working with CNT-polymer composites. Detailed chapters describe the mechanical, rheological, electrical, and thermal properties of carbon nanotube-polymer composites. Including a glossary that defines key terms, Carbon Nanotube-Polymer Composites is essential reading for anyone looking to gain a fundamental understanding of CNTs and polymers, as well as potential and current applications, including electronics (shielding and transparent electrodes), flame retardants, and electromechanics (sensors and actuators), and their challenges.
Ashutosh Tiwari Advanced Electrode Materials Ashutosh Tiwari Advanced Electrode Materials Новинка

Ashutosh Tiwari Advanced Electrode Materials

16196.23 руб.
This book covers the recent advances in electrode materials and their novel applications at the cross-section of advanced materials. The book is divided into two sections: State-of-the-art electrode materials; and engineering of applied electrode materials. The chapters deal with electrocatalysis for energy conversion in view of bionanotechnology; surfactant-free materials and polyoxometalates through the concepts of biosensors to renewable energy applications; mesoporous carbon, diamond, conducting polymers and tungsten oxide/conducting polymer-based electrodes and hybrid systems. Numerous approaches are reviewed for lithium batteries, fuel cells, the design and construction of anode for microbial fuel cells including phosphate polyanion electrodes, electrocatalytic materials, fuel cell reactions, conducting polymer based hybrid nanocomposites and advanced nanomaterials.
Igal Szleifer Polymer and Biopolymer Brushes. for Materials Science and Biotechnology Igal Szleifer Polymer and Biopolymer Brushes. for Materials Science and Biotechnology Новинка

Igal Szleifer Polymer and Biopolymer Brushes. for Materials Science and Biotechnology

28432.86 руб.
Serves as a guide for seasoned researchers and students alike, who wish to learn about the cross-fertilization between biology and materials that is driving this emerging area of science This book covers the most relevant topics in basic research and those having potential technological applications for the field of biopolymer brushes. This area has experienced remarkable increase in development of practical applications in nanotechnology and biotechnology over the past decade. In view of the rapidly growing activity and interest in the field, this book covers the introductory features of polymer brushes and presents a unifying and stimulating overview of the theoretical aspects and emerging applications. It immerses readers in the historical perspective and the frontiers of research where our knowledge is increasing steadily—providing them with a feeling of the enormous potential, the multiple applications, and the many up-and-coming trends behind the development of macromolecular interfaces based on the use of polymer brushes. Polymer and Biopolymer Brushes: Fundamentals and Applications in Materials offers chapters on: Functionalization of Surfaces Using Polymer Brushes; Polymer Brushes by ATRP and Surface-Mediated RAFT Polymerization for Biological Functions; Electro-Induced Copper Catalyzed Surface Modification with Monolayer and Polymer Brush; Polymer Brushes on Flat and Curved Substrates; Biomimetic Anchors for Antifouling Polymer Brush Coating; Glycopolymer Brushes Presenting Sugars in Their Natural Form; Smart Surfaces Modified with Phenylboronic Acid-Containing Polymer Brushes; DNA Brushes; Polymer Brushes as Interfacial Materials for Soft Metal Conductors and Electronics; and more. Presents a comprehensive theory/simulation section that will be valuable for all readers Includes chapters not only on the biological applications of polymer brushes but also on biological systems that resemble polymer brushes on flat surfaces Addresses applications in coatings, friction, sensors, microelectromechanical systems, and biomaterials Devotes particular attention to the functional aspects of hybrid nanomaterials employing polymer brushes as functional units Polymer and Biopolymer Brushes: Fundamentals and Applications in Materials is aimed at both graduate students and researchers new to this subject as well as scientists already engaged in the study and development of polymer brushes.
Rick Ubic Microwave Materials and Applications Rick Ubic Microwave Materials and Applications Новинка

Rick Ubic Microwave Materials and Applications

25193.07 руб.
The recent rapid progress in wireless telecommunication, including the Internet of Things, 5th generation wireless systems, satellite broadcasting, and intelligent transport systems has increased the need for low-loss dielectric materials and modern fabrication techniques. These materials have excellent electrical, dielectric, and thermal properties and have enormous potential, especially in wireless communication, flexible electronics, and printed electronics. Microwave Materials and Applications discusses the methods commonly employed for measuring microwave dielectric properties, the various attempts reported to solve problems of materials chemistry and crystal structure, doping, substitution, and composite formation, highlighting the processing techniques, morphology influences, and applications of microwave materials whilst summarizing many of the recent technical research accomplishments in the area of microwave dielectrics and applications Chapters examine: Oxide ceramics for dielectric resonators and substrates HTCC, LTCC and ULTCC tapes for substrates Polymer ceramic composites for printed circuit boards Elastomer-ceramic composites for flexible electronics Dielectric inks EMI shielding materials Microwave ferrites A comprehensive Appendix presents the fundamental properties for more than 4000 low-loss dielectric ceramics, their composition, crystal structure, and their microwave dielectric properties. Microwave Materials and Applications presents a comprehensive view of all aspects of microwave materials and applications, making it useful for scientists, industrialists, engineers, and students working on current and emerging applications of wireless communications and consumer electronics.
Pedro Martins Magnetoelectric Polymer-Based Composites. Fundamentals and Applications Pedro Martins Magnetoelectric Polymer-Based Composites. Fundamentals and Applications Новинка

Pedro Martins Magnetoelectric Polymer-Based Composites. Fundamentals and Applications

11517.51 руб.
The first book on this topic provides a comprehensive and well-structured overview of the fundamentals, synthesis and emerging applications of magnetoelectric polymer materials. Following an introduction to the basic aspects of polymer based magnetoelectric materials and recent developments, subsequent chapters discuss the various types as well as their synthesis and characterization. There then follows a review of the latest applications, such as memories, sensors and actuators. The book concludes with a look at future technological advances. An essential reference for entrants to the field as well as for experienced researchers.
Zhang Litong High Temperature Ceramic Matrix Composites 8 Zhang Litong High Temperature Ceramic Matrix Composites 8 Новинка

Zhang Litong High Temperature Ceramic Matrix Composites 8

11491.67 руб.
This proceedings contains 78 papers from the 8th International Conference on High Temperature Ceramic Matrix Composites, held September 22-26, 2013 in Xi'an, Shaanxi, China. Chapters include: Ceramic Genome, Computational Modeling, and Design Advanced Ceramic Fibers, Interfaces, and Interphases Nanocomposite Materials and Systems Polymer Derived Ceramics and Composites Fiber Reinforced Ceramic MatrixComposites Carbon-Carbon Composites: Materials, Systems, and Applications Ultra High Temperature Ceramics and MAX Phase Materials Thermal and Environmental Barrier Coatings
Wei Wang Microfluidics for Advanced Functional Polymeric Materials Wei Wang Microfluidics for Advanced Functional Polymeric Materials Новинка

Wei Wang Microfluidics for Advanced Functional Polymeric Materials

12236.63 руб.
A comprehensive and systematic treatment of our current understanding of the microfluidic technique and its advantages in the controllable fabrication of advanced functional polymeric materials. Introducing and summarizing recent advances and achievements in the field, the authors cover the design and fabrication of microfluidic devices, the fundamentals and strategies for controllable microfluidic generation of multiphase liquid systems, and the use of these liquid systems with an elaborate combination of their structures and compositions for generating novel polymer materials, such as microcapsules, microfibers, valves, and membranes. Clear diagrams and illustrations throughout the text make the relevant theory and technologies more readily accessible. The result is a specialist reference for materials scientists, organic, polymer and physical chemists, and chemical engineers.
Vijay Thakur Kumar Nanocellulose Polymer Nanocomposites. Fundamentals and Applications Vijay Thakur Kumar Nanocellulose Polymer Nanocomposites. Fundamentals and Applications Новинка

Vijay Thakur Kumar Nanocellulose Polymer Nanocomposites. Fundamentals and Applications

16340.32 руб.
Biorenewable polymers based nanomaterials are rapidly emerging as one of the most fascinating materials for multifunctional applications. Among biorenewable polymers, cellulose based nanomaterials are of great importance due to their inherent advantages such as environmental friendliness, biodegradability, biocompatibility, easy processing and cost effectiveness, to name a few. They may be produced from biological systems such as plants or be chemically synthesised from biological materials. This book summarizes the recent remarkable achievements witnessed in green technology of cellulose based nanomaterials in different fields ranging from biomedical to automotive. This book also discusses the extensive research developments for next generation nanocellulose-based polymer nanocomposites. The book contains seventeen chapters and each chapter addresses some specific issues related to nanocellulose and also demonstrates the real potentialities of these nanomaterials in different domains. The key features of the book are: Synthesis and chemistry of nanocellulose from different biorenewable resources Different characterization of nanocellulosic materials and their respective polymer nanocomposites Physico-chemical, thermal and mechanical investigation of nanocellulose based polymer nanocomposites Provides elementary information and rich understanding of the present state-of- art of nanocellulose-based materials Explores the full range of applications of different nanocellulose-based materials.
Said Ahzi Applied RVE Reconstruction and Homogenization of Heterogeneous Materials Said Ahzi Applied RVE Reconstruction and Homogenization of Heterogeneous Materials Новинка

Said Ahzi Applied RVE Reconstruction and Homogenization of Heterogeneous Materials

10437.13 руб.
Statistical correlation functions are a well-known class of statistical descriptors that can be used to describe the morphology and the microstructure-properties relationship. A comprehensive study has been performed for the use of these correlation functions for the reconstruction and homogenization in nano-composite materials. Correlation functions are measured from different techniques such as microscopy (SEM or TEM), small angle X-ray scattering (SAXS) and can be generated through Monte Carlo simulations. In this book, different experimental techniques such as SAXS and image processing are presented, which are used to measure two-point correlation function correlation for multi-phase polymer composites. Higher order correlation functions must be calculated or measured to increase the precision of the statistical continuum approach. To achieve this aim, a new approximation methodology is utilized to obtain N-point correlation functions for multiphase heterogeneous materials. The two-point functions measured by different techniques have been exploited to reconstruct the microstructure of heterogeneous media. Statistical continuum theory is used to predict the effective thermal conductivity and elastic modulus of polymer composites. N-point probability functions as statistical descriptors of inclusions have been exploited to solve strong contrast homogenization for effective thermal conductivity and elastic modulus properties of heterogeneous materials. Finally, reconstructed microstructure is used to calculate effective properties and damage modeling of heterogeneous materials.
Vijay Thakur Kumar Handbook of Composites from Renewable Materials, Polymeric Composites Vijay Thakur Kumar Handbook of Composites from Renewable Materials, Polymeric Composites Новинка

Vijay Thakur Kumar Handbook of Composites from Renewable Materials, Polymeric Composites

19795.24 руб.
The Handbook of Composites From Renewable Materials comprises a set of 8 individual volumes that brings an interdisciplinary perspective to accomplish a more detailed understanding of the interplay between the synthesis, structure, characterization, processing, applications and performance of these advanced materials. The handbook covers a multitude of natural polymers/ reinforcement/ fillers and biodegradable materials. Together, the 8 volumes total at least 5000 pages and offers a unique publication. This 6th volume Handbook is solely focused on Polymeric Composites. Some of the important topics include but not limited to: Keratin as renewable material for developing polymer composites; natural and synthetic matrices; hydrogels in tissue engineering; smart hydrogels: application in bioethanol production; principle renewable biopolymers; application of hydrogel biocomposites for multiple drug delivery; nontoxic holographic materials; bioplasticizer – epoxidized vegetable oils-based poly (lactic acid) blends and nanocomposites; preparation, characterization and adsorption properties of poly (DMAEA) – cross-linked starch gel copolymer in waste water treatments; study of chitosan crosslinking hydrogels for absorption of antifungal drugs using molecular modelling; pharmaceutical delivery systems composed of chitosan; eco-friendly polymers for food packaging; influence of surface modification on the thermal stability and percentage of crystallinity of natural abaca fiber; influence of the use of natural fibers in composite materials assessed on a life cycle perspective; plant polysaccharides-blended ionotropically-gelled alginate multiple-unit systems for sustained drug release; vegetable oil based polymer composites; applications of chitosan derivatives in wastewater treatment; novel lignin-based materials as a products for various applications; biopolymers from renewable resources and thermoplastic starch matrix as polymer units of multi-component polymer systems for advanced applications; chitosan composites: preparation and applications in removing water pollutants and recent advancements in biopolymer composites for addressing environmental issues.
Hua-Tay Lin Ceramics for Environmental and Energy Applications II Hua-Tay Lin Ceramics for Environmental and Energy Applications II Новинка

Hua-Tay Lin Ceramics for Environmental and Energy Applications II

9573.23 руб.
A collection of papers from the below symposia held during the 10th Pacific Rim Conference on Ceramic and Glass Technology (PacRim10), June 2-7, 2013, in Coronado, California 2012: Solid Oxide Fuel Cells and Hydrogen Technology Direct Thermal to Electrical Energy Conversion Materials and Applications Photovoltaic Materials and Technologies Ceramics for Next Generation Nuclear Energy Advances in Photocatalytic Materials for Energy and Environmental Applications Ceramics Enabling Environmental Protection: Clean Air and Water Advanced Materials and Technologies for Electrochemical Energy Storage Systems Glasses and Ceramics for Nuclear and Hazardous Waste Treatment
D. Bhattacharyya Responsive Membranes and Materials D. Bhattacharyya Responsive Membranes and Materials Новинка

D. Bhattacharyya Responsive Membranes and Materials

12236.63 руб.
The development of new multifunctional membranes and materials which respond to external stimuli, such as pH, temperature, light, biochemicals or magnetic or electrical signals, represents new approaches to separations, reactions, or recognitions. With multiple cooperative functions, responsive membranes and materials have applications which range from biopharmaceutical, to drug delivery systems to water treatment. This book covers recent advances in the generation and application of responsive materials and includes: Development and design of responsive membranes and materials Carbon nanotube membranes Tunable separations, reactions and nanoparticle synthesis Responsive membranes for water treatment Pore-filled membranes for drug release Biologically-inspired responsive materials and hydrogels Biomimetic polymer gels Responsive Membranes and Materials provides a cutting-edge resource for researchers and scientists in membrane science and technology, as well as specialists in separations, biomaterials, bionanotechnology, drug delivery, polymers, and functional materials.
Andreas Ochsner Cellular and Porous Materials. Thermal Properties Simulation and Prediction Andreas Ochsner Cellular and Porous Materials. Thermal Properties Simulation and Prediction Новинка

Andreas Ochsner Cellular and Porous Materials. Thermal Properties Simulation and Prediction

20730.16 руб.
Providing the reader with a solid understanding of the fundamentals as well as an awareness of recent advances in properties and applications of cellular and porous materials, this handbook and ready reference covers all important analytical and numerical methods for characterizing and predicting thermal properties. In so doing it directly addresses the special characteristics of foam-like and hole-riddled materials, combining theoretical and experimental aspects for characterization purposes.
Vikas Mittal Polymers for Energy Storage and Conversion Vikas Mittal Polymers for Energy Storage and Conversion Новинка

Vikas Mittal Polymers for Energy Storage and Conversion

13868.62 руб.
One of the first comprehensive books to focus on the role of polymers in the burgeoning energy materials market Polymers are increasingly finding applications in the areas of energy storage and conversion. A number of recent advances in the control of the polymer molecular structure which allows the polymer properties to be more finely tuned have led to these advances and new applications. Polymers for Energy Storage and Conversion assimilates these advances in the form of a comprehensive text that includes the synthesis and properties of a large number of polymer systems for applications in areas such as lithium batteries, photovoltaics, and solar cells. Polymers for Energy Storage and Conversion: Introduces the structure and properties of polymer hydrogel with respect to its applications for low to intermediate temperature polymer electrolyte-based fuel cells Describes PVAc-based polymer blend electrolytes for lithium batteries Reviews lithium polymer batteries based on ionic liquids Proposes the concept of the solar cell with organic multiple quantum dots (MQDs) Discusses solvent effects in polymer-based organic photovoltaic devices Provides an overview of the properties of the polymers that factor into their use for solar power, whether for niche applications or for large-scale harvesting Reviews the use of macroporous organic polymers as promising materials for energy gas storage Readership Materials scientists working with energy materials, polymer engineers, chemists, and other scientists and engineers working with photovoltaics and batteries as well as in the solar and renewable energy sectors.
Meier Michael A.R. Green Polymerization Methods. Renewable Starting Materials, Catalysis and Waste Reduction Meier Michael A.R. Green Polymerization Methods. Renewable Starting Materials, Catalysis and Waste Reduction Новинка

Meier Michael A.R. Green Polymerization Methods. Renewable Starting Materials, Catalysis and Waste Reduction

16612.67 руб.
Designing polymers and developing polymerization processes that are safe, prevent pollution, and are more efficient in the use of materials and engergy is an important topic in modern chemistry. Today, green polymer research can be seen increasingly in academia nd industry. It tackles all aspects of polymers and polymerization – everything from chemical feedstocks, synthetic pathways, and reaction media to the nature of the final polymer as related to its inherent nontoxicity or degradability. This book summarizes and evaluates the latest developments in green polymerization methods. Specifically, new catalytic methods and processes which incorporate renewable resources will be discussed by leading experts in the field of polymer chemistry. This book is a must-have for Polymer Chemists, Chemists Working with/on Organometallics, Biochemists, Physical Chemists, Chemical Engineers, Biotechnologists, Materials Scientists, and Catalytic Chemists.
Andreas Winter Terpyridine-based Materials. For Catalytic, Optoelectronic and Life Science Applications Andreas Winter Terpyridine-based Materials. For Catalytic, Optoelectronic and Life Science Applications Новинка

Andreas Winter Terpyridine-based Materials. For Catalytic, Optoelectronic and Life Science Applications

15619.84 руб.
In recent years, the utilization of terpyridines both in macromolecular structure assembly and device chemistry has exploded, enabling, for example, supramolecular polymer architectures with switchable chemical and physical properties as well as novel functional materials for optoelectronic applications such as light-emitting diodes and solar cells. Further applications include the usage of terpyridines and their metal complexes as catalysts for asymmetric organic reactions and, in a biological context, as anti-tumor agents or biolabels. This book covers terpyridine-based materials topics ranging from syntheses, chemistry, and multinuclear metal complexes, right up to functionalized polymers, 3D-architectures, and surfaces. Aimed at materials scientists, (in)organic chemists, polymer chemists, complex chemists, physical chemists, biochemists, and libraries.
Thomas Keller High Temperature Performance of Polymer Composites Thomas Keller High Temperature Performance of Polymer Composites Новинка

Thomas Keller High Temperature Performance of Polymer Composites

12236.63 руб.
The authors explain the changes in the thermophysical and thermomechanical properties of polymer composites under elevated temperatures and fire conditions. Using microscale physical and chemical concepts they allow researchers to find reliable solutions to their engineering needs on the macroscale. In a unique combination of experimental results and quantitative models, a framework is developed to realistically predict the behavior of a variety of polymer composite materials over a wide range of thermal and mechanical loads. In addition, the authors treat extreme fire scenarios up to more than 1000?C for two hours, presenting heat-protection methods to improve the fire resistance of composite materials and full-scale structural members, and discuss their performance after fire exposure. Thanks to the microscopic approach, the developed models are valid for a variety of polymer composites and structural members, making this work applicable to a wide audience, including materials scientists, polymer chemists, engineering scientists in industry, civil engineers, mechanical engineers, and those working in the industry of civil infrastructure.
Utracki Leszek A. Polymer Physics. From Suspensions to Nanocomposites and Beyond Utracki Leszek A. Polymer Physics. From Suspensions to Nanocomposites and Beyond Новинка

Utracki Leszek A. Polymer Physics. From Suspensions to Nanocomposites and Beyond

15348.18 руб.
Providing a comprehensive review of the state-of-the-art advanced research in the field, Polymer Physics explores the interrelationships among polymer structure, morphology, and physical and mechanical behavior. Featuring contributions from renowned experts, the book covers the basics of important areas in polymer physics while projecting into the future, making it a valuable resource for students and chemists, chemical engineers, materials scientists, and polymer scientists as well as professionals in related industries.
Dongming Zhu Processing and Properties of Advanced Ceramics and Composites VII Dongming Zhu Processing and Properties of Advanced Ceramics and Composites VII Новинка

Dongming Zhu Processing and Properties of Advanced Ceramics and Composites VII

12596.53 руб.
This volume contains 40 papers from the following 10 Materials Science and Technology (MS&T'14) symposia: Rustum Roy Memorial Symposium: Processing and Performance of Materials Using Microwaves, Electric and Magnetic Fields, Ultrasound, Lasers, and Mechanical Work Advances in Dielectric Materials and Electronic Devices Innovative Processing and Synthesis of Ceramics, Glasses and Composites Advances in Ceramic Matrix Composites Sintering and Related Powder Processing Science and Technology Advanced Materials for Harsh Environments Thermal Protection Materials and Systems Advanced Solution Based Processing for Ceramic Materials Controlled Synthesis, Processing, and Applications of Structure and Functional Nanomaterials Surface Protection for Enhanced Materials Performance
Finizia Auriemma Crystals and Crystallinity in Polymers. Diffraction Analysis of Ordered and Disordered Crystals Finizia Auriemma Crystals and Crystallinity in Polymers. Diffraction Analysis of Ordered and Disordered Crystals Новинка

Finizia Auriemma Crystals and Crystallinity in Polymers. Diffraction Analysis of Ordered and Disordered Crystals

11517.51 руб.
Provides the tools needed to master and apply the fundamentals of polymer crystallography Using core concepts in physics, chemistry, polymer science and engineering, this book sheds new light on the complex field of polymer crystallography, enabling readers to evaluate polymer crystallization data and determine the best methods to use for their investigations. The authors set forth a variety of tested and proven methods for analyzing ordered and disordered structures in polymer crystals, including X-ray diffraction, electron diffraction, and microscopy. In addition to the basics, the book explores several advanced and emerging topics in the field such as symmetry breaking, frustration, and the principle of density-driven phase formation. Crystals and Crystallinity in Polymers introduces two new concepts in crystallinity and crystals in synthetic polymers. First, crystallinity in polymeric materials is compatible with the absence of true three-dimensional long-range order. Second, the disorder may be described as a structural feature, using the methods of X-ray scattering and electron diffraction analysis. The book begins by introducing the basic principles and methods for building structural models for the conformation of polymer crystal chains. Next, it covers: Packing of macromolecules in polymer crystals Methods for extracting structural parameters from diffraction data Defects and disorder in polymer crystals Analytical methods for diffuse scattering from disordered polymer structures Crystal habit Influence of crystal defects and structural disorder on the physical and mechanical properties of polymeric materials Crystals and Crystallinity in Polymers examines all the possible types of structural disorder generally present in polymer crystals and describes the influence of each kind of disorder on X-ray and electron diffraction patterns. Its comprehensive, expert coverage makes it possible for readers to learn and apply the fundamentals of polymer crystallography to solve a broad range of problems.
Hongbo Zeng Polymer Adhesion, Friction, and Lubrication Hongbo Zeng Polymer Adhesion, Friction, and Lubrication Новинка

Hongbo Zeng Polymer Adhesion, Friction, and Lubrication

15348.18 руб.
Specifically dedicated to polymer and biopolymer systems, Polymer Adhesion, Friction, and Lubrication guides readers to the scratch, wear, and lubrication properties of polymers and the engineering applications, from biomedical research to automotive engineering. Author Hongbo Zeng details different experimental and theoretical methods used to probe static and dynamic properties of polymer materials and biomacromolecular systems. Topics include the use of atomic force microscopy (AFM) to analyze nanotribology, polymer thin films and brushes, nanoparticles, rubber and tire technology, synovial joint lubrication, adhesion in paper products, bioMEMS, and electrorheological fluids.
Piorkowska Ewa Handbook of Polymer Crystallization Piorkowska Ewa Handbook of Polymer Crystallization Новинка

Piorkowska Ewa Handbook of Polymer Crystallization

15348.18 руб.
Polymeric crystals are more complex in nature than other materials' crystal structures due to significant structural disorder present. The only comprehensive reference on polymer crystallization, Handbook of Polymer Crystallization provides readers with a broad, in-depth guide on the subject, covering the numerous problems encountered during crystallization as well as solutions to resolve those problems to achieve the desired result. Edited by leading authorities in the field, topics explored include neat polymers, heterogeneous systems, polymer blends, polymer composites orientation induced crystallization, crystallization in nanocomposites, and crystallization in complex thermal processing conditions.
Vijay Thakur Kumar Handbook of Composites from Renewable Materials, Functionalization Vijay Thakur Kumar Handbook of Composites from Renewable Materials, Functionalization Новинка

Vijay Thakur Kumar Handbook of Composites from Renewable Materials, Functionalization

19795.24 руб.
The Handbook of Composites From Renewable Materials comprises a set of 8 individual volumes that brings an interdisciplinary perspective to accomplish a more detailed understanding of the interplay between the synthesis, structure, characterization, processing, applications and performance of these advanced materials. The handbook covers a multitude of natural polymers/ reinforcement/ fillers and biodegradable materials. Together, the 8 volumes total at least 5000 pages and offers a unique publication. This 4th volume of the Handbook is solely focused on the Functionalization of renewable materials. Some of the important topics include but not limited to: Chitosan-based bio sorbents: oil spill clean-up by textiles; pyridine and bipyridine end-functionalized polylactide; functional separation membranes from chitin and chitosan derivatives; acrylated epoxidized flaxseed oil bio-resin and its biocomposites; encapsulation of inorganic renewable nanofiller; chitosan coating on textile fibers for functional properties; surface functionalization of cellulose whiskers for nonpolar composites; impact of chemical treatment and the manufacturing process on mechanical, thermal and rheological properties of natural fibers based composites; bio-polymers modification; review on fibers from natural resources; strategies to improve the functionality of starch based films; the effect of gamma-radiation on biodegradability of natural fibers; surface functionalization through vapor-phase assisted surface polymerization (VASP) on natural materials from agricultural by-products; okra bast fiber as potential reinforcement element of biocomposites; silane coupling agent used in natural fiber/plastic composites; composites of olefin polymer /natural fibers: the surface modifications on natural fibers; surface functionalization of biomaterials; thermal and mechanical behaviors of bio-renewable fibres based polymer composites; natural and artificial diversification of starch; role of radiation and surface modification on bio-fiber for reinforced polymer composites.
Atul Tiwari Reactions and Mechanisms in Thermal Analysis of Advanced Materials Atul Tiwari Reactions and Mechanisms in Thermal Analysis of Advanced Materials Новинка

Atul Tiwari Reactions and Mechanisms in Thermal Analysis of Advanced Materials

16196.23 руб.
Strong bonds form stronger materials. For this reason, the investigation on thermal degradation of materials is a significantly important area in research and development activities. The analysis of thermal stability can be used to assess the behavior of materials in the aggressive environmental conditions, which in turn provides valuable information about the service life span of the materiel. Unlike other books published so far that have focused on either the fundamentals of thermal analysis or the degradation pattern of the materials, this book is specifically on the mechanism of degradation of materials. The mechanism of rapturing of chemical bonds as a result of exposure to high-temperature environment is difficult to study and resulting mechanistic pathway hard to establish. Limited information is available on this subject in the published literatures and difficult to excavate. Chapters in this book are contributed by the experts working on thermal degradation and analysis of the wide variety of advanced and traditional materials. Each chapter discusses the material, its possible application, behavior of chemical entities when exposed to high-temperature environment and mode and the mechanistic route of its decomposition. Such information is crucial while selecting the chemical ingredients during the synthesis or development of new materials technology.
Long Yu Biodegradable Polymer Blends and Composites from Renewable Resources Long Yu Biodegradable Polymer Blends and Composites from Renewable Resources Новинка

Long Yu Biodegradable Polymer Blends and Composites from Renewable Resources

12385.34 руб.
Biodegradable Polymer Blends and Composites from Renewable Resources provides a comprehensive, current overview of biopolymeric blends and composites and their applications in various industries. The book is organized according to the type of blend or composite. For each topic, the relationship between the structure of the blends/composites and their respective properties is explored, with particular focus on interface, compatibility, mechanical, and thermal properties. Real-life applications and potential markets are discussed. This is a premier reference for graduate students and researchers in polymer science, chemical and bio engineering, and materials science.
Ashutosh Tiwari Advanced Carbon Materials and Technology Ashutosh Tiwari Advanced Carbon Materials and Technology Новинка

Ashutosh Tiwari Advanced Carbon Materials and Technology

14895.94 руб.
The expansion of carbon materials is multidisciplinary and is related to physics, chemistry, biology, applied sciences and engineering. The research on carbon materials has mostly focused on aspects of fundamental physics as they unique electrical, thermal and mechanical properties applicable for the range of applications. The electrons in graphene and other derived carbon materials behave as dirac fermions due to their interaction with the ions of the lattice. This direction has led to the discovery of new phenomena such as Klein tunneling in carbon based solid state systems and the so-called half-integer quantum Hall effect. Advanced Carbon Materials and Technology presents cutting-edge chapters on the processing, properties and technological developments of graphene, carbon nanotubes, carbon fibers, carbon particles and other carbon based structures including multifunctional graphene sheets, graphene quantum dots, bulky balls, carbon balls, and their polymer composites. This book brings together respected international scholars writing on the innovative methodologies and strategies adopted in carbon materials research area including Synthesis, characterization and functionalization of carbon nanotubes and graphene Surface modification of graphene Carbon based nanostructured materials Graphene and carbon nanotube based electrochemical (bio)sensors for environmental monitoring Carbon catalysts for hydrogen storage materials Optical carbon nanoobjects Graphene and carbon nanotube based biosensors Carbon doped cryogel films Bioimpact of carbon nanomaterials Photocatalytic nature of carbon nanotube based composites Engineering behavior of ash fills Fly ash syntactic foams microstructure
Jasim Ahmed Glass Transition and Phase Transitions in Food and Biological Materials Jasim Ahmed Glass Transition and Phase Transitions in Food and Biological Materials Новинка

Jasim Ahmed Glass Transition and Phase Transitions in Food and Biological Materials

14396.04 руб.
Glass and State Transitions in Food and Biological Materials describes how glass transition has been applied to food micro-structure, food processing, product development, storage studies, packaging development and other areas. This book has been structured so that readers can initially grasp the basic principles and instrumentation, before moving through the various applications. In summary, the book will provide the “missing link” between food science and material science/polymer engineering. This will allow food scientists to better understand the concept and applications of thermal properties.
Dongming Zhu Processing, Properties, and Design of Advanced Ceramics and Composites Dongming Zhu Processing, Properties, and Design of Advanced Ceramics and Composites Новинка

Dongming Zhu Processing, Properties, and Design of Advanced Ceramics and Composites

12596.53 руб.
This proceedings volume contains a collection of 34 papers from the following symposia held during the 2015 Materials Science and Technology (MS&T '15) meeting: Innovative Processing and Synthesis of Ceramics, Glasses and Composites Advances in Ceramic Matrix Composites Advanced Materials for Harsh Environments Advances in Dielectric Materials and Electronic Devices Controlled Synthesis, Processing, and Applications of Structure and Functional Nanomaterials Processing and Performance of Materials Using Microwaves, Electric and Magnetic Fields, Ultrasound, Lasers, and Mechanical Work, Rustum Roy Memorial Symposium Sintering and Related Powder Processing Science and Technologies Surface Protection for Enhanced Materials Performance: Science, Technology, and Application Thermal Protection Materials and Systems Ceramic Optical Materials Alumina at the Forefront of Technology
Yasuyuki Tezuka Complex Macromolecular Architectures. Synthesis, Characterization, and Self-Assembly Yasuyuki Tezuka Complex Macromolecular Architectures. Synthesis, Characterization, and Self-Assembly Новинка

Yasuyuki Tezuka Complex Macromolecular Architectures. Synthesis, Characterization, and Self-Assembly

27928.86 руб.
The field of CMA (complex macromolecular architecture) stands at the cutting edge of materials science, and has been a locus of intense research activity in recent years. This book gives an extensive description of the synthesis, characterization, and self-assembly of recently-developed advanced architectural materials with a number of potential applications. The architectural polymers, including bio-conjugated hybrid polymers with poly(amino acid)s and gluco-polymers, star-branched and dendrimer-like hyperbranched polymers, cyclic polymers, dendrigraft polymers, rod-coil and helix-coil block copolymers, are introduced chapter by chapter in the book. In particular, the book also emphasizes the topic of synthetic breakthroughs by living/controlled polymerization since 2000. Furthermore, renowned authors contribute on special topics such as helical polyisocyanates, metallopolymers, stereospecific polymers, hydrogen-bonded supramolecular polymers, conjugated polymers, and polyrotaxanes, which have attracted considerable interest as novel polymer materials with potential future applications. In addition, recent advances in reactive blending achieved with well-defined end-functionalized polymers are discussed from an industrial point of view. Topics on polymer-based nanotechnologies, including self-assembled architectures and suprastructures, nano-structured materials and devices, nanofabrication, surface nanostructures, and their AFM imaging analysis of hetero-phased polymers are also included. Provides comprehensive coverage of recently developed advanced architectural materials Covers hot new areas such as o click chemistry o chain walking o polyhomologation o ADMET Edited by highly regarded scientists in the field Contains contributions from 26 leading experts from Europe, North America, and Asia Researchers in academia and industry specializing in polymer chemistry will find this book to be an ideal survey of the most recent advances in the area. The book is also suitable as supplementary reading for students enrolled in Polymer Synthetic Chemistry, Polymer Synthesis, Polymer Design, Advanced Polymer Chemistry, Soft Matter Science, and Materials Science courses. Color versions of selected figures can be found at www.wiley.com/go/hadjichristidis
Rosen Stephen L. Fundamental Principles of Polymeric Materials Rosen Stephen L. Fundamental Principles of Polymeric Materials Новинка

Rosen Stephen L. Fundamental Principles of Polymeric Materials

7635.15 руб.
New edition brings classic text up to date with the latest science, techniques, and applications With its balanced presentation of polymer chemistry, physics, and engineering applications, the Third Edition of this classic text continues to instill readers with a solid understanding of the core concepts underlying polymeric materials. Both students and instructors have praised the text for its clear explanations and logical organization. It begins with molecular-level considerations and then progressively builds the reader's knowledge with discussions of bulk properties, mechanical behavior, and processing methods. Following a brief introduction, Fundamental Principles of Polymeric Materials is divided into four parts: Part 1: Polymer Fundamentals Part 2: Polymer Synthesis Part 3: Polymer Properties Part 4: Polymer Processing and Performance Thoroughly Updated and Revised Readers familiar with the previous edition of this text will find that the organization and style have been updated with new material to help them grasp key concepts and discover the latest science, techniques, and applications. For example, there are new introductory sections on organic functional groups focusing on the structures found in condensation polymerizations. The text also features new techniques for polymer analysis, processing, and microencapsulation as well as emerging techniques such as atom transfer radical polymerization. At the end of each chapter are problems—including many that are new to this edition—to test the reader's grasp of core concepts as they advance through the text. There are also references leading to the primary literature for further investigation of individual topics. A classic in its field, this text enables students in chemistry, chemical engineering, materials science, and mechanical engineering to fully grasp and apply the fundamentals of polymeric materials, preparing them for more advanced coursework.
Figueiredo José Luis Carbon Materials for Catalysis Figueiredo José Luis Carbon Materials for Catalysis Новинка

Figueiredo José Luis Carbon Materials for Catalysis

15129.4 руб.
This is the first comprehensive book covering all aspects of the use of carbonaceous materials in heterogeneous catalysis. It covers the preparation and characterization of carbon supports and carbon-supported catalysts; carbon surface chemistry in catalysis; the description of catalytic, photo-catalytic, or electro-catalytic reactions, including the development of new carbon materials such as carbon xerogels, aerogels, or carbon nanotubes; and new carbon-based materials in catalytic or adsorption processes. This is a premier reference for carbon, inorganic, and physical chemists, materials scientists and engineers, chemical engineers, and others.
Hongting Pu Polymers for PEM Fuel Cells Hongting Pu Polymers for PEM Fuel Cells Новинка

Hongting Pu Polymers for PEM Fuel Cells

11156.93 руб.
Including chemical, synthetic, and cross-disciplinary approaches; this book includes the necessary techniques and technologies to help readers better understand polymers for polymer electrolyte membrane (PEM) fuel cells. The methods in the book are essential to researchers and scientists in the field and will lead to further development in polymer and fuel cell technologies. • Provides complete, essential, and comprehensive overview of polymer applications for PEM fuel cells • Emphasizes state-of-the-art developments and methods, like PEMs for novel fuel cells and polymers for fuel cell catalysts • Includes detailed chapters on major topics, like PEM for direct liquid fuel cells and fluoropolymers and non-fluorinated polymers for PEM • Has relevance to a range of industries – like polymer engineering, materials, and green technology – involved with fuel cell technologies and R&D
Wenping Hu Organic Optoelectronics Wenping Hu Organic Optoelectronics Новинка

Wenping Hu Organic Optoelectronics

14180.23 руб.
Written by internationally recognized experts in the field with academic as well as industrial experience, this book concisely yet systematically covers all aspects of the topic. The monograph focuses on the optoelectronic behavior of organic solids and their application in new optoelectronic devices. It covers organic field-effect and organic electroluminescent materials and devices, organic photonics, materials and devices, as well as organic solids in photo absorption and energy conversion. Much emphasis is laid on the preparation of functional materials and the fabrication of devices, from materials synthesis and purification, to physicochemical properties and the basic processes and working principles of the devices. The only book to cover fundamentals, applications, and the latest research results, this is a handy reference for both researchers and those new to the field. From the contents: * Electronic process in organic solids * Organic/polymeric semiconductors for field-effect transistors * Organic/polymeric field-effect transistors * Organic circuits and organic single molecular transistors * Polymer light-emitting Diodes (PLEDs): devices and materials * Organic solids for photonics * Organic photonic devices * Organic solar cells based on small molecules * Polymer solar cells * Dye-sensitized solar cells (DSSCs) * Organic thermoelectric power devices
Carlos Aleman Peptide Materials. From Nanostuctures to Applications Carlos Aleman Peptide Materials. From Nanostuctures to Applications Новинка

Carlos Aleman Peptide Materials. From Nanostuctures to Applications

14540.82 руб.
Peptides are the building blocks of the natural world; with varied sequences and structures, they enrich materials producing more complex shapes, scaffolds and chemical properties with tailorable functionality. Essentially based on self-assembly and self-organization and mimicking the strategies that occur in Nature, peptide materials have been developed to accomplish certain functions such as the creation of specific secondary structures (a- or 310-helices, b-turns, b-sheets, coiled coils) or biocompatible surfaces with predetermined properties. They also play a key role in the generation of hybrid materials e.g. as peptide-inorganic biomineralized systems and peptide/polymer conjugates, producing smart materials for imaging, bioelectronics, biosensing and molecular recognition applications. Organized into four sections, the book covers the fundamentals of peptide materials, peptide nanostructures, peptide conjugates and hybrid nanomaterials, and applications with chapters including: Properties of peptide scaffolds in solution and on solid substrates Nanostructures, peptide assembly, and peptide nanostructure design Soft spherical structures obtained from amphiphilic peptides and peptide-polymer hybrids Functionalization of carbon nanotubes with peptides Adsorption of peptides on metal and oxide surfaces Peptide applications including tissue engineering, molecular switches, peptide drugs and drug delivery Peptide Materials: From Nanostructures to Applications gives a truly interdisciplinary review, and should appeal to graduate students and researchers in the fields of materials science, nanotechnology, biomedicine and engineering as well as researchers in biomaterials and bio-inspired smart materials.
Wiley Processing and Finishing of Polymeric Materials, 2 Volume Set Wiley Processing and Finishing of Polymeric Materials, 2 Volume Set Новинка

Wiley Processing and Finishing of Polymeric Materials, 2 Volume Set

40419.23 руб.
An authoritative reference on the processing and finishing of polymeric materials for scientists and practitioners Owing to their versatility and wide range of applications, polymeric materials are of great commercial importance. Manufacturing processes of commercial products are designed to meet the requirements of the final product and are influenced by the physical and chemical properties of the polymeric material used. Based on Wiley's renowned Encyclopedia of Polymer Science and Technology, Processing and Finishing of Polymeric Materials provides comprehensive, up-to-date details on the latest manufacturing technologies, including blending, compounding, extrusion,molding, and coating. Written by prominent scholars from industry, academia, and research institutions from around the globe, this reference features more than forty selected reprints from the Encyclopedia as well as new contributions, providing unparalleled coverage of such topics as: Additives Antistatic agents Bleaching Blowing agents Calendaring Casting Coloring processes Dielectric heating Electrospinning Embedding Processing and Finishing of Polymeric Materials is an ideal resource for polymer and materials scientists, chemists, chemical engineers, materials scientists, process engineers, and consultants, and serves as a valuable addition to libraries of chemistry, chemical engineering, and materials science in industry, academia, and government.
Christian Stevens Bio-Based Plastics. Materials and Applications Christian Stevens Bio-Based Plastics. Materials and Applications Новинка

Christian Stevens Bio-Based Plastics. Materials and Applications

13820.33 руб.
The field of bio-based plastics has developed significantly in the last 10 years and there is increasing pressure on industries to shift existing materials production from petrochemicals to renewables. Bio-based Plastics presents an up-to-date overview of the basic and applied aspects of bioplastics, focusing primarily on thermoplastic polymers for material use. Emphasizing materials currently in use or with significant potential for future applications, this book looks at the most important biopolymer classes such as polysaccharides, lignin, proteins and polyhydroxyalkanoates as raw materials for bio-based plastics, as well as materials derived from bio-based monomers like lipids, poly(lactic acid), polyesters, polyamides and polyolefines. Detailed consideration is also given to the market and availability of renewable raw materials, the importance of bio-based content and the aspect of biodegradability. Topics covered include: Starch Cellulose and cellulose acetate Materials based on chitin and chitosan Lignin matrix composites from natural resources Polyhydroxyalkanoates Poly(lactic acid) Polyesters, Polyamides and Polyolefins from biomass derived monomers Protein-based plastics Bio-based Plastics is a valuable resource for academic and industrial researchers who are interested in new materials, renewable resources, sustainability and polymerization technology. It will also prove useful for advanced students interested in the development of bio-based products and materials, green and sustainable chemistry, polymer chemistry and materials science. For more information on the Wiley Series in Renewable Resources, visit www.wiley.com/go/rrs
Yanchun Zhou Developments in Strategic Materials and Computational Design IV Yanchun Zhou Developments in Strategic Materials and Computational Design IV Новинка

Yanchun Zhou Developments in Strategic Materials and Computational Design IV

6186.61 руб.
Ceramic Engineering and Science Proceedings Volume 34, Issue 10 – Developments in Strategic Materials and Computational Design IV A collection of 25 papers from The American Ceramic Society’s 37th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 27-February 1, 2013. This issue includes papers presented in the Geopolymers and Chemically Bonded Ceramics (Focused Session 1); Thermal Management Materials and Technologies (Focused Sessoin 2); and Materials for Extreme Environments: Ultrahigh Temperature Ceramics and Nano-laminated Ternary Carbides and Nitrides (MAX Phases) (Symposium 12).
Witold Brostow Materials. Introduction and Applications Witold Brostow Materials. Introduction and Applications Новинка

Witold Brostow Materials. Introduction and Applications

8997.52 руб.
Presents a fully interdisciplinary approach with a stronger emphasis on polymers and composites than traditional materials books Materials science and engineering is an interdisciplinary field involving the properties of matter and its applications to various areas of science and engineering. Polymer materials are often mixed with inorganic materials to enhance their mechanical, electrical, thermal, and physical properties. Materials: Introduction and Applications addresses a gap in the existing textbooks on materials science. This book focuses on three Units. The first, Foundations, includes basic materials topics from Intermolecular Forces and Thermodynamics and Phase Diagrams to Crystalline and Non-Crystalline Structures. The second Units, Materials, goes into the details of many materials including Metals, Ceramics, Organic Raw Materials, Polymers, Composites, Biomaterials, and Liquid Crystals and Smart Materials. The third and final unit details Behavior and Properties including Rheological, Mechanical, Thermophysical, Color and Optical, Electrical and Dielectric, Magnetic, Surface Behavior and Tribology, Materials, Environment and Sustainability, and Testing of Materials. Materials: Introduction and Applications features: Basic and advanced Materials concepts Interdisciplinary information that is otherwise scattered consolidated into one work Links to everyday life application like electronics, airplanes, and dental materials Certain topics to be discussed in this textbook are more advanced. These will be presented in shaded gray boxes providing a two-level approach. Depending on whether you are a student of Mechanical Engineering, Electrical Engineering, Engineering Technology, MSE, Chemistry, Physics, etc., you can decide for yourself whether a topic presented on a more advanced level is not important for you—or else essential for you given your professional profile Witold Brostow is Regents Professor of Materials Science and Engineering at the University of North Texas. He is President of the International Council on Materials Education and President of the Scientific Committee of the POLYCHAR World Forum on Advanced Material (42 member countries). He has three honorary doctorates and is a Member of the European Academy of Sciences, Member of the National Academy of Sciences of Mexico, Foreign Member of the National Academy of Engineering of Georgia in Tbilisi and Fellow of the Royal Society of Chemistry in London. His publications have been cited more than 7200 times. Haley Hagg Lobland is the Associate Director of LAPOM at the University of North Texas. She is a Member of the POLYCHAR Scientific Committeee. She has received awards for her research presented at conferences in: Buzios, Rio de Janeiro, Brazil; NIST, Frederick, Maryland; Rouen, France; and Lviv, Ukraine. She has lectured in a number of countries including Poland and Spain. Her publications include joint ones with colleagues in Egypt, Georgia, Germany, India, Israel, Mexico, Poland, Turkey and United Kingdom.
Arthur Willoughby Solar Cell Materials. Developing Technologies Arthur Willoughby Solar Cell Materials. Developing Technologies Новинка

Arthur Willoughby Solar Cell Materials. Developing Technologies

13747.94 руб.
This book presents a comparison of solar cell materials, including both new materials based on organics, nanostructures and novel inorganics and developments in more traditional photovoltaic materials. It surveys the materials and materials trends in the field including third generation solar cells (multiple energy level cells, thermal approaches and the modification of the solar spectrum) with an eye firmly on low costs, energy efficiency and the use of abundant non-toxic materials.
Ashutosh Tiwari Advanced Sensor and Detection Materials Ashutosh Tiwari Advanced Sensor and Detection Materials Новинка

Ashutosh Tiwari Advanced Sensor and Detection Materials

14464.33 руб.
Presents a comprehensive and interdisciplinary review of the major cutting-edge technology research areas—especially those on new materials and methods as well as advanced structures and properties—for various sensor and detection devices The development of sensors and detectors at macroscopic or nanometric scale is the driving force stimulating research in sensing materials and technology for accurate detection in solid, liquid, or gas phases; contact or non-contact configurations; or multiple sensing. The emphasis on reduced-scale detection techniques requires the use of new materials and methods. These techniques offer appealing perspectives given by spin crossover organic, inorganic, and composite materials that could be unique for sensor fabrication. The influence of the length, composition, and conformation structure of materials on their properties, and the possibility of adjusting sensing properties by doping or adding the side-groups, are indicative of the starting point of multifarious sensing. The role of intermolecular interactions, polymer and ordered phase formation, as well as behavior under pressure and magnetic and electric fields are also important facts for processing ultra-sensing materials. The 15 chapters written by senior researchers in Advanced Sensor and Detection Materials cover all these subjects and key features under three foci: 1) principals and perspectives, 2) new materials and methods, and 3) advanced structures and properties for various sensor devices.
José Pomposo A. Single-Chain Polymer Nanoparticles. Synthesis, Characterization, Simulations, and Applications José Pomposo A. Single-Chain Polymer Nanoparticles. Synthesis, Characterization, Simulations, and Applications Новинка

José Pomposo A. Single-Chain Polymer Nanoparticles. Synthesis, Characterization, Simulations, and Applications

13316.34 руб.
This first book on this important and emerging topic presents an overview of the very latest results obtained in single-chain polymer nanoparticles obtained by folding synthetic single polymer chains, painting a complete picture from synthesis via characterization to everyday applications. The initial chapters describe the synthetics methods as well as the molecular simulation of these nanoparticles, while subsequent chapters discuss the analytical techniques that are applied to characterize them, including size and structural characterization as well as scattering techniques. The final chapters are then devoted to the practical applications in nanomedicine, sensing, catalysis and several other uses, concluding with a look at the future for such nanoparticles. Essential reading for polymer and materials scientists, materials engineers, biochemists as well as environmental chemists.
Mrityunjay Singh Advances in Materials Science for Environmental and Energy Technologies Mrityunjay Singh Advances in Materials Science for Environmental and Energy Technologies Новинка

Mrityunjay Singh Advances in Materials Science for Environmental and Energy Technologies

10005.52 руб.
With contributed papers from the 2011 Materials Science and Technology symposia, this is a useful one-stop resource for understanding the most important issues in advances in materials science for environmental and energy technologies. Logically organized and carefully selected, the articles cover the themes of the symposia: Green Technologies for Materials Manufacturing and Processing; Materials Science Challenges for Nuclear Applications; Materials for Nuclear Waste Disposal and Environmental Cleanup; Energy Conversion/Fuel Cells; and Energy Storage: Materials, Systems and Applications.
Sabu Thomas Polymer Composites, Biocomposites Sabu Thomas Polymer Composites, Biocomposites Новинка

Sabu Thomas Polymer Composites, Biocomposites

20298.55 руб.
Polymer composites are materials in which the matrix polymer is reinforced with organic/inorganic fillers of a definite size and shape, leading to enhanced performance of the resultant composite. These materials find a wide number of applications in such diverse fields as geotextiles, building, electronics, medical, packaging, and automobiles. This first systematic reference on the topic emphasizes the characteristics and dimension of this reinforcement. The authors are leading researchers in the field from academia, government, industry, as well as private research institutions across the globe, and adopt a practical approach here, covering such aspects as the preparation, characterization, properties and theory of polymer composites. The book begins by discussing the state of the art, new challenges, and opportunities of various polymer composite systems. Interfacial characterization of the composites is discussed in detail, as is the macro- and micromechanics of the composites. Structure-property relationships in various composite systems are explained with the help of theoretical models, while processing techniques for various macro- to nanocomposite systems and the influence of processing parameters on the properties of the composite are reviewed in detail. The characterization of microstructure, elastic, viscoelastic, static and dynamic mechanical, thermal, tribological, rheological, optical, electrical and barrier properties are highlighted, as well as their myriad applications. Divided into three volumes: Vol. 1. Macro- and Microcomposites; Vol. 2. Nanocomposites; and Vol. 3. Biocomposites.
Tatsuki Ohji Advances in Materials Science for Environmental and Energy Technologies VI Tatsuki Ohji Advances in Materials Science for Environmental and Energy Technologies VI Новинка

Tatsuki Ohji Advances in Materials Science for Environmental and Energy Technologies VI

16196.23 руб.
An excellent one-volume resource for understanding the most important current issues in the research and advances in materials science for environmental and energy technologies This proceedings volume contains a collection of 20 papers from the 2016 Materials Science and Technology (MS&T'16) meeting held in Salt Lake City, UT, from October 24-27 of that year. These conference symposia provided a forum for scientists, engineers, and technologists to discuss and exchange state-of-the-art ideas, information, and technology on advanced methods and approaches for processing, synthesis, characterization, and applications of ceramics, glasses, and composites. Topics covered include: the 8th International Symposium on Green and Sustainable Technologies for Materials Manufacturing Processing; Materials Issues in Nuclear Waste Management in the 21st Century; Construction and Building Materials for a Better Environment; Materials for Nuclear Applications and Extreme Environments; Nanotechnology for Energy, Healthcare, and Industry; and Materials for Processes for CO2 Capture, Conversion and Sequestration. Logically organized and carefully selected articles give insight into advances in materials science for environmental and energy technologies. Incorporates the latest developments related to advances in materials science for environmental and energy technologies Advances in Materials Science for Environmental and Energy Technologies VI: Ceramic Transactions Volume 262 is ideal for academics in mechanical and chemical engineering, materials and or ceramics, chemistry departments and for those working in government laboratories.
Sabu Thomas Polymer Composites, Nanocomposites Sabu Thomas Polymer Composites, Nanocomposites Новинка

Sabu Thomas Polymer Composites, Nanocomposites

19651.14 руб.
Polymer composites are materials in which the matrix polymer is reinforced with organic/inorganic fillers of a definite size and shape, leading to enhanced performance of the resultant composite. These materials find a wide number of applications in such diverse fields as geotextiles, building, electronics, medical, packaging, and automobiles. This first systematic reference on the topic emphasizes the characteristics and dimension of this reinforcement. The authors are leading researchers in the field from academia, government, industry, as well as private research institutions across the globe, and adopt a practical approach here, covering such aspects as the preparation, characterization, properties and theory of polymer composites. The book begins by discussing the state of the art, new challenges, and opportunities of various polymer composite systems. Interfacial characterization of the composites is discussed in detail, as is the macro- and micromechanics of the composites. Structure-property relationships in various composite systems are explained with the help of theoretical models, while processing techniques for various macro- to nanocomposite systems and the influence of processing parameters on the properties of the composite are reviewed in detail. The characterization of microstructure, elastic, viscoelastic, static and dynamic mechanical, thermal, tribological, rheological, optical, electrical and barrier properties are highlighted, as well as their myriad applications. Divided into three volumes: Vol. 1. Macro- and Microcomposites; Vol. 2. Nanocomposites; and Vol. 3. Biocomposites.
Ashutosh Tiwari Advanced Energy Materials Ashutosh Tiwari Advanced Energy Materials Новинка

Ashutosh Tiwari Advanced Energy Materials

14895.94 руб.
An essential resource for scientists designing new energy materials for the vast landscape of solar energy conversion as well as materials processing and characterization Based on the new and fundamental research on novel energy materials with tailor-made photonic properties, the role of materials engineering has been to provide much needed support in the development of photovoltaic devices. Advanced Energy Materials offers a unique, state-of-the-art look at the new world of novel energy materials science, shedding light on the subject’s vast multi-disciplinary approach The book focuses particularly on photovoltaics, efficient light sources, fuel cells, energy-saving technologies, energy storage technologies, nanostructured materials as well as innovating materials and techniques for future nanoscale electronics. Pathways to future development are also discussed. Critical, cutting-edge subjects are addressed, including: Non-imaging focusing heliostat; state-of-the-art of nanostructures Metal oxide semiconductors and their nanocomposites Superionic solids; polymer nanocomposites; solid electrolytes; advanced electronics Electronic and optical properties of lead sulfide High-electron mobility transistors and light-emitting diodes Anti-ferroelectric liquid crystals; PEEK membrane for fuel cells Advanced phosphors for energy-efficient lighting Molecular computation photovoltaics and photocatalysts Photovoltaic device technology and non-conventional energy applications Readership The book is written for a large and broad readership including researchers and university graduate students from diverse backgrounds such as chemistry, materials science, physics, and engineering working in the fields of nanotechnology, photovoltaic device technology, and non-conventional energy.
Hua-Tay Lin Advanced Ceramic Coatings and Materials for Extreme Environments II Hua-Tay Lin Advanced Ceramic Coatings and Materials for Extreme Environments II Новинка

Hua-Tay Lin Advanced Ceramic Coatings and Materials for Extreme Environments II

6330.71 руб.
Exploring advanced ceramic coatings and ultra-high temperature ceramic materials, this issue brings readers up-to-date with important new and emerging findings, materials, and applications. The nineteen papers in this issue originate from two symposia and one focused session held in January 2012, during the 36th International Conference on Advanced Ceramics and Composites (ICACC). With contributions from leading ceramics and materials researchers from around the world, this issue explores the latest advances and key challenges in advanced thermal and environmental coating processing and characterizations, advanced wear corrosion-resistant, nanocomposite, and multi-functional coatings, thermal protection systems, and more.
Mrityunjay Singh Advances in Materials Science for Environmental and Energy Technologies II Mrityunjay Singh Advances in Materials Science for Environmental and Energy Technologies II Новинка

Mrityunjay Singh Advances in Materials Science for Environmental and Energy Technologies II

9573.23 руб.
These proceedings contains a collection of 24 papers from five 2012 Materials Science and Technology (MS&T’12) symposia. Green Technologies for Materials Manufacturing and Processing III Materials Development for Nuclear Applications and Extreme Environments Materials Issues in Nuclear Waste Management in the 21st Century Energy Conversion – Photovoltaic, Concentrating Solar Power, and Thermoelectric Energy Storage: Materials, Systems and Applications
Mrityunjay Singh Ceramics for Environmental Systems Mrityunjay Singh Ceramics for Environmental Systems Новинка

Mrityunjay Singh Ceramics for Environmental Systems

12596.53 руб.
This volume contains a collection of 14 papers submitted from the below five symposia held during the 11th International Symposium on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE-11), June 14-19, 2015 in Vancouver, BC, Canada: Photocatalysts for Energy and Environmental Applications Advanced Functional Materials, Devices, and Systems for the Environment Geopolymers, Inorganic Polymer Ceramics and Sustainable Composites Macroporous Ceramics For Environmental and Energy Applications Advanced Sensors for Energy, Environment, and Health Applications
Ashutosh Tiwari Advanced Engineering Materials and Modeling Ashutosh Tiwari Advanced Engineering Materials and Modeling Новинка

Ashutosh Tiwari Advanced Engineering Materials and Modeling

16196.23 руб.
The engineering of materials with advanced features is driving the research towards the design of innovative materials with high performances. New materials often deliver the best solution for structural applications, precisely contributing towards the finest combination of mechanical properties and low weight. The mimicking of nature's principles lead to a new class of structural materials including biomimetic composites, natural hierarchical materials and smart materials. Meanwhile, computational modeling approaches are the valuable tools complementary to experimental techniques and provide significant information at the microscopic level and explain the properties of materials and their very existence. The modeling also provides useful insights to possible strategies to design and fabricate materials with novel and improved properties. The book brings together these two fascinating areas and offers a comprehensive view of cutting-edge research on materials interfaces and technologies the engineering materials. The topics covered in this book are divided into 2 parts: Engineering of Materials, Characterizations & Applications and Computational Modeling of Materials. The chapters include the following: Mechanical and resistance behavior of structural glass beams Nanocrystalline metal carbides – microstructure characterization SMA-reinforced laminated glass panel Sustainable sugarcane bagasse cellulose for papermaking Electrospun scaffolds for cardiac tissue engineering Bio-inspired composites Density functional theory for studying extended systems First principles based approaches for modeling materials Computer aided materials design Computational materials for stochastic electromagnets Computational methods for thermal analysis of heterogeneous materials Modelling of resistive bilayer structures Modeling tunneling of superluminal photons through Brain Microtubules Computer aided surgical workflow modeling Displaced multiwavelets and splitting algorithms
Tatsuki Ohji Advances in Materials Science for Environmental and Energy Technologies V Tatsuki Ohji Advances in Materials Science for Environmental and Energy Technologies V Новинка

Tatsuki Ohji Advances in Materials Science for Environmental and Energy Technologies V

12596.53 руб.
This proceedings volume contains a collection of 20 papers from the following symposia held during the 2015 Materials Science and Technology (MS&T '15) meeting: 7th International Symposium on Green and Sustainable Technologies for Materials Manufacturing Processing Materials for Nuclear Applications and Extreme Environments Materials Issues in Nuclear Waste Management in the 21st Century Nanotechnology for Energy, Healthcare and Industry Materials for Processes for CO2 Capture, Conversion and Sequestration Hybrid Organic – Inorganic Materials for Alternative Energy

кешбака
Страницы:


Presents a fully interdisciplinary approach with a stronger emphasis on polymers and composites than traditional materials books Materials science and engineering is an interdisciplinary field involving the properties of matter and its applications to various areas of science and engineering. Polymer materials are often mixed with inorganic materials to enhance their mechanical, electrical, thermal, and physical properties. Materials: Introduction and Applications addresses a gap in the existing textbooks on materials science. This book focuses on three Units. The first, Foundations, includes basic materials topics from Intermolecular Forces and Thermodynamics and Phase Diagrams to Crystalline and Non-Crystalline Structures. The second Units, Materials, goes into the details of many materials including Metals, Ceramics, Organic Raw Materials, Polymers, Composites, Biomaterials, and Liquid Crystals and Smart Materials. The third and final unit details Behavior and Properties including Rheological, Mechanical, Thermophysical, Color and Optical, Electrical and Dielectric, Magnetic, Surface Behavior and Tribology, Materials, Environment and Sustainability, and Testing of Materials. Materials: Introduction and Applications features: Basic and advanced Materials concepts Interdisciplinary information that is otherwise scattered consolidated into one work Links to everyday life application like electronics, airplanes, and dental materials Certain topics to be discussed in this textbook are more advanced. These will be presented in shaded gray boxes providing a two-level approach. Depending on whether you are a student of Mechanical Engineering, Electrical Engineering, Engineering Technology, MSE, Chemistry, Physics, etc., you can decide for yourself whether a topic presented on a more advanced level is not important for you—or else essential for you given your professional profile Witold Brostow is Regents Professor of Materials Science and Engineering at the University of North Texas. He is President of the International Council on Materials Education and President of the Scientific Committee of the POLYCHAR World Forum on Advanced Material (42 member countries). He has three honorary doctorates and is a Member of the European Academy of Sciences, Member of the National Academy of Sciences of Mexico, Foreign Member of the National Academy of Engineering of Georgia in Tbilisi and Fellow of the Royal Society of Chemistry in London. His publications have been cited more than 7200 times. Haley Hagg Lobland is the Associate Director of LAPOM at the University of North Texas. She is a Member of the POLYCHAR Scientific Committeee. She has received awards for her research presented at conferences in: Buzios, Rio de Janeiro, Brazil; NIST, Frederick, Maryland; Rouen, France; and Lviv, Ukraine. She has lectured in a number of countries including Poland and Spain. Her publications include joint ones with colleagues in Egypt, Georgia, Germany, India, Israel, Mexico, Poland, Turkey and United Kingdom.
Продажа photo and thermal stabilization for polymer materials лучших цены всего мира
Посредством этого сайта магазина - каталога товаров мы очень легко осуществляем продажу photo and thermal stabilization for polymer materials у одного из интернет-магазинов проверенных фирм. Определитесь с вашими предпочтениями один интернет-магазин, с лучшей ценой продукта. Прочитав рекомендации по продаже photo and thermal stabilization for polymer materials легко охарактеризовать производителя как превосходную и доступную фирму.