utilization of crumb rubber modifier in asphalt concrete mixtures



Kim Elliott S. Modernisation, Mechanisation and Industrialisation of Concrete Structures Kim Elliott S. Modernisation, Mechanisation and Industrialisation of Concrete Structures Новинка

Kim Elliott S. Modernisation, Mechanisation and Industrialisation of Concrete Structures

9220.57 руб.
Modernisation, Mechanisation and Industrialisation of Concrete Structures discusses the manufacture of high quality prefabricated concrete construction components, and how that can be achieved through the application of developments in concrete technology, information modelling and best practice in design and manufacturing techniques.
Roger Prud'homme Flows and Chemical Reactions in Heterogeneous Mixtures Roger Prud'homme Flows and Chemical Reactions in Heterogeneous Mixtures Новинка

Roger Prud'homme Flows and Chemical Reactions in Heterogeneous Mixtures

8174.01 руб.
This book – a sequel of previous publications 'Flows and Chemical Reactions' and 'Chemical Reactions in Flows and Homogeneous Mixtures' – is devoted to flows with chemical reactions in heterogeneous environments. Heterogeneous media in this volume include interfaces and lines. They may be the site of radiation. Each type of flow is the subject of a chapter in this volume. We consider first, in Chapter 1, the question of the generation of environments biphasic individuals: dusty gas, mist, bubble flow. Chapter 2 is devoted to the study at the mesoscopic scale: particle-fluid exchange of momentum and heat with determination of the respective exchange coefficients. In Chapter 3, we establish simplified equations of macroscopic balance for mass, for the momentum and energy, in the case of particles of one size (monodisperse suspension). Radiative phenomena are presented in Chapter 5.
Jean-Pierre Ollivier Physical Properties of Concrete and Concrete Constituents Jean-Pierre Ollivier Physical Properties of Concrete and Concrete Constituents Новинка

Jean-Pierre Ollivier Physical Properties of Concrete and Concrete Constituents

12373.78 руб.
Understanding the rheological properties of fresh concrete, the hydration phenomenon of cement responsible for structuration, the relationship between the characteristics of the porous solid obtained and its mechanical performances or resistance to the aggressive penetration requires a complex knowledge of the physicochemistry of reactive porous materials. The development of simple formulation rules therefore requires the assimilation of this knowledge and a good command of the properties of these materials. The purpose of this book is to provide the mix designer with useful knowledge on granular materials and porous materials, which will enable the innovative design of concrete. Topics covered include the characterization of granular materials, the concepts of porosity and specific surface area, and the transport properties (diffusion and permeation) of concrete. Some of these topics are already covered in other general books dedicated to granular or porous materials. The objective here is to bring them together in one book by adapting them for use by concrete specialists. Applications in the form of exercises are offered at the end of each chapter to enable readers to assimilate the theoretical knowledge and to apply such knowledge to concrete problems encountered in civil engineering. Contents 1. Description of Granular Materials, Definitions. 2. Granulometry. 3. Specific Surface Area of Materials. 4. Voids in Granular Materials and the Arrangement of Grains. 5. Voids in Concrete. 6. The Fundamentals of Diffusion. 7. Permeability.
Robert Crumb. The Sketchbooks 1982-2011 Robert Crumb. The Sketchbooks 1982-2011 Новинка

Robert Crumb. The Sketchbooks 1982-2011

50180 руб.
The father of the underground comix movement, Robert Crumb is one of the most celebrated comic artists working today. Now aged 68, Crumb's work on Keep on Truckin,...
Monique Elseviers Drug Utilization Research. Methods and Applications Monique Elseviers Drug Utilization Research. Methods and Applications Новинка

Monique Elseviers Drug Utilization Research. Methods and Applications

10245.08 руб.
Drug Utilization Research (DUR) is an eclectic scientific discipline, integrating descriptive and analytical methods for the quantification, understanding and evaluation of the processes of prescribing, dispensing and consumption of medicines and for the testing of interventions to enhance the quality of these processes. The discipline is closely related and linked mainly to the broader field of pharmacoepidemiology, but also to health outcomes research, pharmacovigilance and health economics. Drug Utilization Research is a unique, practical guide to the assessment and evaluation of prescribing practices and to interventions to improve the use of medicines in populations. Edited by an international expert team from the International Society for Pharmacoepidemiology (ISPE), DUR is the only title to cover both the methodology and applications of drug utilization research and covers areas such as health policy, specific populations, therapeutics and adherence.
Roger Prud'homme Flows and Chemical Reactions in Homogeneous Mixtures Roger Prud'homme Flows and Chemical Reactions in Homogeneous Mixtures Новинка

Roger Prud'homme Flows and Chemical Reactions in Homogeneous Mixtures

9973.3 руб.
Flows with chemical reactions can occur in various fields such as combustion, process engineering, aeronautics, the atmospheric environment and aquatics. The examples of application chosen in this book mainly concern homogeneous reactive mixtures that can occur in propellers within the fields of process engineering and combustion: – propagation of sound and monodimensional flows in nozzles, which may include disequilibria of the internal modes of the energy of molecules; – ideal chemical reactors, stabilization of their steady operation points in the homogeneous case of a perfect mixture and classical instruments of experimental and theoretical analysis such as population balances, and the distribution of residence and passage times; – laminar and turbulent flames, separating those which are premixed from those which are not and which do not exhibit the same mechanisms, but which also occur in the case of triple flames. Flows and Chemical Reactions in Homogeneous Mixtures provides information on dimensional analysis, statistical thermodynamics with coupling between internal modes and chemical reactions, the apparition and damping of fluid turbulence as well as its statistical processing, bifurcations, flames in a confined medium and diffusion. Contents 1. Flows in Nozzles. 2. Chemical Reactors. 3. Laminar and Turbulent Flames. Appendix 1. Dimensionless Numbers, Similarity. Appendix 2. Thermodynamic Functions. Appendix 3. Concepts of Turbulence. Appendix 4. Thermodynamic functions for a mixture in disequilibrium. Appendix 5. Notion of bifurcation. Appendix 6. Confined flame. Appendix 7. Limits of Validity of the First-order Expansions for Diffusion Flames. About the Authors Roger Prud’homme has been Emeritus Research Director at CNRS, in France, since 2004. His most recent research topics have included flames (premixed flame modeling and their behavior in microgravity), two phase flows (droplet combustion with condensation of the products, sound propagation in suspensions, vortex, chock wave structure) and the modeling of fluid interfaces. He has published 5 books, 7 contributions to volumes and 50 publications in international journals.
Olivier Coussy Mechanics and Physics of Porous Solids Olivier Coussy Mechanics and Physics of Porous Solids Новинка

Olivier Coussy Mechanics and Physics of Porous Solids

12057.62 руб.
Mechanics and Physics of Porous Solids addresses the mechanics and physics of deformable porous materials whose porous space is filled by one or several fluid mixtures interacting with the solid matrix. Coussy uses the language of thermodynamics to frame the discussion of this topic and bridge the gap between physicists and engineers, and organises the material in such a way that individual phases are explored, followed by coupled problems of increasing complexity. This structure allows the reader to build a solid understanding of the physical processes occurring in the fluids and then porous solids. Mechanics and Physics of Porous Solids offers a critical reference on the physics of multiphase porous materials – key reading for engineers and researchers in structural and material engineering, concrete, wood and materials science, rock and soil mechanics, mining and oil prospecting, biomechanics.
Olivier Coussy Mechanics and Physics of Porous Solids Olivier Coussy Mechanics and Physics of Porous Solids Новинка

Olivier Coussy Mechanics and Physics of Porous Solids

11623.19 руб.
Mechanics and Physics of Porous Solids addresses the mechanics and physics of deformable porous materials whose porous space is filled by one or several fluid mixtures interacting with the solid matrix. Coussy uses the language of thermodynamics to frame the discussion of this topic and bridge the gap between physicists and engineers, and organises the material in such a way that individual phases are explored, followed by coupled problems of increasing complexity. This structure allows the reader to build a solid understanding of the physical processes occurring in the fluids and then porous solids. Mechanics and Physics of Porous Solids offers a critical reference on the physics of multiphase porous materials – key reading for engineers and researchers in structural and material engineering, concrete, wood and materials science, rock and soil mechanics, mining and oil prospecting, biomechanics.
Zongjin Li Advanced Concrete Technology Zongjin Li Advanced Concrete Technology Новинка

Zongjin Li Advanced Concrete Technology

11998.84 руб.
Over the past two decades concrete has enjoyed a renewed level of research and testing, resulting in the development of many new types of concrete. Through the use of various additives, production techniques and chemical processes, there is now a great degree of control over the properties of specific concretes for a wide range of applications. New theories, models and testing techniques have also been developed to push the envelope of concrete as a building material. There is no current textbook which brings all of these advancements together in a single volume. This book aims to bridge the gap between the traditional concrete technologies and the emerging state-of-the-art technologies which are gaining wider use.
Anil Anal Kumar Food Processing By-Products and their Utilization Anil Anal Kumar Food Processing By-Products and their Utilization Новинка

Anil Anal Kumar Food Processing By-Products and their Utilization

14248.49 руб.
Food Processing By-Products and their Utilization An in-depth look at the economic and environmental benefits that food companies can achieve—and the challenges and opportunities they may face—by utilizing food processing by-products Food Processing By-Products and their Utilization is the first book dedicated to food processing by-products and their utilization in a broad spectrum. It provides a comprehensive overview on food processing by-products and their utilization as source of novel functional ingredients. It discusses food groups, including cereals, pulses, fruits, vegetables, meat, dairy, marine, sugarcane, winery, and plantation by-products; addresses processing challenges relevant to food by-products; and delivers insight into the current state of art and emerging technologies to extract valuable phytochemicals from food processing by-products. Food Processing By-Products and their Utilization offers in-depth chapter coverage of fruit processing by-products; the application of food by-products in medical and pharmaceutical industries; prebiotics and dietary fibers from food processing by-products; bioactive compounds and their health effects from honey processing industries; advances in milk fractionation for value addition; seafood by-products in applications of biomedicine and cosmeticuals; food industry by-products as nutrient replacements in aquaculture diets and agricultural crops; regulatory and legislative issues for food waste utilization; and much more. The first reference text to bring together essential information on the processing technology and incorporation of by-products into various food applications Concentrates on the challenges and opportunities for utilizing by-products, including many novel and potential uses for the by-products and waste materials generated by food processing Focuses on the nutritional composition and biochemistry of by-products, which are key to establishing their functional health benefits as foods Part of the «IFST Advances in Food Science» series, co-published with the Institute of Food Science and Technology (UK) This bookserves as a comprehensive reference for students, educators, researchers, food processors, and industry personnel looking for up-to-date insight into the field. Additionally, the covered range of techniques for by-product utilization will provide engineers and scientists working in the food industry with a valuable resource for their work.
Zongjin Li Advanced Concrete Technology Zongjin Li Advanced Concrete Technology Новинка

Zongjin Li Advanced Concrete Technology

12446.57 руб.
Over the past two decades concrete has enjoyed a renewed level of research and testing, resulting in the development of many new types of concrete. Through the use of various additives, production techniques and chemical processes, there is now a great degree of control over the properties of specific concretes for a wide range of applications. New theories, models and testing techniques have also been developed to push the envelope of concrete as a building material. There is no current textbook which brings all of these advancements together in a single volume. This book aims to bridge the gap between the traditional concrete technologies and the emerging state-of-the-art technologies which are gaining wider use.
Alshibli Khalid A. Advances in Computed Tomography for Geomaterials. GeoX 2010 Alshibli Khalid A. Advances in Computed Tomography for Geomaterials. GeoX 2010 Новинка

Alshibli Khalid A. Advances in Computed Tomography for Geomaterials. GeoX 2010

19525.56 руб.
This title discusses a broad range of issues related to the use of computed tomography in geomaterials and geomechanics. The contributions cover a wide range of topics, including deformation and strain localization in soils, rocks and sediments; fracture and damage assessment in rocks, asphalt and concrete; transport in porous media; oil and gas exploration and production; neutron tomography and other novel experimental and analytical techniques; image-based computational modeling; and software and visualization tools. As such, this will be valuable reading for anyone interested in the application of computed tomography to geomaterials from both fundamental and applied perspectives.
Konrad Bergmeister Concrete Structures for Wind Turbines Konrad Bergmeister Concrete Structures for Wind Turbines Новинка

Konrad Bergmeister Concrete Structures for Wind Turbines

5624.83 руб.
The wind energy industry in Germany has an excellent global standing when it comes to the development and construction of wind turbines. Germany currently represents the world's largest market for wind energy. The ongoing development of ever more powerful wind turbines plus additional requirements for the design and construction of their offshore foundation structures exceeds the actual experiences gained so far in the various disciplines concerned. This book gives a comprehensive overview for planning and structural design analysis of reinforced concrete and pre-stressed concrete wind turbine towers for both, onshore and offshore wind turbines. Wind turbines represent structures subjected to highly dynamic loading patterns. Therefore, for the design of loadbearing structures, fatigue effects – and not just maximum loads – are extremely important, in particular in the connections and joints of concrete and hybrid structures. There multi-axial stress conditions occure which so far are not covered by the design codes. The specific actions, the nonlinear behaviour and modeling for the structural analysis are explained. Design and verification with a focus on fatigue are adressed. The chapter Manufacturing includes hybrid structures, segmental construction of pre-stressed concrete towers and offshore wind turbine foundations. Selected chapters from the German concrete yearbook are now being published in the new English «Beton-Kalender Series» for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn «Beton-Kalender» has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in «ferro-concrete» structures until – as the book's first editor, Fritz von Emperger (1862-1942), expressed it – the «tempestuous development» in this form of construction came to an end. However, the «Beton-Kalender» quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since.
Millard Alain Dynamic Behavior of Concrete and Seismic Engineering Millard Alain Dynamic Behavior of Concrete and Seismic Engineering Новинка

Millard Alain Dynamic Behavior of Concrete and Seismic Engineering

15324.84 руб.
While the static behavior of concrete has been the subject of numerous works, the same cannot be said for the dynamic behavior. This book sets out to remedy this situation: it begins by presenting the most frequently used experimental techniques in the study of the dynamic behavior of concrete, then continues by examining seismicity and seismic behavior, soil behavior, models of concrete structures subject to seismic activity, seismic calculation methods of structures, and paraseismic engineering.
Luca Bertolini Corrosion of Steel in Concrete. Prevention, Diagnosis, Repair Luca Bertolini Corrosion of Steel in Concrete. Prevention, Diagnosis, Repair Новинка

Luca Bertolini Corrosion of Steel in Concrete. Prevention, Diagnosis, Repair

14698.13 руб.
Steel-reinforced concrete is used ubiquitously as a building material due to its unique combination of the high compressive strength of concrete and the high tensile strength of steel. Therefore, reinforced concrete is an ideal composite material that is used for a wide range of applications in structural engineering such as buildings, bridges, tunnels, harbor quays, foundations, tanks and pipes. To ensure durability of these structures, however, measures must be taken to prevent, diagnose and, if necessary, repair damage to the material especially due to corrosion of the steel reinforcement. The book examines the different aspects of corrosion of steel in concrete, starting from basic and essential mechanisms of the phenomenon, moving up to practical consequences for designers, contractors and owners both for new and existing reinforced and prestressed concrete structures. It covers general aspects of corrosion and protection of reinforcement, forms of attack in the presence of carbonation and chlorides, problems of hydrogen embrittlement as well as techniques of diagnosis, monitoring and repair. This second edition updates the contents with recent findings on the different topics considered and bibliographic references, with particular attention to recent European standards. This book is a self-contained treatment for civil and construction engineers, material scientists, advanced students and architects concerned with the design and maintenance of reinforced concrete structures. Readers will benefit from the knowledge, tools, and methods needed to understand corrosion in reinforced concrete and how to prevent it or keep it within acceptable limits.
Viggo Norn Emulsifiers in Food Technology Viggo Norn Emulsifiers in Food Technology Новинка

Viggo Norn Emulsifiers in Food Technology

15447.31 руб.
Emulsifiers are essential components of many industrial food recipes. They have the ability to act at the interface between two phases, and so can stabilise the desired mix of oil and water in a mayonnaise, ice cream or salad dressing. They can also stabilise gas/liquid mixtures in foams. More than that, they are increasingly employed in textural and organoleptic modification, in shelf life enhancement, and as complexing or stabilising agents for other components such as starch or protein. Applications include modifying the rheology of chocolate, the strengthening of dough, crumb softening and the retardation of staling in bread. This volume, now in a revised and updated second edition, introduces emulsifiers to those previously unfamiliar with their functions, and provides a state of the art account of their chemistry, manufacture, application and legal status for more experienced food technologists. Each chapter considers one of the main chemical groups of food emulsifiers. Within each group the structures of the emulsifiers are considered, together with their modes of action. This is followed by a discussion of their production / extraction and physical characteristics, together with practical examples of their application. Appendices cross-reference emulsifier types with applications, and give E-numbers, international names, synonyms and references to analytical standards and methods. This is a book for food scientists and technologists, ingredients suppliers and quality assurance personnel.
Kefei Li Durability Design of Concrete Structures. Phenomena, Modeling, and Practice Kefei Li Durability Design of Concrete Structures. Phenomena, Modeling, and Practice Новинка

Kefei Li Durability Design of Concrete Structures. Phenomena, Modeling, and Practice

10124.13 руб.
Comprehensive coverage of durability of concrete at both material and structural levels, with design related issues Links two active fields in materials science and structural engineering: the durability processes of concrete materials and design methods of concrete structures Facilitates communication between the two communities, helping to implement life-cycle concepts into future design methods of concrete structures Presents state-of-the-art information on the deterioration mechanism and performance evolution of structural concrete under environmental actions and the design methods for durability of concrete structures Provides efficient support and practical tools for life-cycle oriented structural design which has been widely recognized as a new generation of design philosophy for engineering structures The author has long experience working with the topic and the materials presented have been part of the author's current teaching course of Durability and Assessment of Engineering Structures for graduate students at Tsinghua University The design methods and approaches for durability of concrete structures are developed from newly finished high level research projects and have been employed as recommended provisions in design code including Chinese Code and Eurocode 2
Thomas K. Sabu Rubber Nanocomposites. Preparation, Properties and Applications Thomas K. Sabu Rubber Nanocomposites. Preparation, Properties and Applications Новинка

Thomas K. Sabu Rubber Nanocomposites. Preparation, Properties and Applications

30182.94 руб.
Rubber Nanocomposites: Preparation, Properties and Applications focuses on the preparation, characterization and properties of natural and synthetic rubber nanocomposites. The book carefully debates the preparation of unmodified and modified nanofillers, various manufacturing techniques of rubber nanocomposites, structure, morphology and properties of nanocomposites. The text reviews the processing; characterization and properties of 0-, 1D and 2D nanofiller reinforced rubber nanocomposites. It examines the polymer/filler interaction, i.e., the compatibility between matrix and filler using unmodified and modified nanofillers. The book also examines the applications of rubber nanocomposites in various engineering fields, which include tyre engineering. The book also examines the current state of the art, challenges and applications in the field of rubber nanocomposites. The handpicked selection of topics and expert contributions make this survey of rubber nanocomposites an outstanding resource for anyone involved in the field of polymer materials design. A handy «one stop» reference resource for important research accomplishments in the area of rubber nanocomposites. Covers the various aspects of preparation, characterization, morphology, properties and applications of rubber nanocomposites. Summarizes many of the recent technical research accomplishments in the area of nanocomposites, in a comprehensive manner It covers an up to date record on the major findings and observations in the field
Michael Ignaz Schmidt Ultra-High Performance Concrete UHPC. Fundamentals, Design, Examples Michael Ignaz Schmidt Ultra-High Performance Concrete UHPC. Fundamentals, Design, Examples Новинка

Michael Ignaz Schmidt Ultra-High Performance Concrete UHPC. Fundamentals, Design, Examples

5245.62 руб.
Selected chapters from the German concrete yearbook are now being published in the new English «Beton-Kalender Series» for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn «Beton-Kalender» has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in «ferro-concrete» structures until – as the book's first editor, Fritz von Emperger (1862-1942), expressed it – the «tempestuous development» in this form of construction came to an end. However, the «Beton-Kalender» quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since. Ultra high performance concrete (UHPC) is a milestone in concrete technology and application. It permits the construction of both more slender and more durable concrete structures with a prolonged service life and thus improved sustainability. This book is a comprehensive overview of UHPC – from the principles behind its production and its mechanical properties to design and detailing aspects. The focus is on the material behaviour of steel fibre-reinforced UHPC. Numerical modelling and detailing of the connections with reinforced concrete elements are featured as well. Numerous examples worldwide – bridges, columns, facades and roofs – are the basis for additional explanations about the benefits of UHPC and how it helps to realise several architectural requirements. The authors are extensively involved in the testing, design, construction and monitoring of UHPC structures. What they provide here is therefore a unique synopsis of the state of the art with a view to practical applications.
Jean Cornier Pharmaceutical Nanotechnology. Innovation and Production, 2 Volumes Jean Cornier Pharmaceutical Nanotechnology. Innovation and Production, 2 Volumes Новинка

Jean Cornier Pharmaceutical Nanotechnology. Innovation and Production, 2 Volumes

25121.79 руб.
With its focus on concrete methods and recent advances in applying nanotechnology to develop new drug therapies and medical diagnostics, this book provides an overall picture of the field, from the fundamentals of nanopharmacy with the characterisation and manufacturing methods to the role of nanoparticles and substances. Actual examples of utilization include drug development issues, translation to the clinic, market prospects, and industrial commercialization aspects. The applications described are taken from cancer treatment as well as other major therapeutic areas, such as infectious diseases and dermatology. An in-depth discussion on safety, regulatory, and societal aspects rounds off the book. Written by a top team of editors and authors composed of the leading experts in Europe and the USA who have pioneered the field of nanopharmacy!
Costas Georgopoulos Sustainable Concrete Solutions Costas Georgopoulos Sustainable Concrete Solutions Новинка

Costas Georgopoulos Sustainable Concrete Solutions

6824.36 руб.
The challenges facing humanity in the 21st century include climate change, population growth, overconsumption of resources, overproduction of waste and increasing energy demands. For construction practitioners, responding to these challenges means creating a built environment that provides accommodation and infrastructure with better whole-life performance using lower volumes of primary materials, less non-renewable energy, wasting less and causing fewer disturbances to the natural environment. Concrete is ubiquitous in the built environment. It is therefore essential that it is used in the most sustainable way so practitioners must become aware of the range of sustainable concrete solutions available for construction. While sustainable development has been embedded into engineering curricula, it can be difficult for students and academics to be fully aware of the innovations in sustainable construction that are developed by the industry. Sustainable Concrete Solutions serves as an introduction to and an overview of the latest developments in sustainable concrete construction. It provides useful guidance, with further references, to students, researchers, academics and practitioners of all construction disciplines who are faced with the challenge of designing, specifying and constructing with concrete.
М. С. Majo Income and health care utilization among the 50+ in Europe and the US М. С. Majo Income and health care utilization among the 50+ in Europe and the US Новинка

М. С. Majo Income and health care utilization among the 50+ in Europe and the US

79.9 руб.
This study addresses the question how income affects health care utilization by the population aged 50 and over in the United States and a number of European countries with varying health care systems. The probabilities that individuals receive several medical services (visits to general practitioner, specialist, dentist, inpatient, or outpatient services) are analyzed separately using probit models. In addition to controls for income and demographic characteristics, controls for health status (both subjective and objective measures of health) are used. We analyze how the relationship between income and health care utilization varies across countries and relate these cross country differences to characteristics of the health care system, i. e., per capita total and public expenditure on health care, gate-keeping for specialist care, and copayments.
Jinghong Li Hydrogen Generation, Storage and Utilization Jinghong Li Hydrogen Generation, Storage and Utilization Новинка

Jinghong Li Hydrogen Generation, Storage and Utilization

8998.6 руб.
The potential use of hydrogen as a clean and renewable fuel resource has generated significant attention in recent years, especially given the rapidly increasing demand for energy sources and the dwindling availability of fossil fuels. Hydrogen is an “ideal fuel” in several ways. Its only byproduct of consumption is water; it is the most abundant element in the universe; and it is available at low cost. Hydrogen generation is possible via a number of possible chemical processes, to separate the hydrogen from its bond with atoms such as carbon, nitrogen, and oxygen. In this book, the authors provide the scientific foundations for established and innovative methods of hydrogen extraction; outline solutions for its storage; and illustrate its applications in the fields of petroleum, chemical, metallurgical, physics, and manufacturing. Addresses the three fundamental aspects of hydrogen as a fuel resource: generation, storage, and utilization Provides theoretical basis for the chemical processes required for hydrogen generation, including solar, photoelectrochemical, thermochemical, and fermentation methods Discusses storage of hydrogen based on metal hydrides, hydrocarbons, high pressure compression, and cryogenics Examines the applications of hydrogen utilization in the fields of petroleum, chemical, metallurgical, physics, and manufacturing Contains over 90 figures, including 27 color figures
Roger Prud'homme Flows and Chemical Reactions in an Electromagnetic Field Roger Prud'homme Flows and Chemical Reactions in an Electromagnetic Field Новинка

Roger Prud'homme Flows and Chemical Reactions in an Electromagnetic Field

9257.14 руб.
This book – a sequel of previous publications ‘Flows and Chemical Reactions’, ‘Chemical Reactions Flows in Homogeneous Mixtures’ and ‘Chemical Reactions and Flows in Heterogeneous Mixtures’ – is devoted to flows with chemical reactions in the electromagnetic field. The first part, entitled basic equations, consists of four chapters. The first chapter provides an overview of the equations of electromagnetism in Minkowski spacetime. This presentation is extended to balance equations, first in homogeneous media unpolarized in the second chapter and homogeneous fluid medium polarized in the third chapter. Chapter four is devoted to heterogeneous media in the presence of electromagnetic field. Balance equations at interfaces therein. The second part of this volume is entitled applications. It also includes four chapters. Chapter five provides a study of the action of fields on fire. Chapter six deals with a typical application for the Peltier effect, chapter seven is devoted to metal-plasma interaction, especially in the Langmuir probe and finally Chapter Eight deals with the propulsion Hall effect. Are given in appendix supplements the laws of balance with electromagnetic field and described the methodology for establishing one-dimensional equations for flow comprising active walls as is the case in some Hall effect thrusters.
Colin Jolly Multi-Storey Precast Concrete Framed Structures Colin Jolly Multi-Storey Precast Concrete Framed Structures Новинка

Colin Jolly Multi-Storey Precast Concrete Framed Structures

11623.19 руб.
Precast reinforced and prestressed concrete frames provide a high strength, stable, durable and robust solution for any multi-storey structure, and are widely regarded as a high quality, economic and architecturally versatile technology for the construction of multi-storey buildings. The resulting buildings satisfy a wide range of commercial and industrial needs. Precast concrete buildings behave in a different way to those where the concrete is cast in-situ, with the components subject to different forces and movements. These factors are explored in detail in the second edition of Multi-Storey Precast Concrete Framed Structures, providing a detailed understanding of the procedures involved in precast structural design. This new edition has been fully updated to reflect recent developments, and includes many structural calculations based on EUROCODE standards. These are shown in parallel with similar calculations based on British Standards to ensure the designer is fully aware of the differences required in designing to EUROCODE standards. Civil and structural engineers as well as final year undergraduate and postgraduate students of civil and structural engineering will all find this book to be thorough overview of this important construction technology.
Robert Crumb. Sketchbook, Vol. 4: 1982-1989 Robert Crumb. Sketchbook, Vol. 4: 1982-1989 Новинка

Robert Crumb. Sketchbook, Vol. 4: 1982-1989

4370 руб.
The first three volumes of this series were met with fervent acclaim from our readers, most of whom have been lying in wait for an affordable trade edition since the $...
Ledru Patrick Geothermal Energy Systems. Exploration, Development, and Utilization Ledru Patrick Geothermal Energy Systems. Exploration, Development, and Utilization Новинка

Ledru Patrick Geothermal Energy Systems. Exploration, Development, and Utilization

12057.62 руб.
Presenting boundary conditions for the economic and environmental utilization of geothermal technology, this is the first book to provide basic knowledge on the topic in such detail. The editor is the coordinator of the European Geothermic Research Initiative, while the authors are experts for the various geological situations in Europe with high temperature reservoirs in shallow and deep horizons. With its perspectives for R&D in geothermic technology concluding each chapter, this ready reference will be of great value to scientists and decision-makers in research and politics, as well as those giving courses in petroleum engineering, for example.
Jostein Hellesland Reinforced Concrete Beams, Columns and Frames. Mechanics and Design Jostein Hellesland Reinforced Concrete Beams, Columns and Frames. Mechanics and Design Новинка

Jostein Hellesland Reinforced Concrete Beams, Columns and Frames. Mechanics and Design

11994.57 руб.
This book is focused on the theoretical and practical design of reinforced concrete beams, columns and frame structures. It is based on an analytical approach of designing normal reinforced concrete structural elements that are compatible with most international design rules, including for instance the European design rules – Eurocode 2 – for reinforced concrete structures. The book tries to distinguish between what belongs to the structural design philosophy of such structural elements (related to strength of materials arguments) and what belongs to the design rule aspects associated with specific characteristic data (for the material or loading parameters). Reinforced Concrete Beams, Columns and Frames – Mechanics and Design deals with the fundamental aspects of the mechanics and design of reinforced concrete in general, both related to the Serviceability Limit State (SLS) and the Ultimate Limit State (ULS). A second book, entitled Reinforced Concrete Beams, Columns and Frames – Section and Slender Member Analysis, deals with more advanced ULS aspects, along with instability and second-order analysis aspects. Some recent research results including the use of non-local mechanics are also presented. This book is aimed at Masters-level students, engineers, researchers and teachers in the field of reinforced concrete design. Most of the books in this area are very practical or code-oriented, whereas this book is more theoretically based, using rigorous mathematics and mechanics tools. Contents 1. Design at Serviceability Limit State (SLS). 2. Verification at Serviceability Limit State (SLS). 3. Concepts for the Design at Ultimate Limit State (ULS). 4. Bending-Curvature at Ultimate Limit State (ULS). Appendix 1. Cardano’s Method. Appendix 2. Steel Reinforcement Table. About the Authors Charles Casandjian was formerly Associate Professor at INSA (French National Institute of Applied Sciences), Rennes, France and the chairman of the course on reinforced concrete design. He has published work on the mechanics of concrete and is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX. Noël Challamel is Professor in Civil Engineering at UBS, University of South Brittany in France and chairman of the EMI-ASCE Stability committee. His contributions mainly concern the dynamics, stability and inelastic behavior of structural components, with special emphasis on Continuum Damage Mechanics (more than 70 publications in International peer-reviewed journals). Christophe Lanos is Professor in Civil Engineering at the University of Rennes 1 in France. He has mainly published work on the mechanics of concrete, as well as other related subjects. He is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX. Jostein Hellesland has been Professor of Structural Mechanics at the University of Oslo, Norway since January 1988. His contribution to the field of stability has been recognized and magnified by many high-quality papers in famous international journals such as Engineering Structures, Thin-Walled Structures, Journal of Constructional Steel Research and Journal of Structural Engineering.
John Cornell A. A Primer on Experiments with Mixtures John Cornell A. A Primer on Experiments with Mixtures Новинка

John Cornell A. A Primer on Experiments with Mixtures

9879.47 руб.
The concise yet authoritative presentation of key techniques for basic mixtures experiments Inspired by the author's bestselling advanced book on the topic, A Primer on Experiments with Mixtures provides an introductory presentation of the key principles behind experimenting with mixtures. Outlining useful techniques through an applied approach with examples from real research situations, the book supplies a comprehensive discussion of how to design and set up basic mixture experiments, then analyze the data and draw inferences from results. Drawing from his extensive experience teaching the topic at various levels, the author presents the mixture experiments in an easy-to-follow manner that is void of unnecessary formulas and theory. Succinct presentations explore key methods and techniques for carrying out basic mixture experiments, including: Designs and models for exploring the entire simplex factor space, with coverage of simplex-lattice and simplex-centroid designs, canonical polynomials, the plotting of individual residuals, and axial designs Multiple constraints on the component proportions in the form of lower and/or upper bounds, introducing L-Pseudocomponents, multicomponent constraints, and multiple lattice designs for major and minor component classifications Techniques for analyzing mixture data such as model reduction and screening components, as well as additional topics such as measuring the leverage of certain design points Models containing ratios of the components, Cox's mixture polynomials, and the fitting of a slack variable model A review of least squares and the analysis of variance for fitting data Each chapter concludes with a summary and appendices with details on the technical aspects of the material. Throughout the book, exercise sets with selected answers allow readers to test their comprehension of the material, and References and Recommended Reading sections outline further resources for study of the presented topics. A Primer on Experiments with Mixtures is an excellent book for one-semester courses on mixture designs and can also serve as a supplement for design of experiments courses at the upper-undergraduate and graduate levels. It is also a suitable reference for practitioners and researchers who have an interest in experiments with mixtures and would like to learn more about the related mixture designs and models.
Printio I'm gonna crumb Printio I'm gonna crumb Новинка

Printio I'm gonna crumb

710 руб.
Майка классическая — цвет: БЕЛЫЙ, пол: ЖЕН.
Printio I'm gonna crumb Printio I'm gonna crumb Новинка

Printio I'm gonna crumb

507 руб.
Сумка.
Printio I'm gonna crumb Printio I'm gonna crumb Новинка

Printio I'm gonna crumb

1003 руб.
Лонгслив — цвет: БЕЛЫЙ, пол: МУЖ.
Xiaoniu Yang Semiconducting Polymer Composites. Principles, Morphologies, Properties and Applications Xiaoniu Yang Semiconducting Polymer Composites. Principles, Morphologies, Properties and Applications Новинка

Xiaoniu Yang Semiconducting Polymer Composites. Principles, Morphologies, Properties and Applications

2174.26 руб.
The first part of Semiconducting Polymer Composites describes the principles and concepts of semiconducting polymer composites in general, addressing electrical conductivity, energy alignment at interfaces, morphology, energy transfer, percolation theory and processing techniques. In later chapters, different types of polymer composites are discussed: mixtures of semiconducting and insulating or semiconducting and semiconducting components, respectively. These composites are suitable for a variety of applications that are presented in detail, including transistors and solar cells, sensors and detectors, diodes and lasers as well as anti-corrosive and anti-static surface coatings.
Maurizio Galimberti Rubber-Clay Nanocomposites. Science, Technology, and Applications Maurizio Galimberti Rubber-Clay Nanocomposites. Science, Technology, and Applications Новинка

Maurizio Galimberti Rubber-Clay Nanocomposites. Science, Technology, and Applications

12444.22 руб.
The one-stop resource for rubber-clay nanocomposite information The first comprehensive, single-volume book to compile all the most important data on rubber-clay nanocomposites in one place, Rubber-Clay Nanocomposites: Science, Technology, and Applications reviews rubber-clay nanocomposites in an easy-to-reference format designed for R&D professionals. Including contributions from experts from North America, Europe, and Asia, the book explores the properties of compounds with rubber-clay nanocomposites, including their rheology, curing kinetics, mechanical properties, and many others. Rubber-clay nanocomposites are of growing interest to the scientific and technological community, and have been shown to improve rubber compound reinforcement and impermeability. These natural mineral fillers are of potential interest for large-scale applications and are already making an impact in several major fields. Packed with valuable information about the synthesis, processing, and mechanics of these reinforced rubbers, the book covers assorted rubber-clay nanocomposites applications, such as in automotive tires and as polymer fillers. Promoting common knowledge and interpretation of the most important aspects of rubber-clay nanocomposites, and clarifying the main results achieved in the field of rubbers and crosslinked rubbers—something not covered in other books in the field—Rubber-Clay Nanocomposites helps scientists understand morphology, vulcanization, permeability, processing methods, and characterization factors quickly and easily.
Jostein Hellesland Reinforced Concrete Beams, Columns and Frames. Section and Slender Member Analysis Jostein Hellesland Reinforced Concrete Beams, Columns and Frames. Section and Slender Member Analysis Новинка

Jostein Hellesland Reinforced Concrete Beams, Columns and Frames. Section and Slender Member Analysis

11994.57 руб.
This book is focused on the theoretical and practical design of reinforced concrete beams, columns and frame structures. It is based on an analytical approach of designing normal reinforced concrete structural elements that are compatible with most international design rules, including for instance the European design rules – Eurocode 2 – for reinforced concrete structures. The book tries to distinguish between what belongs to the structural design philosophy of such structural elements (related to strength of materials arguments) and what belongs to the design rule aspects associated with specific characteristic data (for the material or loading parameters). A previous book, entitled Reinforced Concrete Beams, Columns and Frames – Mechanics and Design, deals with the fundamental aspects of the mechanics and design of reinforced concrete in general, both related to the Serviceability Limit State (SLS) and the Ultimate Limit State (ULS), whereas the current book deals with more advanced ULS aspects, along with instability and second-order analysis aspects. Some recent research results including the use of non-local mechanics are also presented. This book is aimed at Masters-level students, engineers, researchers and teachers in the field of reinforced concrete design. Most of the books in this area are very practical or code-oriented, whereas this book is more theoretically based, using rigorous mathematics and mechanics tools. Contents 1. Advanced Design at Ultimate Limit State (ULS). 2. Slender Compression Members – Mechanics and Design. 3. Approximate Analysis Methods. Appendix 1. Cardano’s Method. Appendix 2. Steel Reinforcement Table. About the Authors Jostein Hellesland has been Professor of Structural Mechanics at the University of Oslo, Norway since January 1988. His contribution to the field of stability has been recognized and magnified by many high-quality papers in famous international journals such as Engineering Structures, Thin-Walled Structures, Journal of Constructional Steel Research and Journal of Structural Engineering. Noël Challamel is Professor in Civil Engineering at UBS, University of South Brittany in France and chairman of the EMI-ASCE Stability committee. His contributions mainly concern the dynamics, stability and inelastic behavior of structural components, with special emphasis on Continuum Damage Mechanics (more than 70 publications in International peer-reviewed journals). Charles Casandjian was formerly Associate Professor at INSA (French National Institute of Applied Sciences), Rennes, France and the chairman of the course on reinforced concrete design. He has published work on the mechanics of concrete and is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX. Christophe Lanos is Professor in Civil Engineering at the University of Rennes 1 in France. He has mainly published work on the mechanics of concrete, as well as other related subjects. He is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX.
Maurizio Galimberti Rubber-Clay Nanocomposites. Science, Technology, and Applications Maurizio Galimberti Rubber-Clay Nanocomposites. Science, Technology, and Applications Новинка

Maurizio Galimberti Rubber-Clay Nanocomposites. Science, Technology, and Applications

12909.43 руб.
The one-stop resource for rubber-clay nanocomposite information The first comprehensive, single-volume book to compile all the most important data on rubber-clay nanocomposites in one place, Rubber-Clay Nanocomposites: Science, Technology, and Applications reviews rubber-clay nanocomposites in an easy-to-reference format designed for R&D professionals. Including contributions from experts from North America, Europe, and Asia, the book explores the properties of compounds with rubber-clay nanocomposites, including their rheology, curing kinetics, mechanical properties, and many others. Rubber-clay nanocomposites are of growing interest to the scientific and technological community, and have been shown to improve rubber compound reinforcement and impermeability. These natural mineral fillers are of potential interest for large-scale applications and are already making an impact in several major fields. Packed with valuable information about the synthesis, processing, and mechanics of these reinforced rubbers, the book covers assorted rubber-clay nanocomposites applications, such as in automotive tires and as polymer fillers. Promoting common knowledge and interpretation of the most important aspects of rubber-clay nanocomposites, and clarifying the main results achieved in the field of rubbers and crosslinked rubbers—something not covered in other books in the field—Rubber-Clay Nanocomposites helps scientists understand morphology, vulcanization, permeability, processing methods, and characterization factors quickly and easily.
Konrad Bergmeister Design of Fastenings for Use in Concrete. The CEN/TS 1992-4 Provisions Konrad Bergmeister Design of Fastenings for Use in Concrete. The CEN/TS 1992-4 Provisions Новинка

Konrad Bergmeister Design of Fastenings for Use in Concrete. The CEN/TS 1992-4 Provisions

5624.83 руб.
The European pre-standard CEN/TS 1992-4 for the design of fastenings by means of headed studs, anchor channels as well as post-installed mechanical and chemical anchors is ready for use. The background and interpretation of the provisions related to the determination of actions and resistances based on limit state design, durability, fire resistance, fatigue and earthquake actions as required by CEN/TS 1992 are described in detail. Selected chapters from the German concrete yearbook are now being published in the new English «Beton-Kalender Series» for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn «Beton-Kalender» has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in «ferro-concrete» structures until – as the book's first editor, Fritz von Emperger (1862-1942), expressed it – the «tempestuous development» in this form of construction came to an end. However, the «Beton-Kalender» quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since.
Günter Rombach Spannbetonbau Günter Rombach Spannbetonbau Новинка

Günter Rombach Spannbetonbau

6028.81 руб.
Prestressing increases the load-bearing capacity of reinforced concrete structures significantly and also improves their serviceability. Long span bridges, very slender stressed ribbon or large shell structures as well as tall liquid containers would not be possible without prestressing or at the very least very uneconomical. Aside from the traditional fields of application in bridge and precast construction, prestressing is increasingly being used in buildings and industrial structures. Thus, any structural engineer should possess sufficient know-how in prestressed concrete construction to which this book aims to contribute. This book comprehensively elucidates the design and construction of prestressed concrete structures and illustrates the various prestressing methods and systems. All the necessary background knowledge is provided for the design and construction of safe and durable prestressed concrete structures. The numerous innovations of the last few years in analysing and detailing prestressed concrete structures as well as in the prestressing systems themselves required an update from the first edition of this book. This edition also incorporates the recent changes in the codes DIN 1045-1 and DIN-Fachbericht 102 as well as suggestions from practical experience.
Printio I'm gonna crumb Printio I'm gonna crumb Новинка

Printio I'm gonna crumb

780 руб.
Футболка классическая — цвет: БЕЛЫЙ, пол: ЖЕН.
Konrad Zilch Strengthening of Concrete Structures with Adhesive Bonded Reinforcement. Design and Dimensioning of CFRP Laminates and Steel Plates Konrad Zilch Strengthening of Concrete Structures with Adhesive Bonded Reinforcement. Design and Dimensioning of CFRP Laminates and Steel Plates Новинка

Konrad Zilch Strengthening of Concrete Structures with Adhesive Bonded Reinforcement. Design and Dimensioning of CFRP Laminates and Steel Plates

3373.76 руб.
Design and construction in existing contexts is becoming increasingly important, and often the structures – sometimes of historical interest – can be preserved easily and at minimum cost by employing strengthening measures. Existing concrete members can be strengthened by using adhesives to bond additional reinforcing elements onto or into those members. This book explains the design rules, together with their background, and uses examples to illustrate their use, specifically for slabs, beams and columns. Concrete member strengthening measures can take the form of, for example, flexural strengthening with externally bonded (surface-mounted) CFRP strips, CF sheets and steel plates, flexural strengthening with CFRP strips bonded in slits (near-surface-mounted reinforcement), shear strengthening with externally bonded CF sheets and steel plates, and column strengthening with CF sheets as confining reinforcement. The explanations and background information provided are mainly based on the new German guideline «Strengthening of Concrete Members with Adhesively Bonded Reinforcement» by the German Committee for Structural Concrete (DAfStb). This is the first European guideline to regulate this topic in the form of a supplement to the Eurocode. As it is planned to produce a document in a future Eurocode 2, the DAfStb guideline serves as a starting point. The authors are extensively involved in the planning, design, operation and inspection of buildings for preservation and reconstruction, and in the updating of European Technical Approval Guidelines (ETAGs) and design rules. Selected chapters from the German concrete yearbook are now being published in the new English «Beton-Kalender Series» for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn «Beton-Kalender» has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in «ferro-concrete» structures until – as the book's first editor, Fritz von Emperger (1862-1942), expressed it – the «tempestuous development» in this form of construction came to an end. However, the «Beton-Kalender» quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since.
Printio I'm gonna crumb Printio I'm gonna crumb Новинка

Printio I'm gonna crumb

710 руб.
Майка классическая — цвет: БЕЛЫЙ, пол: МУЖ.
Printio I'm gonna crumb Printio I'm gonna crumb Новинка

Printio I'm gonna crumb

872 руб.
Футболка Wearcraft Premium — цвет: БЕЛЫЙ, пол: ЖЕН.
Thilo Pregartner Bemessung von Befestigungen in Beton. Einführung mit Beispielen Thilo Pregartner Bemessung von Befestigungen in Beton. Einführung mit Beispielen Новинка

Thilo Pregartner Bemessung von Befestigungen in Beton. Einführung mit Beispielen

4610.29 руб.
The design of fixings in concrete is in practice almost exclusively performed with programs provided by manufacturers. For the interpretation of the results and to deal with any application case, this book offers explanations about the design procedure.
Konrad Bergmeister Beton-Kalender 2009. Schwerpunkte: Konstruktiver Hochbau - Aktuelle Massivbaunormen Konrad Bergmeister Beton-Kalender 2009. Schwerpunkte: Konstruktiver Hochbau - Aktuelle Massivbaunormen Новинка

Konrad Bergmeister Beton-Kalender 2009. Schwerpunkte: Konstruktiver Hochbau - Aktuelle Massivbaunormen

10795.04 руб.
The main themes of this issue are the structural design of building frames and the current state of standards for mass wall structures around DIN 1045. Also in this year's issue: – structural design in existing buildings, – concrete as a building material.
S. Sridhar Membrane Processes. Pervaporation, Vapor Permeation and Membrane Distillation for Industrial Scale Separations S. Sridhar Membrane Processes. Pervaporation, Vapor Permeation and Membrane Distillation for Industrial Scale Separations Новинка

S. Sridhar Membrane Processes. Pervaporation, Vapor Permeation and Membrane Distillation for Industrial Scale Separations

23243.97 руб.
Separation processes are challenging steps in any process industry for isolation of products and recycling of reactants. Membrane technology has shown immense potential in separation of liquid and gaseous mixtures, effluent treatment, drinking water purification and solvent recovery. It has found endless popularity and wide acceptance for its small footprint, higher selectivity, scalability, energy saving capability and inherent ease of integration into other unit operations. There are many situations where the target component cannot be separated by distillation, liquid extraction, and evaporation. The different membrane processes such as pervaporation, vapor permeation and membrane distillation could be used for solving such industrial bottlenecks. This book covers the entire array of fundamental aspects, membrane synthesis and applications in the chemical process industries (CPI). It also includes various applications of pervaporation, vapor permeation and membrane distillation in industrially and socially relevant problems including separation of azeotropic mixtures, close-boiling compounds, organic–organic mixtures, effluent treatment along with brackish and seawater desalination, and many others. These processes can also be applied for extraction of small quantities of value-added compounds such as flavors and fragrances and selective removal of hazardous impurities, viz., volatile organic compounds (VOCs) such as vinyl chloride, benzene, ethyl benzene and toluene from industrial effluents. Including case studies, this is a must-have for any process or chemical engineer working in the industry today. Also valuable as a learning tool, students and professors in chemical engineering, chemistry, and process engineering will benefit greatly from the groundbreaking new processes and technologies described in the volume.
Alain Sellier Swelling Concrete in Dams and Hydraulic Structures. DSC 2017 Alain Sellier Swelling Concrete in Dams and Hydraulic Structures. DSC 2017 Новинка

Alain Sellier Swelling Concrete in Dams and Hydraulic Structures. DSC 2017

10873.3 руб.
The swelling of concrete is a major concern for the owners and operators of dams and hydraulic structures. Faced with irreversible movement of their dams or with observations of cracking processes, operators need to explain the phenomena observed in order to justify safety conditions and in some cases to plan remedial works. Over the last 20 years, active research has been carried out in the field, resulting in practical results in phenomena interpretation and dam modeling. At the same time, an increasing number of affected dams have undergone safety re-evaluations and in some cases remedial work. Several of them have been removed altogether. Although it remains difficult to establish a “state of the art” in this domain due to the rapidly changing context, regular international exchanges in the field appear fruitful and necessary. Following on from previous conferences in the field organized by Robin Charlwood, former President of the ICOLD Concrete Committee, the initiative was taken by EDF and Toulouse University-LMDC to organize a workshop to provide a new opportunity for sharing experience. The aim of this workshop is to assemble active researchers, leading engineers, and experts from the practicing community and administration interested directly or indirectly in concrete swelling effects in dams and hydraulic structures. All types of chemical expansion phenomena, including those due to alkali aggregate reactions and those due to ettringite formation, are addressed. These proceedings include 24 papers written by experts renowned in their field, illustrating the need to progress with interdisciplinary approaches.
Otl Aicher Analogous and Digital Otl Aicher Analogous and Digital Новинка

Otl Aicher Analogous and Digital

2696.45 руб.
Otl Aicher (1922-1991) was an outstanding personality in modern design, he was a co-founder of the legendary Hochschule fur Gestaltung (HfG), the Ulm School of Design, Germany. His works since the fifties of the last century in the field of corporate design and his pictograms for the 1972 Summer Olympics in Munich are major achievements in the visual communication of our times. «An integral component of Aicher's work is that it is anchored in a „philosophy of making“ inspired by such thinkers as Ockham, Kant or Wittgenstein, a philosophy concerned with the prerequisites and aims, the objects and claims, of design. Aicher's complete theoretical and practical writings on design (which include all other aspects of visual creativity, such as architecture) are available with this new edition of the classic work. If Aicher prefers the analogous and concrete to the digital and abstract he does it with a philosophical intention. He relativizes the role of pure reason. He criticizes the rationality of Modernism as a result of the dominance of purely abstract thinking. Anyone who prefers the abstract to the concrete does not only misunderstand the mutual dependence of concept and view. In Aicher's judgement he is also creating a false hierarchy, a rank order that is culturally fatal. Things that are digital and abstract are not greater, higher and more important than things that are analogous and concrete.» Wilhelm Vossenkuhl
Г. Е. Бесстремянная Measuring income equity in the demand for healthcare with finite mixture models Г. Е. Бесстремянная Measuring income equity in the demand for healthcare with finite mixture models Новинка

Г. Е. Бесстремянная Measuring income equity in the demand for healthcare with finite mixture models

152 руб.
The paper exploits panel data finite mixture (latent class) models to measure consumer equity in healthcare access and utilization. The finite mixture approach accounts for unobservable consumer heterogeneity, while generalized linear models address a retransformation problem of logged dependent variable. Using the data of the Japan Household Panel Survey (2009–2014), we discover that consumers separate into latent classes in the binary choice models for healthcare use and generalized linear models for outpatient/inpatient healthcare expenditure. The results reveal that healthcare access in Japan is pro-poor for the most sick consumers, while utilization of outpatient care is equitable with respect to disposable income.
Ahmed Loukili Self Compacting Concrete Ahmed Loukili Self Compacting Concrete Новинка

Ahmed Loukili Self Compacting Concrete

10812.96 руб.
Self-Compacting Concrete (SCC) is a relatively new building material. Nowadays, its use is progressively changing the method of concrete placement on building sites. However, the successful use of SCC requires a good understanding of the behavior of this material, which is vastly different from traditional concrete. For this purpose, a lot of research has been conducted on this area all over the world since 10 years. Intended for both practitioners and scientists, this book provides research results from the rheological behavior of fresh concrete to durability.
J. G. Ballard Concrete Island J. G. Ballard Concrete Island Новинка

J. G. Ballard Concrete Island

771.94 руб.
Robert Maitland, a 35 year-old architect, is driving home from his London offices when a blow-out sends his speeding Jaguar hurtling out of control. Smashing through a temporary barrier he finds himself, dazed and disorientated, on a traffic island below three converging motorways. But when he tries to climb the embankment or flag-down a passing car for help it proves impossible – and he finds himself imprisoned on the concrete island. In this twisted version of ‘Robinson Crusoe’, Maitland must learn to survive – using only what he can find in his crashed car.As in all Ballard’s best work ‘Concrete Island’ provides an unnerving study of our modern lives and world. With his alienating ‘Ballardian’ view of normal events, this is a unique novel from one of our finest writers.
Robert Crumb: Sketchbook Robert Crumb: Sketchbook Новинка

Robert Crumb: Sketchbook

3340 руб.
More from the Crumb tray The second volume from America's most controversial cartoonist It's the old story. When TASCHEN released the first limited edition of R....
Visakh M. P. Polyethylene-Based Blends, Composites and Nanocomposities Visakh M. P. Polyethylene-Based Blends, Composites and Nanocomposities Новинка

Visakh M. P. Polyethylene-Based Blends, Composites and Nanocomposities

14623.43 руб.
The book focusses on the recent technical research accomplishments in the area of polyethylene-based blends, composites and nanocomposites by looking at the various aspects of processing, morphology, properties and applications. In particular, the book details the important developments in areas such as the structure-properties relationship of polyethylene; modification of polyethylene with radiation and ion implantation processes; stabilization of irradiated polyethylene by the introduction of antioxidants; reinforcement of polyethylene through carbon-based materials as additives; characterization of carbon-based polyethylenes composites, polyethylene-based blends with thermoplastic and thermoset; characterization of polyethylene-based thermoplastic and thermoset blends; polyethylene-based blends with natural rubber and synthetic rubber; characterization of polyethylene-based natural rubber and synthetic rubber blends; characterization of polyethylene-based composites.
Printio I'm gonna crumb Printio I'm gonna crumb Новинка

Printio I'm gonna crumb

872 руб.
Футболка Wearcraft Premium Slim Fit — цвет: БЕЛЫЙ, пол: МУЖ.
Stephan Freudenstein Ballastless Tracks Stephan Freudenstein Ballastless Tracks Новинка

Stephan Freudenstein Ballastless Tracks

3585.78 руб.
Due to increasing traffic flows the extension of transport infrastructure with rail roads and high speed lines is an ongoing process worldwide. Ballastless track systems with concrete slabs are used more and more. Following the first trials in the 1970s and more than four decades of R&D work on ballastless track, the level of development is such that it can be confirmed that ballastless track is suitable for use as an alternative to ballasted track. This book makes a contribution to the state of the art of ballastless track by describing the basics for designing the ballastless track. Important advice is provided regarding the construction of ballastless track on earthworks and in tunnels. There is also a description of the technical history of the development of ballastless track on bridges and the ensuing findings for bridge design. The state of the art of ballastless track for switches, important information on details concerning drainage, transitions, accessibility for road vehicles and experience gleaned from maintenance round off the work. Selected chapters from the German concrete yearbook are now being published in the new English «Beton-Kalender Series» for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn «Beton-Kalender» has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in «ferro-concrete» structures until – as the book's first editor, Fritz von Emperger (1862-1942), expressed it – the «tempestuous development» in this form of construction came to an end. However, the «Beton-Kalender» quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since.
Egbert Boeker Environmental Physics. Sustainable Energy and Climate Change Egbert Boeker Environmental Physics. Sustainable Energy and Climate Change Новинка

Egbert Boeker Environmental Physics. Sustainable Energy and Climate Change

15068.81 руб.
This thoroughly revised and updated third edition focuses on the utilization of sustainable energy and mitigating climate change, serving as an introduction to physics in the context of societal problems. A distinguishing feature of the text is the discussion of spectroscopy and spectroscopic methods as a crucial means to quantitatively analyze and monitor the condition of the environment, the factors determining climate change, and all aspects of energy conversion. This textbook will be invaluable to students in physics and related subjects, and supplementary materials are available on a companion website.

кешбака
Страницы:


This book is focused on the theoretical and practical design of reinforced concrete beams, columns and frame structures. It is based on an analytical approach of designing normal reinforced concrete structural elements that are compatible with most international design rules, including for instance the European design rules – Eurocode 2 – for reinforced concrete structures. The book tries to distinguish between what belongs to the structural design philosophy of such structural elements (related to strength of materials arguments) and what belongs to the design rule aspects associated with specific characteristic data (for the material or loading parameters). Reinforced Concrete Beams, Columns and Frames – Mechanics and Design deals with the fundamental aspects of the mechanics and design of reinforced concrete in general, both related to the Serviceability Limit State (SLS) and the Ultimate Limit State (ULS). A second book, entitled Reinforced Concrete Beams, Columns and Frames – Section and Slender Member Analysis, deals with more advanced ULS aspects, along with instability and second-order analysis aspects. Some recent research results including the use of non-local mechanics are also presented. This book is aimed at Masters-level students, engineers, researchers and teachers in the field of reinforced concrete design. Most of the books in this area are very practical or code-oriented, whereas this book is more theoretically based, using rigorous mathematics and mechanics tools. Contents 1. Design at Serviceability Limit State (SLS). 2. Verification at Serviceability Limit State (SLS). 3. Concepts for the Design at Ultimate Limit State (ULS). 4. Bending-Curvature at Ultimate Limit State (ULS). Appendix 1. Cardano’s Method. Appendix 2. Steel Reinforcement Table. About the Authors Charles Casandjian was formerly Associate Professor at INSA (French National Institute of Applied Sciences), Rennes, France and the chairman of the course on reinforced concrete design. He has published work on the mechanics of concrete and is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX. Noël Challamel is Professor in Civil Engineering at UBS, University of South Brittany in France and chairman of the EMI-ASCE Stability committee. His contributions mainly concern the dynamics, stability and inelastic behavior of structural components, with special emphasis on Continuum Damage Mechanics (more than 70 publications in International peer-reviewed journals). Christophe Lanos is Professor in Civil Engineering at the University of Rennes 1 in France. He has mainly published work on the mechanics of concrete, as well as other related subjects. He is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX. Jostein Hellesland has been Professor of Structural Mechanics at the University of Oslo, Norway since January 1988. His contribution to the field of stability has been recognized and magnified by many high-quality papers in famous international journals such as Engineering Structures, Thin-Walled Structures, Journal of Constructional Steel Research and Journal of Structural Engineering.
Продажа utilization of crumb rubber modifier in asphalt concrete mixtures лучших цены всего мира
Посредством этого сайта магазина - каталога товаров мы очень легко осуществляем продажу utilization of crumb rubber modifier in asphalt concrete mixtures у одного из интернет-магазинов проверенных фирм. Определитесь с вашими предпочтениями один интернет-магазин, с лучшей ценой продукта. Прочитав рекомендации по продаже utilization of crumb rubber modifier in asphalt concrete mixtures легко охарактеризовать производителя как превосходную и доступную фирму.