yang leng materials characterization introduction to microscopic and spectroscopic methods



Yang Leng Materials Characterization. Introduction to Microscopic and Spectroscopic Methods Yang Leng Materials Characterization. Introduction to Microscopic and Spectroscopic Methods Новинка

Yang Leng Materials Characterization. Introduction to Microscopic and Spectroscopic Methods

10145.61 руб.
Now in its second edition, this continues to serve as an ideal textbook for introductory courses on materials characterization, based on the author's experience in teaching advanced undergraduate and postgraduate university students. The new edition retains the successful didactical concept of introductions at the beginning of chapters, exercise questions and an online solution manual. In addition, all the sections have been thoroughly revised, updated and expanded, with two major new topics (electron backscattering diffraction and environmental scanning electron microscopy), as well as fifty additional questions – in total about 20% new content. The first part covers commonly used methods for microstructure analysis, including light microscopy, X-ray diffraction, transmission and scanning electron microscopy, as well as scanning probe microscopy. The second part of the book is concerned with techniques for chemical analysis and introduces X-ray energy dispersive spectroscopy, fluorescence X-ray spectroscopy and such popular surface analysis techniques as photoelectron and secondary ion mass spectroscopy. This section concludes with the two most important vibrational spectroscopies (infra-red and Raman) and the increasingly important thermal analysis. The theoretical concepts are discussed with a minimal involvement of mathematics and physics, and the technical aspects are presented with the actual measurement practice in mind. Making for an easy-to-read text, the book never loses sight of its intended audience.
Ratna Tantra Nanomaterial Characterization. An Introduction Ratna Tantra Nanomaterial Characterization. An Introduction Новинка

Ratna Tantra Nanomaterial Characterization. An Introduction

9788.54 руб.
Introduces basic knowledge for nanomaterial characterization focusing on key properties and the different analytical techniques available Provides a quick reference to different analytical methods for a given property highlighting their pros and cons Presents numerous case studies, ranging from characterizing nanomaterials in coffee creamer suspension to measurement of airborne dust exposure levels Provides an introduction to other topics that are strongly related to nanomaterial characterization e.g. synthesis, reference material and metrology Includes state of the art techniques: scanning tunneling microscopy under extreme conditions, novel strategy for biological characterization and methods to visualize multidimensional characterization data
Jiann-Yang Hwang Characterization of Minerals, Metals and Materials Jiann-Yang Hwang Characterization of Minerals, Metals and Materials Новинка

Jiann-Yang Hwang Characterization of Minerals, Metals and Materials

12525.61 руб.
This state-of-the-art reference contains chapters on all aspects of the characterization of minerals, metals, and materials. The title presents papers from one of the largest yearly gatherings of materials scientists in the world and thoroughly discusses the characterization of minerals, metals, and materials The scope includes current industrial applications and research and developments in the following areas: • Characterization of Ferrous Metals • Characterization of Non-Ferrous Materials • Characterization of Minerals and Ceramics • Characterization Technologies • Characterization of Environmental and Construction Materials • Characterization of Energy, Electronic and Optical Materials • Characterization of Carbon and Soft Materials • Characterization of Light Metals An excellent reference for global extractive and process metallurgy industries, materials scientists and engineers, metallurgists, and mechanical engineers.
Jian Li Characterization of Minerals, Metals, and Materials 2015 Jian Li Characterization of Minerals, Metals, and Materials 2015 Новинка

Jian Li Characterization of Minerals, Metals, and Materials 2015

14174.25 руб.
This collection of proceedings focuses on the characterization of minerals, metals, and materials as well as the application of characterization results on the processing of these materials. Papers cover topics such as clays, ceramics, composites, ferrous metals, non-ferrous metals, minerals, electronic materials, magnetic materials, environmental materials, advanced materials, and soft materials. In addition, papers covering materials extraction, materials processing, corrosion, welding, solidification, and method development are included. This book provides a current snapshot of characterization in materials science and its role in validating, informing, and driving current theories in the field of materials science. This proceedings volume will serve the dual purpose of furnishing a broad introduction of the field to novices while simultaneously serving to keep subject matter experts up-to-date.
Helmut Clemens Neutrons and Synchrotron Radiation in Engineering Materials Science. From Fundamentals to Applications Helmut Clemens Neutrons and Synchrotron Radiation in Engineering Materials Science. From Fundamentals to Applications Новинка

Helmut Clemens Neutrons and Synchrotron Radiation in Engineering Materials Science. From Fundamentals to Applications

14095.49 руб.
Retaining its proven concept, the second edition of this ready reference specifically addresses the need of materials engineers for reliable, detailed information on modern material characterization methods. As such, it provides a systematic overview of the increasingly important field of characterization of engineering materials with the help of neutrons and synchrotron radiation. The first part introduces readers to the fundamentals of structure-property relationships in materials and the radiation sources suitable for materials characterization. The second part then focuses on such characterization techniques as diffraction and scattering methods, as well as direct imaging and tomography. The third part presents new and emerging methods of materials characterization in the field of 3D characterization techniques like three-dimensional X-ray diffraction microscopy. The fourth and final part is a collection of examples that demonstrate the application of the methods introduced in the first parts to problems in materials science. With thoroughly revised and updated chapters and now containing about 20% new material, this is the must-have, in-depth resource on this highly relevant topic.
Ashutosh Shukla K. Analytical Characterization Methods for Crude Oil and Related Products Ashutosh Shukla K. Analytical Characterization Methods for Crude Oil and Related Products Новинка

Ashutosh Shukla K. Analytical Characterization Methods for Crude Oil and Related Products

12137.79 руб.
Basic theory, applications, and recent trends in analytical techniques used in crude oil and related products analysis This book covers the application of different spectroscopic methods to characterize crude oil and related products. Its topics are presented in a pedagogical manner so that those new to the subject can better understand the content. The book begins by familiarizing the reader with the rheological characterization of crude oil and related products. Subsequent chapters are directed towards the current trends of different spectroscopic methods for the characterization of crude oil. Analytical Characterization Methods for Crude Oil and Related Products features chapters on: optical interrogation of petroleum asphaltenes (myths and reality); ESR characterization of organic free radicals in petroleum products; high-field, pulsed, and double resonance studies of crude oils and their derivatives; NMR spectroscopy in bitumen characterization; applications of Raman spectroscopy in crude oil and bitumen characterization; and more. Uses a bottom-up approach—starting from the basic theory of the technique followed by its applications and recent trends in crude oil analysis Includes informative content so as to take a technician to the level of using a particular analytical method Covers relevany information so as to enable a manager in the industry to make purchasing decisions Analytical Characterization Methods for Crude Oil and Related Products is aimed at researchers in academia as well as technicians and developers of new analytical methods in the oil industry and related areas. It will also be of interest to professionals, scientists, and graduate students in analytical sciences dealing with oil and environmental analysis.
Jian Li Characterization of Minerals, Metals, and Materials 2016 Jian Li Characterization of Minerals, Metals, and Materials 2016 Новинка

Jian Li Characterization of Minerals, Metals, and Materials 2016

19573.36 руб.
Characterization is an important and fundamental step in material research before and after processing. This bookfocuses on the characterization of minerals, metals, and materials as well as the application of characterization results on the processing of these materials. It is a highly authoritative collection of articles written by experts from around the world. The articles center on materials characterization, extraction, processing, corrosion, welding, solidification, and method development. In addition, articles focus on clays, ceramics, composites, ferrous metals, non-ferrous metals, minerals, electronic, magnetic, environmental, advanced and soft materials. This book will serve the dual purpose of furnishing a broad introduction of the field to novices while simultaneously serving to keep subject matter experts up-to-date.
Jiann-Yang Hwang Characterization of Minerals, Metals, and Materials 2014 Jiann-Yang Hwang Characterization of Minerals, Metals, and Materials 2014 Новинка

Jiann-Yang Hwang Characterization of Minerals, Metals, and Materials 2014

12525.61 руб.
This collection focuses on the characterization of minerals, metals, and materials as well as the application of characterization results on the processing of these materials. Focused sessions within the symposia include those centered on ferrous metals, non-ferrous metals, soft materials, ceramics, clays, composites, and minerals. In addition, sessions will focus exclusively on characterization concerns in the extraction, processing, and environmental application of materials. Finally, method development in characterization will be explored.
Uwe Rau Advanced Characterization Techniques for Thin Film Solar Cells Uwe Rau Advanced Characterization Techniques for Thin Film Solar Cells Новинка

Uwe Rau Advanced Characterization Techniques for Thin Film Solar Cells

16053.2 руб.
The book focuses on advanced characterization methods for thin-film solar cells that have proven their relevance both for academic and corporate photovoltaic research and development. After an introduction to thin-film photovoltaics, highly experienced experts report on device and materials characterization methods such as electroluminescence analysis, capacitance spectroscopy, and various microscopy methods. In the final part of the book simulation techniques are presented which are used for ab-initio calculations of relevant semiconductors and for device simulations in 1D, 2D and 3D. Building on a proven concept, this new edition also covers thermography, transient optoelectronic methods, and absorption and photocurrent spectroscopy.
Egbert Boeker Environmental Physics. Sustainable Energy and Climate Change Egbert Boeker Environmental Physics. Sustainable Energy and Climate Change Новинка

Egbert Boeker Environmental Physics. Sustainable Energy and Climate Change

15735.96 руб.
This thoroughly revised and updated third edition focuses on the utilization of sustainable energy and mitigating climate change, serving as an introduction to physics in the context of societal problems. A distinguishing feature of the text is the discussion of spectroscopy and spectroscopic methods as a crucial means to quantitatively analyze and monitor the condition of the environment, the factors determining climate change, and all aspects of energy conversion. This textbook will be invaluable to students in physics and related subjects, and supplementary materials are available on a companion website.
Jiann-Yang Hwang Characterization of Minerals, Metals, and Materials 2013 Jiann-Yang Hwang Characterization of Minerals, Metals, and Materials 2013 Новинка

Jiann-Yang Hwang Characterization of Minerals, Metals, and Materials 2013

12525.61 руб.
This collection of proceedings from one of the most popular TMS symposia explores the current progress in the characterization of materials. Addressing technologies, applications, and innovative research, these papers cover definations of ferrous and nonferrous metals and alloys, minerals, advanced and soft materials, and inorganic materials. Extraction and environmental applications, as well as surface, joint, and processing of metals. This is a valuable reference for scientists and engineers working with materials in the minerals, metals, and materials industry.
David Levy Transparent Conductive Materials. From Materials via Synthesis and Characterization to Applications David Levy Transparent Conductive Materials. From Materials via Synthesis and Characterization to Applications Новинка

David Levy Transparent Conductive Materials. From Materials via Synthesis and Characterization to Applications

13435.72 руб.
Edited by well-known pioneers in the field, this handbook and ready reference provides a comprehensive overview of transparent conductive materials with a strong application focus. Following an introduction to the materials and recent developments, subsequent chapters discuss the synthesis and characterization as well as the deposition techniques that are commonly used for energy harvesting and light emitting applications. Finally, the book concludes with a look at future technological advances. All-encompassing and up-to-date, this interdisciplinary text runs the gamut from chemistry and materials science to engineering, from academia to industry, and from fundamental challenges to readily available applications.
Kanishka Biswas Essentials of Inorganic Materials Synthesis Kanishka Biswas Essentials of Inorganic Materials Synthesis Новинка

Kanishka Biswas Essentials of Inorganic Materials Synthesis

7827.12 руб.
This compact handbook describes all the important methods of synthesis employed today for synthesizing inorganic materials. Some features: Focuses on modern inorganic materials with applications in nanotechnology, energy materials, and sustainability Synthesis is a crucial component of materials science and technology; this book provides a simple introduction as well as an updated description of methods Written in a very simple style, providing references to the literature to get details of the methods of preparation when required
Richard Catlow Computational Approaches to Energy Materials Richard Catlow Computational Approaches to Energy Materials Новинка

Richard Catlow Computational Approaches to Energy Materials

14956.59 руб.
The development of materials for clean and efficient energy generation and storage is one of the most rapidly developing, multi-disciplinary areas of contemporary science, driven primarily by concerns over global warming, diminishing fossil-fuel reserves, the need for energy security, and increasing consumer demand for portable electronics. Computational methods are now an integral and indispensable part of the materials characterisation and development process. Computational Approaches to Energy Materials presents a detailed survey of current computational techniques for the development and optimization of energy materials, outlining their strengths, limitations, and future applications. The review of techniques includes current methodologies based on electronic structure, interatomic potential and hybrid methods. The methodological components are integrated into a comprehensive survey of applications, addressing the major themes in energy research. Topics covered include: • Introduction to computational methods and approaches • Modelling materials for energy generation applications: solar energy and nuclear energy • Modelling materials for storage applications: batteries and hydrogen • Modelling materials for energy conversion applications: fuel cells, heterogeneous catalysis and solid-state lighting • Nanostructures for energy applications This full colour text is an accessible introduction for newcomers to the field, and a valuable reference source for experienced researchers working on computational techniques and their application to energy materials.
Razvan Mezei A. An Introduction to SAGE Programming. With Applications to SAGE Interacts for Numerical Methods Razvan Mezei A. An Introduction to SAGE Programming. With Applications to SAGE Interacts for Numerical Methods Новинка

Razvan Mezei A. An Introduction to SAGE Programming. With Applications to SAGE Interacts for Numerical Methods

5869.41 руб.
Features a simplified presentation of numerical methods by introducing and implementing SAGE programs An Introduction to SAGE Programming: With Applications to SAGE Interacts for Numerical Methods emphasizes how to implement numerical methods using SAGE Math and SAGE Interacts and also addresses the fundamentals of computer programming, including if statements, loops, functions, and interacts. The book also provides a unique introduction to SAGE and its computer algebra system capabilities; discusses second and higher order equations and estimate limits; and determines derivatives, integrals, and summations. Providing critical resources for developing successful interactive SAGE numerical computations, the book is accessible without delving into the mathematical rigor of numerical methods. The author illustrates the benefits of utilizing the SAGE language for calculus and the numerical analysis of various methods such as bisection methods, numerical integration, Taylor’s expansions, and Newton’s iterations. Providing an introduction to the terminology and concepts involved, An Introduction to SAGE Programming: With Applications to SAGE Interacts for Numerical Methods also features: An introduction to computer programming using SAGE Many practical examples throughout to illustrate the application of SAGE Interacts for various numerical methods Discussions on how to use SAGE Interacts and SAGE Cloud in order to create mathematical demonstrations Numerous homework problems and exercises that allow readers to practice their programming skillset A companion website that includes related SAGE programming code and select solutions to the homework problems and exercises An Introduction to SAGE Programming: With Applications to SAGE Interacts for Numerical Methods is an ideal reference for applied mathematicians who need to employ SAGE for the study of numerical methods and analysis. The book is also an appropriate supplemental textbook for upper-undergraduate and graduate-level courses in numerical methods.
Shaw Christopher Materials and Methods in ELT Shaw Christopher Materials and Methods in ELT Новинка

Shaw Christopher Materials and Methods in ELT

4321.71 руб.
Materials and Methods in ELT is an essential resource for teachers or for those engaged in taking professional courses relating to all aspects of English language teaching. Now available in its 3rd edition, this popular teachers’ guide offers a comprehensive and useful introduction to the principles and practice of teaching English as a foreign/second language. It examines the ideas behind current methodology and teaching materials, in addition to offering a practical guide to approaching materials and methods, evaluation and adaptation, technology for materials and methods, and teaching in under-resourced classrooms. These principles are then related to the individual language skills of reading, listening, speaking, and writing. The authors examine the different methodologies available to teachers for organizing and running an ELT classroom; discussing group and pair work, individualization, classroom observation, and the teachers’ role in the contemporary ELT context. Updated throughout, the 3rd edition features a new section on technology for materials and methods, as well as a new chapter on IT in English language teaching, and inclusion of new samples from current teaching materials.
Michael Chernick R. An Introduction to Bootstrap Methods with Applications to R Michael Chernick R. An Introduction to Bootstrap Methods with Applications to R Новинка

Michael Chernick R. An Introduction to Bootstrap Methods with Applications to R

9240.97 руб.
A comprehensive introduction to bootstrap methods in the R programming environment Bootstrap methods provide a powerful approach to statistical data analysis, as they have more general applications than standard parametric methods. An Introduction to Bootstrap Methods with Applications to R explores the practicality of this approach and successfully utilizes R to illustrate applications for the bootstrap and other resampling methods. This book provides a modern introduction to bootstrap methods for readers who do not have an extensive background in advanced mathematics. Emphasis throughout is on the use of bootstrap methods as an exploratory tool, including its value in variable selection and other modeling environments. The authors begin with a description of bootstrap methods and its relationship to other resampling methods, along with an overview of the wide variety of applications of the approach. Subsequent chapters offer coverage of improved confidence set estimation, estimation of error rates in discriminant analysis, and applications to a wide variety of hypothesis testing and estimation problems, including pharmaceutical, genomics, and economics. To inform readers on the limitations of the method, the book also exhibits counterexamples to the consistency of bootstrap methods. An introduction to R programming provides the needed preparation to work with the numerous exercises and applications presented throughout the book. A related website houses the book's R subroutines, and an extensive listing of references provides resources for further study. Discussing the topic at a remarkably practical and accessible level, An Introduction to Bootstrap Methods with Applications to R is an excellent book for introductory courses on bootstrap and resampling methods at the upper-undergraduate and graduate levels. It also serves as an insightful reference for practitioners working with data in engineering, medicine, and the social sciences who would like to acquire a basic understanding of bootstrap methods.
Sabu Thomas Advanced Materials for Electromagnetic Shielding. Fundamentals, Properties, and Applications Sabu Thomas Advanced Materials for Electromagnetic Shielding. Fundamentals, Properties, and Applications Новинка

Sabu Thomas Advanced Materials for Electromagnetic Shielding. Fundamentals, Properties, and Applications

14746.52 руб.
A comprehensive review of the field of materials that shield people and sensitive electronic devices from electromagnetic fields Advanced Materials for Electromagnetic Shielding offers a thorough review of the most recent advances in the processing and characterization of the electromagnetic shielding materials. In this groundbreaking book, the authors—noted experts in the field—discuss the fundamentals of shielding theory as well as the practice of electromagnetic field measuring techniques and systems. They also explore applications of shielding materials used as absorbers of electromagnetic radiation, or as magnetic shields and explore coverage of new advanced materials for EMI shielding in aerospace applications. In addition, the text contains methods of preparation and applicability of metal foams. This comprehensive text examines the influence of technology on the micro-and macrostructure of polymers enabling their use in screening technology, technologies of shielding materials based on textiles, and analyses of its effectiveness in screening. The book also details the method of producing nanowires and their applications in EM shielding. This important resource: Explores the burgeoning market of electromagnetic shielding materials as we create, depend upon, and are exposed to more electronic devices than ever Addresses the most comprehensive issues relating to electromagnetic fields Contains information on the manufacturing, characterization methods, and properties of materials used to protect against them Discusses the important characterization techniques compared with one another, thus allowing scientists to select the best approach to a problem Written for materials scientists, electrical and electronics engineers, physicists, and industrial researchers, Advanced Materials for Electromagnetic Shielding explores all aspects in the area of electromagnetic shielding materials and examines the current state-of-the-art and new challenges in this rapidly growing area.
Yuan Lin Advanced Nano Deposition Methods Yuan Lin Advanced Nano Deposition Methods Новинка

Yuan Lin Advanced Nano Deposition Methods

12921.61 руб.
This concise reference summarizes the latest results in nano-structured thin films, the first to discuss both deposition methods and electronic applications in detail. Following an introduction to this rapidly developing field, the authors present a variety of organic and inorganic materials along with new deposition techniques, and conclude with an overview of applications and considerations for their technology deployment.
Nicolais Luigi Nanocomposites. In Situ Synthesis of Polymer-Embedded Nanostructures Nicolais Luigi Nanocomposites. In Situ Synthesis of Polymer-Embedded Nanostructures Новинка

Nicolais Luigi Nanocomposites. In Situ Synthesis of Polymer-Embedded Nanostructures

8411.42 руб.
A Step-by-step guide to the synthesis and characterization of metal-polymer nanocomposites Polymer nanocomposites, polymers that are reinforced with nano-sized particles, provide enhanced mechanical, thermal, electrical, and barrier properties. Continued research and development of new polymer nanocomposites promises to provide enhanced materials to a broad range of industries, such as plastics, aerospace, automotive, electronics, packaging, and biomedical devices. Structured as a practical laboratory manual, this book enables readers to expertly synthesize and characterize metal-polymer nanocomposites by clearly setting forth the principles and techniques. Nanocomposites: In Situ Synthesis of Polymer-Embedded Nanostructures features contributions from an international team of materials science and nanotechnology experts. Chapters reflect the authors' critical review of the literature as well as their own laboratory experience working with polymer nanocomposites. The book begins with a detailed introduction to the science, properties, and applications of metal-polymer nanocomposites. Next, it covers such topics as: Morphological and topological concepts Phase separation and nanoparticle aggregation Methods for the synthesis of nanocomposites Morphological control Characterization techniques and data analysis methods Toxicity considerations High-resolution images of metal nanoparticles, created by transmission electron microscopy, are provided throughout the book. There are also plenty of process schemes and detailed drawings, helping readers better understand how to synthesize, characterize, and use these composite materials. A bibliography at the end of each chapter provides a gateway to original research papers and reviews in the field. With its focus on the practical steps of synthesis and characterization, Nanocomposites: In Situ Synthesis of Polymer-Embedded Nanostructures is recommended for both students and practitioners in nanotechnology, polymer science, and materials science and engineering.
Daniel Arrigo J. Symmetry Analysis of Differential Equations. An Introduction Daniel Arrigo J. Symmetry Analysis of Differential Equations. An Introduction Новинка

Daniel Arrigo J. Symmetry Analysis of Differential Equations. An Introduction

7204.51 руб.
A self-contained introduction to the methods and techniques of symmetry analysis used to solve ODEs and PDEs Symmetry Analysis of Differential Equations: An Introduction presents an accessible approach to the uses of symmetry methods in solving both ordinary differential equations (ODEs) and partial differential equations (PDEs). Providing comprehensive coverage, the book fills a gap in the literature by discussing elementary symmetry concepts and invariance, including methods for reducing the complexity of ODEs and PDEs in an effort to solve the associated problems. Thoroughly class-tested, the author presents classical methods in a systematic, logical, and well-balanced manner. As the book progresses, the chapters graduate from elementary symmetries and the invariance of algebraic equations, to ODEs and PDEs, followed by coverage of the nonclassical method and compatibility. Symmetry Analysis of Differential Equations: An Introduction also features: Detailed, step-by-step examples to guide readers through the methods of symmetry analysis End-of-chapter exercises, varying from elementary to advanced, with select solutions to aid in the calculation of the presented algorithmic methods Symmetry Analysis of Differential Equations: An Introduction is an ideal textbook for upper-undergraduate and graduate-level courses in symmetry methods and applied mathematics. The book is also a useful reference for professionals in science, physics, and engineering, as well as anyone wishing to learn about the use of symmetry methods in solving differential equations.
Michael Cartwright Laser Ignition of Energetic Materials Michael Cartwright Laser Ignition of Energetic Materials Новинка

Michael Cartwright Laser Ignition of Energetic Materials

14956.59 руб.
The book gives an introduction to energetic materials and lasers, properties of such materials and the current methods for initiating energetic materials. The following chapters and sections highlight the properties of lasers, and safety aspects of their application. It covers the properties of in-service energetic materials, and also materials with prospects of being used as insensitive ammunitions in future weapon or missiles systems or as detonators in civilian (mining) applications. Because of the diversity of the topics some sections will naturally separate into different levels of expertise and knowledge.
K. Chandrashekhara Analysis and Performance of Fiber Composites K. Chandrashekhara Analysis and Performance of Fiber Composites Новинка

K. Chandrashekhara Analysis and Performance of Fiber Composites

10963.16 руб.
Updated and expanded coverage of the latest trends and developments in fiber composite materials, processes, and applications Analysis and Performance of Fiber Composites, Fourth Edition features updated and expanded coverage of all technical aspects of fiber composites, including the latest trends and developments in materials, manufacturing processes, and materials applications, as well as the latest experimental characterization methods. Fiber reinforced composite materials have become a fundamental part of modern product manufacturing. Routinely used in such high-tech fields as electronics, automobiles, aircraft, and space vehicles, they are also essential to everyday staples of modern life, such as containers, piping, and appliances. Little wonder, when one considers their ease of fabrication, outstanding mechanical properties, design versatility, light weight, corrosion and impact resistance, and excellent fatigue strength. This Fourth Edition of the classic reference—the standard text for composite materials courses, worldwide—offers an unrivalled review of such an important class of engineering materials. Still the most comprehensive, up-to-date treatment of the mechanics, materials, performance, analysis, fabrication, and characterization of fiber composite materials available, Analysis and Performance of Fiber Composites, Fourth Edition features: Expanded coverage of materials and manufacturing, with additional information on materials, processes, and material applications Updated and expanded information on experimental characterization methods—including many industry specific tests Discussions of damage identification techniques using nondestructive evaluation (NDE) Coverage of the influence of moisture on performance of polymer matrix composites, stress corrosion of glass fibers and glass reinforced plastics, and damage due to low-velocity impact New end-of-chapter problems and exercises with solutions found on an accompanying website Computer analysis of laminates No other reference provides such exhaustive coverage of fiber composites with such clarity and depth. Analysis and Performance of Fiber Composites, Fourth Edition is, without a doubt, an indispensable resource for practicing engineers, as well as students of mechanics, mechanical engineering, and aerospace engineering.
Sabu Thomas Handbook of Nanocellulose and Cellulose Nanocomposites, 2 Volume Set Sabu Thomas Handbook of Nanocellulose and Cellulose Nanocomposites, 2 Volume Set Новинка

Sabu Thomas Handbook of Nanocellulose and Cellulose Nanocomposites, 2 Volume Set

28583.27 руб.
An up-to-date and comprehensive overview summarizing recent achievements, the state of the art, and trends in research into nanocellulose and cellulose nanocomposites. Following an introduction, this ready references discusses the characterization as well surface modification of cellulose nanocomposites before going into details of the manufacturing and the self-assembly of such compounds. After a description of various alternatives, including thermoplastic, thermosetting, rubber, and fully green cellulose nanocomposites, the book continues with their mechanic and thermal properties, as well as crystallization and rheology behavior. A summary of spectroscopic and water sorption properties precedes a look at environmental health and safety of these nanocomposites. With its coverage of a wide variety of materials, important characterization tools and resulting applications, this is an essential reference for beginners as well as experienced researchers.
Ernesto Brunet Tailored Organic-Inorganic Materials Ernesto Brunet Tailored Organic-Inorganic Materials Новинка

Ernesto Brunet Tailored Organic-Inorganic Materials

11742.53 руб.
This book explores the limitless ability to design new materials by layering clay materials within organic compounds. Assembly, properties, characterization, and current and potential applications are offered to inspire the development of novel materials. Coincides with the government's Materials Genome Initiative, to inspire the development of green, sustainable, robust materials that lead to efficient use of limited resources Contains a thorough introductory and chemical foundation before delving into techniques, characterization, and properties of these materials Applications in biocatalysis, drug delivery, and energy storage and recovery are discussed Presents a case for an often overlooked hybrid material: organic-clay materials
Stoyko Fakirov Fundamentals of Polymer Science for Engineers Stoyko Fakirov Fundamentals of Polymer Science for Engineers Новинка

Stoyko Fakirov Fundamentals of Polymer Science for Engineers

10572.36 руб.
Filling a gap in the market, this textbook provides a concise, yet thorough introduction to polymer science for advanced engineering students and practitioners, focusing on the chemical, physical and materials science aspects that are most relevant for engineering applications. After covering polymer synthesis and properties, the major section of the book is devoted to polymeric materials, such as thermoplastics and polymer composites, polymer processing such as injection molding and extrusion, and methods for large-scale polymer characterization. The text concludes with an overview of engineering plastics. The emphasis throughout is on application-relevant topics, and the author focuses on real-life, industry-relevant polymeric materials.
José Pomposo A. Single-Chain Polymer Nanoparticles. Synthesis, Characterization, Simulations, and Applications José Pomposo A. Single-Chain Polymer Nanoparticles. Synthesis, Characterization, Simulations, and Applications Новинка

José Pomposo A. Single-Chain Polymer Nanoparticles. Synthesis, Characterization, Simulations, and Applications

14487.04 руб.
This first book on this important and emerging topic presents an overview of the very latest results obtained in single-chain polymer nanoparticles obtained by folding synthetic single polymer chains, painting a complete picture from synthesis via characterization to everyday applications. The initial chapters describe the synthetics methods as well as the molecular simulation of these nanoparticles, while subsequent chapters discuss the analytical techniques that are applied to characterize them, including size and structural characterization as well as scattering techniques. The final chapters are then devoted to the practical applications in nanomedicine, sensing, catalysis and several other uses, concluding with a look at the future for such nanoparticles. Essential reading for polymer and materials scientists, materials engineers, biochemists as well as environmental chemists.
Mohammed Khalid A.A. Pumps, Channels and Transporters. Methods of Functional Analysis Mohammed Khalid A.A. Pumps, Channels and Transporters. Methods of Functional Analysis Новинка

Mohammed Khalid A.A. Pumps, Channels and Transporters. Methods of Functional Analysis

9788.54 руб.
Describes experimental methods for investigating the function of pumps, channels and transporters Covers new emerging analytical methods used to study ion transport membrane proteins such as single-molecule spectroscopy Details a wide range of electrophysiological techniques and spectroscopic methods used to analyze the function of ion channels, ion pumps and transporters Covers state-of-the art analytical methods to study ion pumps, channels, and transporters, and where analytical chemistry can make further contributions
Ashutosh Tiwari Advanced Engineering Materials and Modeling Ashutosh Tiwari Advanced Engineering Materials and Modeling Новинка

Ashutosh Tiwari Advanced Engineering Materials and Modeling

17620.11 руб.
The engineering of materials with advanced features is driving the research towards the design of innovative materials with high performances. New materials often deliver the best solution for structural applications, precisely contributing towards the finest combination of mechanical properties and low weight. The mimicking of nature's principles lead to a new class of structural materials including biomimetic composites, natural hierarchical materials and smart materials. Meanwhile, computational modeling approaches are the valuable tools complementary to experimental techniques and provide significant information at the microscopic level and explain the properties of materials and their very existence. The modeling also provides useful insights to possible strategies to design and fabricate materials with novel and improved properties. The book brings together these two fascinating areas and offers a comprehensive view of cutting-edge research on materials interfaces and technologies the engineering materials. The topics covered in this book are divided into 2 parts: Engineering of Materials, Characterizations & Applications and Computational Modeling of Materials. The chapters include the following: Mechanical and resistance behavior of structural glass beams Nanocrystalline metal carbides – microstructure characterization SMA-reinforced laminated glass panel Sustainable sugarcane bagasse cellulose for papermaking Electrospun scaffolds for cardiac tissue engineering Bio-inspired composites Density functional theory for studying extended systems First principles based approaches for modeling materials Computer aided materials design Computational materials for stochastic electromagnets Computational methods for thermal analysis of heterogeneous materials Modelling of resistive bilayer structures Modeling tunneling of superluminal photons through Brain Microtubules Computer aided surgical workflow modeling Displaced multiwavelets and splitting algorithms
Jochen Voss An Introduction to Statistical Computing. A Simulation-based Approach Jochen Voss An Introduction to Statistical Computing. A Simulation-based Approach Новинка

Jochen Voss An Introduction to Statistical Computing. A Simulation-based Approach

7156.98 руб.
A comprehensive introduction to sampling-based methods in statistical computing The use of computers in mathematics and statistics has opened up a wide range of techniques for studying otherwise intractable problems. Sampling-based simulation techniques are now an invaluable tool for exploring statistical models. This book gives a comprehensive introduction to the exciting area of sampling-based methods. An Introduction to Statistical Computing introduces the classical topics of random number generation and Monte Carlo methods. It also includes some advanced methods such as the reversible jump Markov chain Monte Carlo algorithm and modern methods such as approximate Bayesian computation and multilevel Monte Carlo techniques An Introduction to Statistical Computing: Fully covers the traditional topics of statistical computing. Discusses both practical aspects and the theoretical background. Includes a chapter about continuous-time models. Illustrates all methods using examples and exercises. Provides answers to the exercises (using the statistical computing environment R); the corresponding source code is available online. Includes an introduction to programming in R. This book is mostly self-contained; the only prerequisites are basic knowledge of probability up to the law of large numbers. Careful presentation and examples make this book accessible to a wide range of students and suitable for self-study or as the basis of a taught course
Wolfgang Neumann Introduction to Crystal Growth and Characterization Wolfgang Neumann Introduction to Crystal Growth and Characterization Новинка

Wolfgang Neumann Introduction to Crystal Growth and Characterization

9710.53 руб.
This new textbook provides for the first time a comprehensive treatment of the basics of contemporary crystallography and crystal growth in a single volume. The reader will be familiarized with the concepts for the description of morphological and structural symmetry of crystals. The architecture of crystal structures of selected inorganic and molecular crystals is illustrated. The main crystallographic databases as data sources of crystal structures are described. Nucleation processes, their kinetics and main growth mechanism will be introduced in fundamentals of crystal growth. Some phase diagrams in the solid and liquid phases in correlation with the segregation of dopants are treated on a macro- and microscale. Fluid dynamic aspects with different types of convection in melts and solutions are discussed. Various growth techniques for semiconducting materials in connection with the use of external field (magnetic fields and microgravity) are described. Crystal characterization as the overall assessment of the grown crystal is treated in detail with respect to – crystal defects – crystal quality – field of application Introduction to Crystal Growth and Characterization is an ideal textbook written in a form readily accessible to undergraduate and graduate students of crystallography, physics, chemistry, materials science and engineering. It is also a valuable resource for all scientists concerned with crystal growth and materials engineering.
Qipeng Guo Polymer Morphology. Principles, Characterization, and Processing Qipeng Guo Polymer Morphology. Principles, Characterization, and Processing Новинка

Qipeng Guo Polymer Morphology. Principles, Characterization, and Processing

15270.86 руб.
With a focus on structure-property relationships, this book describes how polymer morphology affects properties and how scientists can modify them. The book covers structure development, theory, simulation, and processing; and discusses a broad range of techniques and methods. • Provides an up-to-date, comprehensive introduction to the principles and practices of polymer morphology • Illustrates major structure types, such as semicrystalline morphology, surface-induced polymer crystallization, phase separation, self-assembly, deformation, and surface topography • Covers a variety of polymers, such as homopolymers, block copolymers, polymer thin films, polymer blends, and polymer nanocomposites • Discusses a broad range of advanced and novel techniques and methods, like x-ray diffraction, thermal analysis, and electron microscopy and their applications in the morphology of polymer materials
Pedro Martins Magnetoelectric Polymer-Based Composites. Fundamentals and Applications Pedro Martins Magnetoelectric Polymer-Based Composites. Fundamentals and Applications Новинка

Pedro Martins Magnetoelectric Polymer-Based Composites. Fundamentals and Applications

12530.07 руб.
The first book on this topic provides a comprehensive and well-structured overview of the fundamentals, synthesis and emerging applications of magnetoelectric polymer materials. Following an introduction to the basic aspects of polymer based magnetoelectric materials and recent developments, subsequent chapters discuss the various types as well as their synthesis and characterization. There then follows a review of the latest applications, such as memories, sensors and actuators. The book concludes with a look at future technological advances. An essential reference for entrants to the field as well as for experienced researchers.
Dermot O'Hare Local Structural Characterisation. Inorganic Materials Series Dermot O'Hare Local Structural Characterisation. Inorganic Materials Series Новинка

Dermot O'Hare Local Structural Characterisation. Inorganic Materials Series

10414.86 руб.
Inorganic materials are at the heart of many contemporary real-world applications, in electronic devices, drug delivery, bio-inspired materials and energy storage and transport. In order to underpin novel synthesis strategies both to facilitate these applications and to encourage new ones, a thorough review of current and emerging techniques for materials characterisation is needed. Examining important techniques that allow investigation of the structures of inorganic materials on the local atomic scale, Local Structural Characterisation discusses: Solid-State NMR Spectroscopy X-Ray Absorption and Emission Spectroscopy Neutrons and Neutron Spectroscopy EPR Spectroscopy of Inorganic Materials Analysis of Functional Materials by X-Ray Photoelectron Spectroscopy This addition to the Inorganic Materials Series provides a detailed and thorough review of these spectroscopic techniques and emphasises the interplay between chemical synthesis and physical characterisation.
Frank Jensen Introduction to Computational Chemistry Frank Jensen Introduction to Computational Chemistry Новинка

Frank Jensen Introduction to Computational Chemistry

6954.13 руб.
Introduction to Computational Chemistry 3rd Edition provides a comprehensive account of the fundamental principles underlying different computational methods. Fully revised and updated throughout to reflect important method developments and improvements since publication of the previous edition, this timely update includes the following significant revisions and new topics: * Polarizable force fields * Tight-binding DFT * More extensive DFT functionals, excited states and time dependent molecular properties * Accelerated Molecular Dynamics methods * Tensor decomposition methods * Cluster analysis * Reduced scaling and reduced prefactor methods Additional information is available at: www.wiley.com/go/jensen/computationalchemistry3
David Cleary A. Principles of Inorganic Materials Design David Cleary A. Principles of Inorganic Materials Design Новинка

David Cleary A. Principles of Inorganic Materials Design

14252.26 руб.
Unique interdisciplinary approach enables readers to overcome complex design challenges Integrating concepts from chemistry, physics, materials science, metallurgy, and ceramics, Principles of Inorganic Materials Design, Second Edition offers a unique interdisciplinary approach that enables readers to grasp the complexities of inorganic materials. The book provides a solid foundation in the principles underlying the design of inorganic materials and then offers the guidance and tools needed to create specific materials with desired macroscopic properties. Principles of Inorganic Materials Design, Second Edition begins with an introduction to structure at the microscopic level and then progresses to smaller-length scales. Next, the authors explore both phenomenological and atomistic-level descriptions of transport properties, the metal?nonmetal transition, magnetic and dielectric properties, optical properties, and mechanical properties. Lastly, the book covers phase equilibria, synthesis, and nanomaterials. Special features include: Introduction to the CALPHAD method, an important, but often overlooked topic More worked examples and new end-of-chapter problems to help ensure mastery of the concepts Extensive references to the literature for more in-depth coverage of particular topics Biographies introducing twentieth-century pioneers in the field of inorganic materials science This Second Edition has been thoroughly revised and updated, incorporating the latest findings and featuring expanded discussions of such key topics as microstructural aspects, density functional theory, dielectric properties, mechanical properties, and nanomaterials. Armed with this text, students and researchers in inorganic and physical chemistry, physics, materials science, and engineering will be equipped to overcome today's complex design challenges. This textbook is recommended for senior-level undergraduate and graduate course work.
Yuliang Zhao Toxicology of Nanomaterials Yuliang Zhao Toxicology of Nanomaterials Новинка

Yuliang Zhao Toxicology of Nanomaterials

14879.32 руб.
This book provides the reader with a comprehensive view of analytical methods for nanotoxicology studies. After an introduction to nanomaterials and toxicological studies, the book discusses various characterization methods of nanomaterials and continues with the detection of nanoparticles in vivo as well as in vitro. A variety of techniques in molecular toxicology of nanomaterials is presented, followed by a detailed explanation of interaction between nanoparticles and biomacromolecules, including the structure-toxicity relationships of nanomaterials. Finally, the book concludes with the advantages and challenges of the analytical methods for nanotoxicology.
Freiman Stephen The Fracture of Brittle Materials. Testing and Analysis Freiman Stephen The Fracture of Brittle Materials. Testing and Analysis Новинка

Freiman Stephen The Fracture of Brittle Materials. Testing and Analysis

10932.09 руб.
Supports the use and development of strong, fracture-resistant, and mechanically reliable ceramic materials The Fracture of Brittle Materials thoroughly sets forth the key scientific and engineering concepts underlying the selection of test procedures for fracture toughness, strength determination, and reliability predictions. With this book as their guide, readers can confidently test and analyze a broad range of brittle materials in order to make the best use of existing materials as well as to support the development of new materials. The authors explain the importance of microstructure in these determinations and describe the use of quantitative fractography in failure analysis. The Fracture of Brittle Materials is relevant to a broad range of ceramic materials (i.e., any inorganic non-metal), including semiconductors, cements and concrete, oxides, carbides, and nitrides. The book covers such topics as: Basic principles of fracture mechanics underlying brittle material tests and analysis procedures Theory and mechanisms of environmentally enhanced crack growth Fracture mechanics tests to determine a material's resistance to fast fracture Test and analysis methods to assess the strength of ceramics Methods to analyze the fracture process based on quantitative measurements of the fracture surface Effect of a material's microstructure Methods for predicting the lifetime of brittle components under stress Throughout the book, figures and illustrations help readers understand key concepts and methods. Replete with real-world examples, this text enables engineers and materials and ceramics scientists to select and implement the optimal testing methods for their particular research needs and then accurately analyze the results.
Dongyuan Zhao Ordered Mesoporous Materials Dongyuan Zhao Ordered Mesoporous Materials Новинка

Dongyuan Zhao Ordered Mesoporous Materials

16758.27 руб.
Mesoporous materials are a class of molecules with a large and uniform pore size, highly regular nanopores, and a large surface area. This book is devoted to all aspects and types of these materials and describes, in an in-depth and systematic manner, the step-by-step synthesis and its mechanism, as well as the characterization, morphology control, hybridization, and applications, of mesoporous molecular sieves. In so doing, it covers silicates, metal-doped silicates, nonsilicates, and organic-inorganic hybrids. Although the emphasis is on synthesis, the expert authors also discuss characterization and applications, ranging from catalysis and biochemistry to optics and the use of these materials as templates for nanomaterial synthesis. Both the fundamentals and the latest research results are covered, ensuring that this monograph serves as a reference for researchers in and newcomers to the field.
Guozheng Kang Cyclic Plasticity of Engineering Materials. Experiments and Models Guozheng Kang Cyclic Plasticity of Engineering Materials. Experiments and Models Новинка

Guozheng Kang Cyclic Plasticity of Engineering Materials. Experiments and Models

12290.84 руб.
New contributions to the cyclic plasticity of engineering materials Written by leading experts in the field, this book provides an authoritative and comprehensive introduction to cyclic plasticity of metals, polymers, composites and shape memory alloys. Each chapter is devoted to fundamentals of cyclic plasticity or to one of the major classes of materials, thereby providing a wide coverage of the field. The book deals with experimental observations on metals, composites, polymers and shape memory alloys, and the corresponding cyclic plasticity models for metals, polymers, particle reinforced metal matrix composites and shape memory alloys. Also, the thermo-mechanical coupled cyclic plasticity models are discussed for metals and shape memory alloys. Key features: Provides a comprehensive introduction to cyclic plasticity Presents Macroscopic and microscopic observations on the ratchetting of different materials Establishes cyclic plasticity constitutive models for different materials. Analysis of cyclic plasticity in engineering structures. This book is an important reference for students, practicing engineers and researchers who study cyclic plasticity in the areas of mechanical, civil, nuclear, and aerospace engineering as well as materials science.
Panos Seferlis Process Systems and Materials for CO2 Capture. Modelling, Design, Control and Integration Panos Seferlis Process Systems and Materials for CO2 Capture. Modelling, Design, Control and Integration Новинка

Panos Seferlis Process Systems and Materials for CO2 Capture. Modelling, Design, Control and Integration

19186.28 руб.
This comprehensive volume brings together an extensive collection of systematic computer-aided tools and methods developed in recent years for CO2 capture applications, and presents a structured and organized account of works from internationally acknowledged scientists and engineers, through: Modeling of materials and processes based on chemical and physical principles Design of materials and processes based on systematic optimization methods Utilization of advanced control and integration methods in process and plant-wide operations The tools and methods described are illustrated through case studies on materials such as solvents, adsorbents, and membranes, and on processes such as absorption / desorption, pressure and vacuum swing adsorption, membranes, oxycombustion, solid looping, etc. Process Systems and Materials for CO2 Capture: Modelling, Design, Control and Integration should become the essential introductory resource for researchers and industrial practitioners in the field of CO2 capture technology who wish to explore developments in computer-aided tools and methods. In addition, it aims to introduce CO2 capture technologies to process systems engineers working in the development of general computational tools and methods by highlighting opportunities for new developments to address the needs and challenges in CO2 capture technologies.
Tore Brinck Green Energetic Materials Tore Brinck Green Energetic Materials Новинка

Tore Brinck Green Energetic Materials

13370.18 руб.
Since the end of the 20th century it has been increasingly realised that the use, or production, of many energetic materials leads to the release of substances which are harmful to both humans and the environment. To address this, the principles of green chemistry can be applied to the design of new products and their manufacturing processes, to create green energetic materials that are virtually free of environmental hazards and toxicity issues during manufacturing, storage, use and disposal. Active research is underway to develop new ingredients and formulations, green synthetic methods and non-polluting manufacturing processes. Green Energetic Materials provides a detailed account of the most recent research and developments in the field, including green pyrotechnics, explosives and propellants. From theoretical modelling and design of new materials, to the development of sustainable manufacturing processes, this book addresses materials already on the production line, as well as considering future developments in this evolving field. Topics covered include: Theoretical design of green energetic materials Development of green pyrotechnics Green primary and secondary explosives Oxidisers and binder materials for green propellants Environmentally sustainable manufacturing technologies for energetic materials Electrochemical methods for synthesis of energetic materials and waste remediation Green Energetic Materials is a valuable resource for academic, industrial and governmental researchers working on the development of energetic materials, for both military and civilian applications.
Grigorios Dimitriadis Introduction to Nonlinear Aeroelasticity Grigorios Dimitriadis Introduction to Nonlinear Aeroelasticity Новинка

Grigorios Dimitriadis Introduction to Nonlinear Aeroelasticity

10611 руб.
Introduces the latest developments and technologies in the area of nonlinear aeroelasticity Nonlinear aeroelasticity has become an increasingly popular research area in recent years. There have been many driving forces behind this development, increasingly flexible structures, nonlinear control laws, materials with nonlinear characteristics, etc. Introduction to Nonlinear Aeroelasticity covers the theoretical basics in nonlinear aeroelasticity and applies the theory to practical problems. As nonlinear aeroelasticity is a combined topic, necessitating expertise from different areas, the book introduces methodologies from a variety of disciplines such as nonlinear dynamics, bifurcation analysis, unsteady aerodynamics, non-smooth systems and others. The emphasis throughout is on the practical application of the theories and methods, so as to enable the reader to apply their newly acquired knowledge. Key features: Covers the major topics in nonlinear aeroelasticity, from the galloping of cables to supersonic panel flutter. Discusses nonlinear dynamics, bifurcation analysis, numerical continuation, unsteady aerodynamics and non-smooth systems. Considers the practical application of the theories and methods. Covers nonlinear dynamics, bifurcation analysis and numerical methods. Accompanied by a website hosting Matlab code. Introduction to Nonlinear Aeroelasticity is a comprehensive reference for researchers and workers in industry and is also a useful introduction to the subject for graduate and undergraduate students across engineering disciplines.
Ashutosh Tiwari Advanced Functional Materials Ashutosh Tiwari Advanced Functional Materials Новинка

Ashutosh Tiwari Advanced Functional Materials

15270.86 руб.
Because of their unique properties (size, shape, and surface functions), functional materials are gaining significant attention in the areas of energy conversion and storage, sensing, electronics, photonics, and biomedicine. Within the chapters of this book written by well-known researchers, one will find the range of methods that have been developed for preparation and functionalization of organic, inorganic and hybrid structures which are the necessary building blocks for the architecture of various advanced functional materials. The book discusses these innovative methodologies and research strategies, as well as provides a comprehensive and detailed overview of the cutting-edge research on the processing, properties and technology developments of advanced functional materials and their applications. Specifically, Advanced Functional Materials: Compiles the objectives related to functional materials and provides detailed reviews of fundamentals, novel production methods, and frontiers of functional materials, including metalic oxides, conducting polymers, carbon nanotubes, discotic liquid crystalline dimers, calixarenes, crown ethers, chitosan and graphene. Discusses the production and characterization of these materials, while mentioning recent approaches developed as well as their uses and applications for sensitive chemiresistors, optical and electronic materials, solar hydrogen generation, supercapacitors, display and organic light-emitting diodes, functional adsorbents, and antimicrobial and biocompatible layer formation. This volume in the Advanced Materials Book Series includes twelve chapters divided into two main areas: Part 1: Functional Metal Oxides: Architecture, Design and Applications and Part 2: Multifunctional Hybrid Materials: Fundamentals and Frontiers
Ketil Motzfeldt High Temperature Experiments in Chemistry and Materials Science Ketil Motzfeldt High Temperature Experiments in Chemistry and Materials Science Новинка

Ketil Motzfeldt High Temperature Experiments in Chemistry and Materials Science

15729.62 руб.
Cutting edge high temperature materials include high temperature superconductors, solid oxide fuel cells, thermoelectric materials and ultrahigh temperature construction materials (including metals, cermets and ceramics) and have applications in key areas such as energy, transportation and space technologies. This book introduces the concepts which underpin research into these critical materials including thermodynamics, kinetics and various physical, chemical and modelling techniques with a focus on practical “how to” methods and covers: Introduction to High Temperature Research Basic Design of High Temperature Furnaces Temperature Measurement Radiation Pyrometry Refractory Materials in the Laboratory Vacuum in Theory and Practice The Design of Vacuum Furnaces and Thermobalances With highly detailed instrument illustrations and an emphasis on the control and measurement of the fundamental properties of temperature, pressure and mass, High Temperature Experiments in Chemistry and Materials Science provides a practical reference on high temperature measurements, for researchers, advanced students and those working in academic or industrial laboratories. Introduction to High Temperature Research Basic Design of High Temperature Furnaces Temperature Measurement Radiation Pyrometry Refractory Materials in the Laboratory Vacuum in Theory and Practice The Design of Vacuum Furnaces and Thermobalances
Zhypargul Abdullaeva Nano- and Biomaterials. Compounds, Properties, Characterization, and Applications Zhypargul Abdullaeva Nano- and Biomaterials. Compounds, Properties, Characterization, and Applications Новинка

Zhypargul Abdullaeva Nano- and Biomaterials. Compounds, Properties, Characterization, and Applications

13312.41 руб.
A comprehensive introduction to nano- and biomaterials shining light on the different research disciplines from various perspectives. The straightforward and well-structured concept is designed to cater for entrants as well as experienced researchers in the field of nanotechnology. The initial chapters introduce nanomaterials, their classification and synthesis techniques, while subsequent chapters discuss the various characterization tools as well as mechanical properties and their applications in biotechnological and biomedical fields. Further understanding of the topic is supported by case studies used for practical purposes. The book concludes with a look at future technology advances. With its explanation of a wide variety of materials, this is an essential reference for chemists, physicists, materials scientists and biomedical engineers.
Jacek Lipkowski Diffraction and Spectroscopic Methods in Electrochemistry Jacek Lipkowski Diffraction and Spectroscopic Methods in Electrochemistry Новинка

Jacek Lipkowski Diffraction and Spectroscopic Methods in Electrochemistry

21378.76 руб.
This ninth volume in the series concentrates on in situ spectroscopic methods and combines a balanced mixture of theory and applications, making it highly readable for chemists and physicists, as well as for materials scientists and engineers. As with the previous volumes, all the chapters continue the high standards of this series, containing numerous references to further reading and the original literature, for easy access to this new field. The editors have succeeded in selecting highly topical areas of research and in presenting authors who are leaders in their fields, covering such diverse topics as diffraction studies of the electrode-solution interface, thin organic films at electrode surfaces, linear and non-linear spectroscopy as well as sum frequency generation studies of the electrified solid-solution interface, plus quantitative SNIFTIRS and PM-IRRAS. Special attention is paid to recent advances and developments, which are critically and thoroughly discussed. The result is a compelling set of reviews, serving equally well as an excellent and up-to-date source of information for experienced researchers in the field, as well as as an introduction for newcomers.
Lin Xiao Bioinspired Materials Science and Engineering Lin Xiao Bioinspired Materials Science and Engineering Новинка

Lin Xiao Bioinspired Materials Science and Engineering

12780.32 руб.
An authoritative introduction to the science and engineering of bioinspired materials Bioinspired Materials Science and Engineering offers a comprehensive view of the science and engineering of bioinspired materials and includes a discussion of biofabrication approaches and applications of bioinspired materials as they are fed back to nature in the guise of biomaterials. The authors also review some biological compounds and shows how they can be useful in the engineering of bioinspired materials. With contributions from noted experts in the field, this comprehensive resource considers biofabrication, biomacromolecules, and biomaterials. The authors illustrate the bioinspiration process from materials design and conception to application of bioinspired materials. In addition, the text presents the multidisciplinary aspect of the concept, and contains a typical example of how knowledge is acquired from nature, and how in turn this information contributes to biological sciences, with an accent on biomedical applications. This important resource: Offers an introduction to the science and engineering principles for the development of bioinspired materials Includes a summary of recent developments on biotemplated formation of inorganic materials using natural templates Illustrates the fabrication of 3D-tumor invasion models and their potential application in drug assessments Explores electroactive hydrogels based on natural polymers Contains information on turning mechanical properties of protein hydrogels for biomedical applications Written for chemists, biologists, physicists, and engineers, Bioinspired Materials Science and Engineering contains an indispensible resource for an understanding of bioinspired materials science and engineering.
Sisson Adam Handbook of Biodegradable Polymers. Isolation, Synthesis, Characterization and Applications Sisson Adam Handbook of Biodegradable Polymers. Isolation, Synthesis, Characterization and Applications Новинка

Sisson Adam Handbook of Biodegradable Polymers. Isolation, Synthesis, Characterization and Applications

16830.7 руб.
A comprehensive overview of biodegradable polymers, covering everything from synthesis, characterization, and degradation mechanisms while also introducing useful applications, such as drug delivery systems and biomaterial-based regenerative therapies. An introductory section deals with such fundamentals as basic chemical reactions during degradation, the complexity of biological environments and experimental methods for monitoring degradation processes. The result is a reliable reference source for those wanting to learn more about this important class of polymer materials, as well as scientists in the field seeking a deeper insight.
Tatsuki Ohji Advances in Materials Science for Environmental and Energy Technologies VI Tatsuki Ohji Advances in Materials Science for Environmental and Energy Technologies VI Новинка

Tatsuki Ohji Advances in Materials Science for Environmental and Energy Technologies VI

17620.11 руб.
An excellent one-volume resource for understanding the most important current issues in the research and advances in materials science for environmental and energy technologies This proceedings volume contains a collection of 20 papers from the 2016 Materials Science and Technology (MS&T'16) meeting held in Salt Lake City, UT, from October 24-27 of that year. These conference symposia provided a forum for scientists, engineers, and technologists to discuss and exchange state-of-the-art ideas, information, and technology on advanced methods and approaches for processing, synthesis, characterization, and applications of ceramics, glasses, and composites. Topics covered include: the 8th International Symposium on Green and Sustainable Technologies for Materials Manufacturing Processing; Materials Issues in Nuclear Waste Management in the 21st Century; Construction and Building Materials for a Better Environment; Materials for Nuclear Applications and Extreme Environments; Nanotechnology for Energy, Healthcare, and Industry; and Materials for Processes for CO2 Capture, Conversion and Sequestration. Logically organized and carefully selected articles give insight into advances in materials science for environmental and energy technologies. Incorporates the latest developments related to advances in materials science for environmental and energy technologies Advances in Materials Science for Environmental and Energy Technologies VI: Ceramic Transactions Volume 262 is ideal for academics in mechanical and chemical engineering, materials and or ceramics, chemistry departments and for those working in government laboratories.
Mitsuo Tasumi Introduction to Experimental Infrared Spectroscopy. Fundamentals and Practical Methods Mitsuo Tasumi Introduction to Experimental Infrared Spectroscopy. Fundamentals and Practical Methods Новинка

Mitsuo Tasumi Introduction to Experimental Infrared Spectroscopy. Fundamentals and Practical Methods

6107.9 руб.
Infrared spectroscopy is generally understood to mean the science of spectra relating to infrared radiation, namely electromagnetic waves, in the wavelength region occurring intermediately between visible light and microwaves. Measurements of infrared spectra have been providing useful information, for a variety of scientific research and industrial studies, for over half a century; this is set to continue in the foreseeable future. Introduction to Experimental Infrared Spectroscopy is intended to be a handy guide for those who have no, or limited, experience in infrared spectroscopic measurements but are utilising infrared-related methods for their research or in practical applications. Written by leading researchers and experienced practitioners, this work consists of 22 chapters and presents the basic theory, methodology and practical measurement methods, including ATR, photoacoustic, IR imaging, NIR, 2D-COS, and VCD. The six Appendices will aid readers in understanding the concepts presented in the main text. Written in an easy-to-understand way this book is suitable for students, researchers and technicians working with infrared spectroscopy and related methods.
Vijay Thakur Kumar Handbook of Composites from Renewable Materials, Physico-Chemical and Mechanical Characterization Vijay Thakur Kumar Handbook of Composites from Renewable Materials, Physico-Chemical and Mechanical Characterization Новинка

Vijay Thakur Kumar Handbook of Composites from Renewable Materials, Physico-Chemical and Mechanical Characterization

21535.53 руб.
The Handbook of Composites From Renewable Materials comprises a set of 8 individual volumes that brings an interdisciplinary perspective to accomplish a more detailed understanding of the interplay between the synthesis, structure, characterization, processing, applications and performance of these advanced materials. The handbook covers a multitude of natural polymers/ reinforcement/ fillers and biodegradable materials. Together, the 8 volumes total at least 5000 pages and offers a unique publication. This 3rd volume of the Handbook is solely focused on the Physico-Chemical and Mechanical Characterization of renewable materials. Some of the important topics include but not limited to: structural and biodegradation characterization of supramolecular PCL/HAP nano-composites; different characterization of solid bio-fillers based agricultural waste material; poly (ethylene-terephthalate) reinforced with hemp fibers; poly (lactic acid) thermoplastic composites from renewable materials; chitosan –based composite materials: fabrication and characterization; the use of flax fiber reinforced polymer (FFRP) composites in the externally reinforced structures for seismic retrofitting monitored by transient thermography and optical techniques; recycling and reuse of fiber reinforced polymer wastes in concrete composite materials; analysis of damage in hybrid composites subjected to ballistic impacts; biofiber reinforced acrylated epoxidized soybean oil (AESO) biocomposites; biopolyamides and high performance natural fiber-reinforced biocomposites; impact of recycling on the mechanical and thermo-mechanical properties of wood fiber based HDPE and PLA composites; lignocellulosic fibers composites: an overview; biodiesel derived raw glycerol to value added products; thermo-mechanical characterization of sustainable structural composites; novel pH sensitive composite hydrogel based on functionalized starch/clay for the controlled release of amoxicillin; preparation and characterization of biobased thermoset polymers from renewable resources; influence of natural fillers size and shape into mechanical and barrier properties of biocomposites; composite of biodegradable polymer blends of PCL/PLLA and coconut fiber – the effects of ionizing radiation; packaging composite materials from renewable resources; physicochemical properties of ash based geopolymer concrete; a biopolymer derived from castor oil polyurethane; natural polymer based biomaterials; physical and mechanical properties of polymer membranes from renewable resources
Oliver Gywat Spins in Optically Active Quantum Dots. Concepts and Methods Oliver Gywat Spins in Optically Active Quantum Dots. Concepts and Methods Новинка

Oliver Gywat Spins in Optically Active Quantum Dots. Concepts and Methods

8927.44 руб.
Filling a gap in the literature, this up-to-date introduction to the field provides an overview of current experimental techniques, basic theoretical concepts, and sample fabrication methods. Following an introduction, this monograph deals with optically active quantum dots and their integration into electro-optical devices, before looking at the theory of quantum confined states and quantum dots interacting with the radiation field. Final chapters cover spin-spin interaction in quantum dots as well as spin and charge states, showing how to use single spins for break-through quantum computation. A conclusion and outlook round off the volume. The result is a primer providing the essential basic knowledge necessary for young researchers entering the field, as well as semiconductor and theoretical physicists, PhD students in physics and material sciences, electrical engineers and materials scientists.
Siegfied Eigler Graphene Oxide. Fundamentals and Applications Siegfied Eigler Graphene Oxide. Fundamentals and Applications Новинка

Siegfied Eigler Graphene Oxide. Fundamentals and Applications

13703.95 руб.
Due to its unique properties, graphene oxide has become one of the most studied materials of the last decade and a great variety of applications have been reported in areas such as sensors, catalysis and biomedical applications. This comprehensive volume systematically describes the fundamental aspects and applications of graphene oxide. The book is designed as an introduction to the topic, so each chapter begins with a discussion on fundamental concepts, then proceeds to review and summarize recent advances in the field. Divided into two parts, the first part covers fundamental aspects of graphene oxide and includes chapters on formation and chemical structure, characterization methods, reduction methods, rheology and optical properties of graphene oxide solutions. Part Two covers numerous graphene oxide applications including field effect transistors, transparent conductive films, sensors, energy harvesting and storage, membranes, composite materials, catalysis and biomedical applications. In each case the differences and advantages of graphene oxide over its non-oxidised counterpart are discussed. The book concludes with a chapter on the challenges of industrial-scale graphene oxide production. Graphene Oxide: Fundamentals and Applications is a valuable reference for academic researchers, and industry scientists interested in graphene oxide, graphene and other carbon materials.
Qiang Zhang Advanced Hierarchical Nanostructured Materials Qiang Zhang Advanced Hierarchical Nanostructured Materials Новинка

Qiang Zhang Advanced Hierarchical Nanostructured Materials

15819.17 руб.
An overview of the recent developments and prospects in this highly topical area, covering the synthesis, characterization, properties and applications of hierarchical nanostructured materials. The book concentrates on those materials relevant for research and development in the fields of energy, biomedicine and environmental protection, with a strong focus on 3D materials based on nanocarbons, mesoporous silicates, hydroxides, core-shell particles and helical nanostructures. Thanks to its clear concept and application-oriented approach, this is an essential reference for experienced researchers and newcomers to the field alike.
Xiang Liu Yang Soft Fibrillar Materials. Fabrication and Applications Xiang Liu Yang Soft Fibrillar Materials. Fabrication and Applications Новинка

Xiang Liu Yang Soft Fibrillar Materials. Fabrication and Applications

13782.71 руб.
As one of the most important classes of soft materials, supramolecular materials are of a mixture of networks of molecular chains/fibrils and a liquid. These self-assembled fibrous/ molecular architectures exhibit various functionalities, ie. superhydrophobicity or superior mechanical strength, etc. and consist of the controllable structures. They can be functioned via micro/nano engineering, to have some particular added functions, ie. emission materials, tissue engineering scaffolds, bio imaging and sensing materials etc. They have therefore found broad applications in photography, cosmetics, food and petroleum industries and not the least in the biomedical sector where there is strong interest in these materials as drug delivery agents. The book covers the most important soft functional materials, including small molecule physical gels, silkworm silk and spider silk fibers and functional fibers, with respect both to the fundamentals and to development and engineering methods. It provides the reader with the necessary knowledge on the chemical and physical formation mechanisms of these materials and demonstrates that one can rationally design and tune the fibrillar networks so that the resulting materials exhibit the desired functionalities. This work is a must-have for all Materials Scientists, Polymer Chemists, Condensed Matter Physicists, and Biotechnologists working in this interdisciplinary field.
Dermot O'Hare Structure from Diffraction Methods. Inorganic Materials Series Dermot O'Hare Structure from Diffraction Methods. Inorganic Materials Series Новинка

Dermot O'Hare Structure from Diffraction Methods. Inorganic Materials Series

9788.54 руб.
Inorganic materials show a diverse range of important properties that are desirable for many contemporary, real-world applications. Good examples include recyclable battery cathode materials for energy storage and transport, porous solids for capture and storage of gases and molecular complexes for use in electronic devices. An understanding of the function of these materials is necessary in order to optimise their behaviour for real applications, hence the importance of 'structure–property relationships'. The chapters presented in this volume deal with recent advances in the characterisation of crystalline materials. They include some familiar diffraction methods, thoroughly updated with modern advances. Also included are techniques that can now probe details of the three-dimensional arrangements of atoms in nanocrystalline solids, allowing aspects of disorder to be studied. Small-angle scattering, a technique that is often overlooked, can probe both ordered and disordered structures of materials at longer length scales than those probed by powder diffraction methods. Addressing both physical principals and recent advances in their applications, Structure from Diffraction Methods covers: Powder Diffraction X-Ray and Neutron Single-Crystal Diffraction PDF Analysis of Nanoparticles Electron Crystallography Small-Angle Scattering Ideal as a complementary reference work to other volumes in the series (Local Structural Characterisation and Multi Length-Scale Characterisation), or as an examination of the specific characterisation techniques in their own right, Structure from Diffraction Methods is a valuable addition to the Inorganic Materials Series.
Guldi Dirk M. Carbon Nanotubes and Related Structures. Synthesis, Characterization, Functionalization, and Applications Guldi Dirk M. Carbon Nanotubes and Related Structures. Synthesis, Characterization, Functionalization, and Applications Новинка

Guldi Dirk M. Carbon Nanotubes and Related Structures. Synthesis, Characterization, Functionalization, and Applications

18796.9 руб.
Written by the most prominent experts and pioneers in the field, this ready reference combines fundamental research, recent breakthroughs and real-life applications in one well-organized treatise. As such, both newcomers and established researchers will find here a wide range of current methods for producing and characterizing carbon nanotubes using imaging as well as spectroscopic techniques. One major part of this thorough overview is devoted to the controlled chemical functionalization of carbon nanotubes, covering intriguing applications in photovoltaics, organic electronics and materials design. The latest research on novel carbon-derived structures, such as graphene, nanoonions and carbon pea pods, round off the book.
Andreas Ochsner Cellular and Porous Materials. Thermal Properties Simulation and Prediction Andreas Ochsner Cellular and Porous Materials. Thermal Properties Simulation and Prediction Новинка

Andreas Ochsner Cellular and Porous Materials. Thermal Properties Simulation and Prediction

22552.64 руб.
Providing the reader with a solid understanding of the fundamentals as well as an awareness of recent advances in properties and applications of cellular and porous materials, this handbook and ready reference covers all important analytical and numerical methods for characterizing and predicting thermal properties. In so doing it directly addresses the special characteristics of foam-like and hole-riddled materials, combining theoretical and experimental aspects for characterization purposes.
Kunhao Li Mesoporous Zeolites. Preparation, Characterization and Applications Kunhao Li Mesoporous Zeolites. Preparation, Characterization and Applications Новинка

Kunhao Li Mesoporous Zeolites. Preparation, Characterization and Applications

12303.47 руб.
Authored by a top-level team of both academic and industrial researchers in the field, this is an up-to-date review of mesoporous zeolites. The leading experts cover novel preparation methods that allow for a purpose-oriented fine-tuning of zeolite properties, as well as the related materials, discussing the specific characterization methods and the applications in close relation to each individual preparation approach. The result is a self-contained treatment of the different classes of mesoporous zeolites. With its academic insights and practical relevance this is a comprehensive handbook for researchers in the field and related areas, as well as for developers from the chemical industry.

кешбака
Страницы:


The Handbook of Composites From Renewable Materials comprises a set of 8 individual volumes that brings an interdisciplinary perspective to accomplish a more detailed understanding of the interplay between the synthesis, structure, characterization, processing, applications and performance of these advanced materials. The handbook covers a multitude of natural polymers/ reinforcement/ fillers and biodegradable materials. Together, the 8 volumes total at least 5000 pages and offers a unique publication. This 3rd volume of the Handbook is solely focused on the Physico-Chemical and Mechanical Characterization of renewable materials. Some of the important topics include but not limited to: structural and biodegradation characterization of supramolecular PCL/HAP nano-composites; different characterization of solid bio-fillers based agricultural waste material; poly (ethylene-terephthalate) reinforced with hemp fibers; poly (lactic acid) thermoplastic composites from renewable materials; chitosan –based composite materials: fabrication and characterization; the use of flax fiber reinforced polymer (FFRP) composites in the externally reinforced structures for seismic retrofitting monitored by transient thermography and optical techniques; recycling and reuse of fiber reinforced polymer wastes in concrete composite materials; analysis of damage in hybrid composites subjected to ballistic impacts; biofiber reinforced acrylated epoxidized soybean oil (AESO) biocomposites; biopolyamides and high performance natural fiber-reinforced biocomposites; impact of recycling on the mechanical and thermo-mechanical properties of wood fiber based HDPE and PLA composites; lignocellulosic fibers composites: an overview; biodiesel derived raw glycerol to value added products; thermo-mechanical characterization of sustainable structural composites; novel pH sensitive composite hydrogel based on functionalized starch/clay for the controlled release of amoxicillin; preparation and characterization of biobased thermoset polymers from renewable resources; influence of natural fillers size and shape into mechanical and barrier properties of biocomposites; composite of biodegradable polymer blends of PCL/PLLA and coconut fiber – the effects of ionizing radiation; packaging composite materials from renewable resources; physicochemical properties of ash based geopolymer concrete; a biopolymer derived from castor oil polyurethane; natural polymer based biomaterials; physical and mechanical properties of polymer membranes from renewable resources
Продажа yang leng materials characterization introduction to microscopic and spectroscopic methods лучших цены всего мира
Посредством этого сайта магазина - каталога товаров мы очень легко осуществляем продажу yang leng materials characterization introduction to microscopic and spectroscopic methods у одного из интернет-магазинов проверенных фирм. Определитесь с вашими предпочтениями один интернет-магазин, с лучшей ценой продукта. Прочитав рекомендации по продаже yang leng materials characterization introduction to microscopic and spectroscopic methods легко охарактеризовать производителя как превосходную и доступную фирму.